Le Vendredi fou du printemps des Pros est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # 49-22-4800 Internet # 1000834379

Conçues avec une robuste tige hexagonale à changement rapide de 6mm (1/4po), les scies-cloches à paroi mince MilwaukeeMD Shockwave Impact DutyMC offrent aux professionnels une solution de perçage de trous à utiliser avec les clés à chocs. Dotées d'une conception à paroi mince et à 8DPP, les scies-cloches à paroi mince offrent une coupe sans bavure jusqu'à 40% plus rapide que les scies-cloches bimétalliques standard. Le ressort d'éjection automatique intégré élimine la frustration d'avoir à éjecter les débouchures manuellement. La conception à butée d'épaulement empêche de percer trop loin dans le matériau et de possiblement endommager des composants intérieurs des boîtes électriques et des boîtes de jonction. Choisissez les scies-cloches à paroi mince pour découper le plastique et les métaux de faible calibre jusqu'à 3mm (1/8po) d'épaisseur.

  1. Tige hexagonale à changement rapide de 6mm (1/4po) pour l'utilisation avec les visseuses à chocs
  1. La conception à paroi mince de 8DPP coupe 40% plus rapidement que les scies-cloches bimétalliques standard
  1. L'épaulement d'arrêt empêche les surperçages et l'endommagement des composants
  1. Ressort d'éjection repoussant automatiquement les débouchures
  1. Comprend: (1)scie-cloche à paroi mince Shockwave Impact 49-56-9810 de 7/8po, (1)scie-cloche à paroi mince Shockwave Impact 49-56-9820 de 1-1/8po, (1) scie-cloche à paroi mince Shockwave Impact 49-56-9830 de 1-3/8po .

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1.69
Hauteur de l’emballage (en pouces)
1.69
Largeur assemblée (en pouces)
6.46
Largeur de l’emballage (en pouces)
6.46
Poids assemblé (en livres)
0.45
Poids de l’emballage (en livres)
0.45
Profondeur assemblé (en pouces)
5.87
Profondeur de l’emballage (en pouces)
5.87

Détails

Arbre inclus
Article individuel, Ensemble
Ensemble
Caractéristiques des accessoires pour outils à moteur
Universel
Idéalement utilisé avec
Scies circulaires
Matériau de la mèche
Bimétal
Matériau de la pointe
Bimétal
Matériau utilisable
Plastique, Bois, Aluminium, Métal
Nombre de pièces dans l'ensemble
3
Pays d'origine
TW-Taiwan
Type d'accessoire pour outils à moteur
Scies-cloches et accessoires
Type de mèche
Scies-cloches
Type de tige
Hex
Utilisation
Tout usage

Garanties et certifications

Pour des informations, veuillez appeler le 1-877-948-2360.
Kit de scie cloche à paroi mince SHOCKWAVE (3 pièces)Milwaukee Tool Kit de scie cloche à paroi mince SHOCKWAVE (3 pièces)Conçues avec une robuste tige hexagonale à changement rapide de 6mm (1/4po), les scies-cloches à paroi mince MilwaukeeMD Shockwave Impact DutyMC offrent aux professionnels une solution de perçage de trous à utiliser avec les clés à chocs. Dotées d'une conception à paroi mince et à 8DPP, les scies-cloches à paroi mince offrent une coupe sans bavure jusqu'à 40% plus rapide que les scies-cloches bimétalliques standard. Le ressort d'éjection automatique intégré élimine la frustration d'avoir à éjecter les débouchures manuellement. La conception à butée d'épaulement empêche de percer trop loin dans le matériau et de possiblement endommager des composants intérieurs des boîtes électriques et des boîtes de jonction. Choisissez les scies-cloches à paroi mince pour découper le plastique et les métaux de faible calibre jusqu'à 3mm (1/8po) d'épaisseur.
Milwaukee Tool
1000834379
CAD63.422024-04-14
Home Depot Canada
Kit de scie cloche à paroi mince SHOCKWAVE (3 pièces) est évalué 3.6 de 5 de 265.
  • y_2024, m_4, d_13, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_57, tr_208
  • loc_fr_CA, sid_1000834379, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 69ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Junk When these first came out they were awesome and lasted probably hundreds of holes in mainly metal studs. Since the first set, I have tried them numerous times hoping for the same quality and they have all been junk. Straight out of the package almost all strip out the set screw on the first hole attempt. They hole saw metal is very soft at the base where the set screw is located. After trying to drill a hole and setting the screw a few times there aren't any threads left and the bit spins. Ad slogan for these should be "We put profit over quality". Returned my final set to HD for a refund yesterday and will look elsewhere for my hole cutting products.
Date de publication: 2021-08-24
Rated 2 de 5 de par Awesome hole-saws….. when they don’t break! These are the business when they don’t break! I used the 1 3/8” on a large breaker box and the hole saw kicked serious butt for about 5 holes. Then the little spring got jammed on the next go… wondering what the heck was stopping it from cutting through like the previous holes I noticed the jammed spring and the shank being loose. Tried to tighten but it did nothing. The other two sizes I’ve been using for two weeks and they are still going strong! Prolly cut over 50 holes with each!!!! Great product when they don’t break!!! 2 stars though due to the most important size breaking after 5 uses!
Date de publication: 2022-10-13
Rated 2 de 5 de par Great but...not really :-( These Milwaukee Shockwave thin hole saws are great, but.... The craftsmanship is straight garbage. Why? Because the shoulder stop and the 1/4 hex shank brakes apart. I brought a second set thinking it was me but that wasn't the case, the second set broke quickly and in the same location. Other Sparkies at work experience the same problem. We install solar electrical equipment and always drill into thin metals like Main Electrical Panels, subpanel, and 60 amp disconnects. Milwaukee please fix them someone could get hurt.
Date de publication: 2021-03-13
Rated 5 de 5 de par As an electrician, building/ mounting gears on conduits aren't always easy. If the conduits don... As an electrician, building/ mounting gears on conduits aren't always easy. If the conduits don't exactly follow the knockouts of said gear, we're resulted to make the knockouts ( using a hydraulic knockout set of course). Anyways, back to the product. Everyone's a fan of the carbide hole saws. Unfortunately with the preexisting K.O.s on the gear, they tend to strike the groove and take the k.o. punch with it. *These hole saws with the small gap teeth are perfect for these surfaces. * They'll create the hole needed for i.e. k.o. set, without tearing the preexisting k.o grooves. Smooth, does heat up ( don't touch), and keep a thin nail on hands to pop off the piece that ' at times' gets jammed in the hole saw. Definitely buying this when it calls for a replacement.
Date de publication: 2020-04-07
Rated 5 de 5 de par Great hole saw for light metal A couple years ago, I purchased just the middle one for a job where I had to make several holes that size for mounting controls in a metal box; I was very impressed at how quickly and cleanly it cut. After drilling a hole in a piece of 1/4" plexi, I could not get the slug out so I bought this whole set. I use them on a regular basis and love them. I frequently use the 7/8" one, which is the small one, to drill holes in the metal top cap of walls so that I can snap in the grommets (Greenlee 711M) to protect my cables. This is where I love the shoulder on these; should your chuck come lose, you will not loose your bit into the wall. I have also used this in my Milwaukee cordless screwdriver (M12, non-impact, though I believe you can use them in the impact tools), and still makes a clean, fast hole!
Date de publication: 2020-12-03
Rated 4 de 5 de par Sturdy hole saws [This review was collected as part of a promotion.] This set replaces one that used a single arbor and multiple blades. Unfortunately several blades broke during normal use, and the the arbor snapped. This set appears to be much more durable. The only drawback is that it has a shallow cutting depth. I will not be able to use it on thicker aluminum plate, although you can double the capacity by drilling from both sides. For thin sheet metal it is excellent, generating a very smooth hole with almost no filing needed to produces perfect hole.
Date de publication: 2014-09-24
Rated 1 de 5 de par Pilot bit absolutely useless. I've bought these multiple times because the saw portion is great, but the pilot bit is absolute trash. I really don't understand it, because your shockwave titanium drill bits are amazing. The factory pilot bits break on the very first hole almost every time, then I just stick the saw on one of the Shockwave titanium bits. You guys really need to step it up with these, as they do not match the usual Milwaukee standard of quality. Also, having a part number for the replacement pilot bit is useless if you cannot buy them anywhere.
Date de publication: 2023-09-11
Rated 4 de 5 de par I bought these with the intent to drill through stainless... I bought these with the intent to drill through stainless steel because it stated on the package that it would. Noticed that I might ruin the teeth on the bit if i pursued with drilling into stainless steel. However, I also used these on mild steel and it was amazing. Very fast and effortless with both Milwaukee cordless drill as well as cordless Milwaukee impact driver as intended as the package states. As an electrician, I found it very suitable for basic work but felt like it couldnt handle any thickness of stainless steel.
Date de publication: 2022-04-01
  • y_2024, m_4, d_13, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_57, tr_208
  • loc_fr_CA, sid_1000834379, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 49ms
  • REVIEWS, PRODUCT

Where can I get pilot bits

Posée par: Barstl
In the tool section.
Répondue par: Handyman
Date de publication: 2023-05-05

Does this work with the 3/8 in. Pistol Grip Drill Kit?

Posée par: CGC
Yes they do.
Répondue par: Handyman
Date de publication: 2023-05-05

hi just wanting to know where I can buy the pilot drill bits for these

hi just wanting to know where I can buy the pilot drill bits for these
Posée par: pistol
The pilot bits are not available for these hole saws.
Répondue par: MilwaukeeElectric
Date de publication: 2023-05-06

Are the pilots replacable?

Posée par: MrCool
Yes they are.
Répondue par: Handyman
Date de publication: 2023-05-05

will it cut light gage metal

will it cut light gage metal
Posée par: ole
Yes. I use these on all my metal J-boxes for 1/2", 3/4" & 1" conduit fittings. They work great in my impact.
Répondue par: Jason
Date de publication: 2023-05-06

Will this work on 16 gauge 304 SS? I'm looking to drill faucet holes in a sink

Will this work on 16 gauge 304 SS? I'm looking to drill faucet holes in a sink
Posée par: MIKE
Yes, although depending on the thickness of the metal, it might give you a hard time to remove from the hole saw. The gears I've drilled in have been around 13 gauge.
Répondue par: Abe
Date de publication: 2020-04-28

Is there a recommended cutting speed on each size to prewerve lofe of the teeth like greenlee's carbide hole cutter?

Posée par: Seblicar
Yes you need to cut the hole with a variable speed drill, use the slowest speed the drill will let you. This will give you a clean cut with less kick back.
Répondue par: Handyman
Date de publication: 2023-05-06

They will not let me add this to cart and purchase. They will only let me add to wish list. Please fix

Example: I have looked at the manual and can't figure out what I did wrong.
Posée par: Shepp
Hi Shepp, this item is currently in stock online. The Homedepot.com will allow you to place the order for whatever quantity is available at the time in the online inventory to ship to your location or to a Home Depot store, if eligible (check the product page for 'Not in Your Store - We'll Ship It There’). We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Répondue par: THDSupport
Date de publication: 2016-12-21
  • y_2024, m_4, d_13, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_fr_CA, sid_1000834379, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT