Découvrez nos produits Depot Drop hebdomadaires - En ligne seulement + livraison gratuite!  Magasiner maintenant

Aperçu

Modèle # 48-32-8000 Internet # 1001183824

Milwaukee onde de choc d'impact Duty Extracteurs sont conçus avec une géométrie optimisée pour saisir et retirer le coincé, le plus exigeant arrondi sur, rouillé, peint, dépouillé et endommagé attaches. Inclus avec cet ensemble sont (5) 3/8 po. Carré d'entraînement des extracteurs de droits d'impact pour les têtes de fixation de taille communes à ainsi qu'un 3/8 adaptateur de prise carré d'onde de choc jusqu'à 30X vie pour une utilisation chez les conducteurs d'impact de changement rapide. Les bits comportent des anneaux à code couleur pour une identification de taille rapide et facile et un support de rétention pour les organiser. De façon générale ciblant les utilisateurs sans fil, les applications d'impact ligne accessoire Duty impact SHOCKWAVE est non seulement idéal pour lourds, mais offre une solution complète du système pour tous les forages de l'utilisateur et les besoins de fixation.

  1. géométrie optimisée pour une prise sûre sur les fixations rouillées ou endommagées
  1. extracteurs de droits d'impact avec 3/8 po de route et l'adaptateur de prise d'ondes de choc inclus
  1. bande code couleur pour une identification facile taille
  1. Porte de rétention pour garder les bits organisés
  1. Pour les fixations de taille communes 1/4po à 1/2po
  1. Pour une utilisation avec une variété d'outils

Spécifications

Dimensions

Hauteur assemblé (en pouces)
3.58
Hauteur de l’emballage (en pouces)
1.3
Largeur assemblée (en pouces)
6.3
Largeur de l’emballage (en pouces)
6.3
Poids assemblé (en livres)
0.46
Poids de l’emballage (en livres)
0.38
Profondeur assemblé (en pouces)
1.28
Profondeur de l’emballage (en pouces)
3.6

Détails

Famille de couleurs
Multicolore
Longueur hors tout (en po)
1.13
Nombre de pièces dans l'ensemble
6
Pays d'origine
CN-China

Garanties et certifications

Pour plus d'informations s'il vous plaît le service à la clientèle au 1 800-268-4015
Kit d'extracteur Shockwave Impact Duty (6 pièces)Milwaukee Tool Kit d'extracteur Shockwave Impact Duty (6 pièces)Milwaukee onde de choc d'impact Duty Extracteurs sont conçus avec une géométrie optimisée pour saisir et retirer le coincé, le plus exigeant arrondi sur, rouillé, peint, dépouillé et endommagé attaches. Inclus avec cet ensemble sont (5) 3/8 po. Carré d'entraînement des extracteurs de droits d'impact pour les têtes de fixation de taille communes à ainsi qu'un 3/8 adaptateur de prise carré d'onde de choc jusqu'à 30X vie pour une utilisation chez les conducteurs d'impact de changement rapide. Les bits comportent des anneaux à code couleur pour une identification de taille rapide et facile et un support de rétention pour les organiser. De façon générale ciblant les utilisateurs sans fil, les applications d'impact ligne accessoire Duty impact SHOCKWAVE est non seulement idéal pour lourds, mais offre une solution complète du système pour tous les forages de l'utilisateur et les besoins de fixation.
Milwaukee Tool
1001183824
Kit d'extracteur Shockwave Impact Duty (6 pièces) est évalué 3.8 de 5 de 101.
  • y_2024, m_6, d_21, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_20, tr_81
  • loc_fr_CA, sid_1001183824, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 86ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Received this extractor set and I have to say it does appear to made with the same Milwaukee qual... [This review was collected as part of a promotion.] Received this extractor set and I have to say it does appear to made with the same Milwaukee quality you can expect. It is color coded to easily identify the required size for the fastener that you are trying to remove. I have seen several other versions of this from other manufacturers and didn't have much success. It would typically round over the head and make the fastener unable to be extracted without drilling. This set seems to have increased the chances successfully removing the fastener.
Date de publication: 2017-10-31
Rated 4 de 5 de par The impact extractor set worked for a few stubborn bolts that I had. Our swing set is open to all... [This review was collected as part of a promotion.] The impact extractor set worked for a few stubborn bolts that I had. Our swing set is open to all the MN elements including extreme cold and heat. I was able to easily loosen and remove a couple bolts. After removing them I replaced. I did notice a little marring on the wood so keep that in mind when you are using this tool. If you are in need of extracting a bolt, this will do it but there might be a little surface damage to your material.
Date de publication: 2017-11-28
Rated 5 de 5 de par Great little set for a specific purpose. You have to have the right need for the product to be u... [This review was collected as part of a promotion.] Great little set for a specific purpose. You have to have the right need for the product to be useful but if thats what you need it for it will work well. They are primarily designed to remove bolts that have enough of a surface for you to grab it with this extractor. Its great for rounded heads or otherwise mangled heads. If thats what your problem is then this if for you.
Date de publication: 2017-11-08
Rated 5 de 5 de par I was skeptical about using these extractors, as they look funny. Nonetheless, they do their job ... [This review was collected as part of a promotion.] I was skeptical about using these extractors, as they look funny. Nonetheless, they do their job as I found out and are VERY strong, being impact-rated. Stripped bolts can turn a good day into a bad one. They can turn a few minutes of work into a few hours. These are color-coded and labeled for quick finding. It's healthy for the brain to be able to correlate colors with numbers, and after a few uses, they'll be engrained into your memory. They come in 1/4", 5/16" (8mm), 3/8", 7/16" (11mm) and 1/2", respectively. If the size you need is not mentioned in this list, that's okay - due to the twist design of these sockets, anything close to it will fit. Nonetheless, it's nice to have a set of the most common sizes. They come in a nice rubber mold so they don't get lost, and included is a complementary 3/8" drive which can hook up to any drill or impact driver, having a divit for quick-disconnect as well. The smell though, is wonderful, like burnt rubber; I'm not kidding!
Date de publication: 2017-11-25
Rated 5 de 5 de par Living in Florida rusted fasteners are a common problem. This tool is exactly what I needed to re... [This review was collected as part of a promotion.] Living in Florida rusted fasteners are a common problem. This tool is exactly what I needed to remove rusted bolt and hex screw heads. It's made with typical Milwaukee quality and has impact strength. It does have a specific use. It easily grabs, and extracts rusted hex screw heads on my pool enclosure and storage shed without damaging the surrounding surfaces. I like it!!
Date de publication: 2017-11-11
Rated 3 de 5 de par This set is typical of a 3/8 drive extractor set except that the 1/4, 5/16 (8mm), 3/8, 7/16 (11mm... [This review was collected as part of a promotion.] This set is typical of a 3/8 drive extractor set except that the 1/4, 5/16 (8mm), 3/8, 7/16 (11mm) and 1/2 inch sockets are color coded and marked with metric equivalents as listed. The sockets are in a plastic holder and include a 1/4 to 3/8 drive adapter though you could just use a 3/8 drive. The adapter has no place in the plastic holder. If using the closest matching socket you have trouble getting it over the bolt, like if it's covered with paint or whatever, just tap it down with a mallet. Once it's on spin the bolt off.
Date de publication: 2017-10-23
Rated 5 de 5 de par I took these to work to try them against a different brand that we are using and I like the Milwa... [This review was collected as part of a promotion.] I took these to work to try them against a different brand that we are using and I like the Milwaukee set a lot better. The sockets have a very precise design that really grabs the bolt that is stripped. I would have liked a better carrying case because they are not used as commonly as other tools, but you cannot bash them for the quality in the tool itself. I hope I get to enjoy them for years to come.
Date de publication: 2017-11-04
Rated 1 de 5 de par Absolutely terrible I love my Milwaukee tools, maybe a little more than I should but these are a huge let down. Ive never been so disappointed in a tool. Very, very, very upset with how poor these performed. Huge miss.
Date de publication: 2021-04-18
  • y_2024, m_6, d_21, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_20, tr_81
  • loc_fr_CA, sid_1001183824, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 52ms
  • REVIEWS, PRODUCT

What are the sizes? I need a 7mm.

Posée par: Davea0511
This kit will include a 5/16" / 8MM Extractorm a 3/8" Extractor, a 1/4" Extractor and a 1/2" Extractor.
Répondue par: Communityanswer
Date de publication: 2023-05-05

will there be a 9/16 avaible at any time?

Posée par: Duck
currently there are no plans for a 9/16 at this time
Répondue par: MilwaukeeElectric
Date de publication: 2023-05-05

do they work on metal to metal?

Posée par: Cookie
Yes they work on metal to metal quit well. 
Répondue par: Good To Go
Date de publication: 2023-05-07

Does this work on 14mm rounded bolt?

I have a 14mm rounded wheel bearing hub bolt. I wonder whether this set will work.
Posée par: Joseph
Hi Joseph- This socket set is ideal for common sized fasteners 1/4 in. to 1/2 in
Répondue par: Milwaukee Tool
Date de publication: 2023-05-07

do these work on round bolts?

Posée par: Anonyme
I don’t believe these would work for your application. . What you need is a screw extractor (EZ-Out). Drill an appropriate sized hole, and use the EZ-Out to extract the fubared screw. 
Répondue par: Hussar
Date de publication: 2023-05-07

Does it work for both directions?

Posée par: Kevin
HI Kevin - we recommend this accessory only extracting accessories, not for driving.
Répondue par: Milwaukee Tool
Date de publication: 2023-05-07

would this work on a stripped shower seat?

Posée par: Kels4
Hello! As long as you are putting this on a bolt or nut that it fits. The Milwaukee SHOCKWAVE Impact Duty Extractor Set is optimized geometry for secure grip on rusted or damaged fastener.
Répondue par: Milwaukee Tool
Date de publication: 2023-05-07

Will this set work on 12 mm bolts

Will this set work on 12 mm bolts
Posée par: Jer
Hello Jer, the SHOCKWAVE Impact-Duty Extractor Set is for common sized fasteners 1/4 in. to 1/2 in.
Répondue par: MilwaukeeElectric
Date de publication: 2023-05-06
  • y_2024, m_6, d_21, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_fr_CA, sid_1001183824, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT