Magasinez les aubaines du Vendredi fou que vous ne voudrez pas manquer!  Magasiner les articles de l’événement

Milwaukee Tool M12 FUEL 12V Lithium-Ion sans fil et sans brosse 1/4 de pouce pour meuleuse droite (outil seulement)

Modèle nº 2486-20|Nº UGS 1001523864

Aperçu

Modèle # 2486-20 Internet # 1001523864

La meuleuse droite M12 FUEL 1/4 po de Milwaukee est conçue pour remplacer les meuleuses pneumatiques. Elle offre aux utilisateurs un rendement pouvant atteindre 0,3 HP, ce qui lui permet de surpasser de 20 % les meuleuses pneumatiques. La meuleuse à matrice en ligne M12 est dotée d'une commande de 4 modes de vitesse de rotation et d'une gâchette à vitesse variable sensible, offrant aux utilisateurs un contrôle inégalé avec leurs accessoires les plus courants. La meuleuse sans fil donne aux utilisateurs un meilleur accès et une plus grande mobilité, éliminant les frustrations des tuyaux et des compresseurs.

  1. Puissance du moteur 0,3 HP
  1. Contrôle de la vitesse de rotation à 4 modes
  1. Une plus grande mobilité et un meilleur accès
  1. Performance optimale avec les accessoires 2 pouces
  1. Comprend: (1) 2486-20-M12 Meuleuse droite 1/4 pouce FUEL (batterie et chargeur vendus séparément)

Spécifications

Dimensions

Hauteur assemblé (en pouces)
10.1
Hauteur de l’emballage (en pouces)
11.22
Largeur assemblée (en pouces)
1.9
Largeur de l’emballage (en pouces)
3.39
Poids assemblé (en livres)
1.2
Poids de l’emballage (en livres)
1.74
Profondeur assemblé (en pouces)
2.2
Profondeur de l’emballage (en pouces)
3.39

Détails

Ampères-heures de la batterie
0
Ampérage
0
De batterie inclus
Non
Moteur
Moteur sans balais
Nombre de piles comprises
0
Nombre de vitesse
4
Pays d'origine
CN-China
Sans fil/avec fil
Sans fil
Tension (en volts)
12
Type d'outil à moteur
Meules à rectifier les matrices
Type de pile, de batterie ou dalimentation
Lithium-ion
Vitesse variable

Garanties et certifications

Garantie limitée de 5 ans. Pour de plus amples informations, veuillez appeler le 1-877-948-2360.
M12 FUEL 12V Lithium-Ion sans fil et sans brosse 1/4 de pouce pour meuleuse droite (outil seulement)Milwaukee Tool M12 FUEL 12V Lithium-Ion sans fil et sans brosse 1/4 de pouce pour meuleuse droite (outil seulement)La meuleuse droite M12 FUEL 1/4 po de Milwaukee est conçue pour remplacer les meuleuses pneumatiques. Elle offre aux utilisateurs un rendement pouvant atteindre 0,3 HP, ce qui lui permet de surpasser de 20 % les meuleuses pneumatiques. La meuleuse à matrice en ligne M12 est dotée d'une commande de 4 modes de vitesse de rotation et d'une gâchette à vitesse variable sensible, offrant aux utilisateurs un contrôle inégalé avec leurs accessoires les plus courants. La meuleuse sans fil donne aux utilisateurs un meilleur accès et une plus grande mobilité, éliminant les frustrations des tuyaux et des compresseurs.
Milwaukee Tool
1001523864
CAD2482022-11-27
Home Depot Canada
M12 FUEL 12V Lithium-Ion sans fil et sans brosse 1/4 de pouce pour meuleuse droite (outil seulement) est évalué 4.3 de 5 de 165.
  • y_2022, m_11, d_26, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_21, tr_144
  • loc_fr_CA, sid_1001523864, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 73ms
  • REVIEWS, PRODUCT
Rated 3 de 5 de par Yes, but... need tools to tighten collet and not variable speed In researching so many offering by so many brands it is often difficult to get all the detail one needs to make an informed purchase. That was the case here for me. This tool is good, but... there is no shaft lock so not only do you need a wrench to tighten the collet, you need TWO wrenches, 1/2" and 11/16". They are provided but note they are never shown in the pictures. Second, the multi speed is NOT trigger controlled variable speed. It is a separate selector. Not the best for having full power and control like if it were variable. Oh, well... I guess these details might be buried in other reviews but I thought I'd post them for others to see.
Date de publication: 2020-07-10
Rated 1 de 5 de par super janky the issue with these die grinders is that they made the battery compartment modular and the business end the variable. so the right angle die grinder and straight Die Grinder share the same battery housing. its not a 1 piece design like the drills or impacts are. this is a design flaw that happened as a result of milwaukee trying to save money, and the tool has a significant amount of flex at the joint when you are trying to make the tool cut in to anything. I bought 3 of them and they were all the same. I was unhappy wbough to make a return. the 90 degree grinders are more tolerable. I kept all 3 of those that I bought.
Date de publication: 2022-04-24
Rated 2 de 5 de par Not yet I bought this tool mostly to use with rotary files/carbide de-burring bits and it seemed to work fine with those. Yesterday I put a polishing wheel in it to clean up some aluminum and it would run for about 10 seconds and stop. It did that repeatedly, even with different batteries. If I remove the wheel it seems to run continually under no load. I hope Milwaukee has a simple solution to this problem, otherwise the tool is seriously failing in performance. It turns out I have numerous other Milwaukee tools, both 12v and 18v and am pleased with all of them.
Date de publication: 2020-12-28
Rated 2 de 5 de par I am a professional. I have a large array of... I am a professional. I have a large array of Milwaukee tools. I am very pleased with most of them. Recently, I purchased the M12 die grinder, Unfortunately, I do not like this tool. The bits are difficult to insert and remove. Something so simple takes 5-minutes to insert, 5-minutes to remove. It’s so frustrating, and I usually have use several pliers to remove the bits. I hate the safety on the trigger. A bad design, The battery should go in, and out easily. Not mine. Another hassle. Once you get past all that, it does it’s job. I would to see it spin faster.
Date de publication: 2022-04-02
Rated 4 de 5 de par Works good but needs work I bought this about 4 months ago and it worked really good. But as soon as I put on a flapper wheel it shuts off as soon as i start. It also shuts off when i have chatter with a carbide bit. As soon as you put just a little bit to much pressure on it shuts off. It is a good tool all and all but needs a little bit of work.
Date de publication: 2021-01-21
Rated 4 de 5 de par Great with limits As far as tools go this M12 die grinder was great. Small size and very powerful but I did eat through a lot of batteries. So many batteries that I thought I was using a defective tool. After talking to my brother about it he told me they are 12 volt batteries you know not to try to compare them with the 18 volt. So I give this tool 4 stars cause it ate through batteries and because twice it just stopped all together. Think because it may have overheated. Excellent tool but if you do a lot of grinding I would go with the larger batteries.
Date de publication: 2022-02-01
Rated 4 de 5 de par FAST and versatile Very deceiving tool, so quiet you can’t tell what rpm it’s running compared to air tools. The tool is a little bulky but still smaller than the full size and always the best perk is it’s cordless versatility. I also recommend with a four amp hour battery.
Date de publication: 2022-02-10
Rated 5 de 5 de par Excellent Tool Hi, I am very pleased with the purchase of this tool. I like the weight of the tool and the feel of it. I have used it a number of times with burr bits and also with a mandrel for small cutting discs, I haven't been disappointed yet.
Date de publication: 2022-02-07
  • y_2022, m_11, d_26, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_21, tr_144
  • loc_fr_CA, sid_1001523864, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 50ms
  • REVIEWS, PRODUCT

How does this compare to the m12 1/8 rotary tool? i like the idea of the straight die grinder, bu...

How does this compare to the m12 1/8 rotary tool? i like the idea of the straight die grinder, but does it offer any advantage over the rotary tool other than a larger arbor?
Posée par: Beep
Lots more power, I have the rotary tool also. This die grinder is meant for much heavier duty jobs i.e Fabricating, metal shaping, grinding of heavy steel.
Répondue par: Beezle
Date de publication: 2022-07-22

Is a 1/4" to 1/8" collet adapter or 1/8" collet included. If not included, is a 1/8" collet avai...

Is a 1/4" to 1/8" collet adapter or 1/8" collet included. If not included, is a 1/8" collet available.
Posée par: MrJeff
I think they do - https://www.homedepot.com/p/Milwaukee-1-8-in-Collet-Accessory-48-66-2486/313420816
Répondue par: SandyG
Date de publication: 2022-07-22

Will it come with a guard to use with cutting wheels

Posée par: Chatomendez
No, it doesn't come with a guard to use with cutting wheels.
Répondue par: Communityanswer
Date de publication: 2022-07-22

what is a good Mounting Mandrel for M12 FUEL 12-Volt Lithium-Ion Brushless Cordless 1/4 in. Stra...

what is a good Mounting Mandrel for M12 FUEL 12-Volt Lithium-Ion Brushless Cordless 1/4 in. Straight Die Grinder ? I have heard a lot of the 1/4" Shaft do not fit well .
Posée par: Matthew
1/4" shank fits but cannot get of tool. Not a great design
Répondue par: Robert camacho
Date de publication: 2022-07-22

Does Milwaukee sell drill bit sets and screwdriver sets for this tool?

I want something more heavy duty compared to my current Dremel 4000.
Posée par: Christian
Hi Christian! Our M12 FUEL™ 1/4" Straight Die Grinder is optimized for most common 2” accessories.
Répondue par: MilwaukeeElectric
Date de publication: 2022-07-22

Can we get a rubber boot for this?

Can we get a rubber boot for this?
Posée par: Mark
Hi Mark! We currently do not have a protective boot for our straight die grinder. However, one is available for our right angle die grinder. Check out product 49-16-2485.
Répondue par: Milwaukee Tool
Date de publication: 2022-07-22

Does tool only come with the two wrenches to remove disk?

Posée par: Sanchv
Hello! Our M12 FUEL 12-Volt Lithium-Ion Brushless Cordless 1/4 in. Straight Die Grinder comes with two Open End Wrenches, sizes 1/2" and 11/16".
Répondue par: MilwaukeeElectric
Date de publication: 2022-07-22

Can this be used as a drywall cutout tool?

Can this be used as a drywall cutout tool?
Posée par: DIY87
Hi Aaron! Our M12 FUEL 12-Volt Lithium-Ion Brushless Cordless 1/4 in. Straight Die Grinder (2486-20) is intended for metal grinding applications. We suggest checking out our M18™ Cut Out Tool (2627-20).
Répondue par: Milwaukee Tool
Date de publication: 2022-07-22
  • y_2022, m_11, d_25, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_fr_CA, sid_1001523864, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 76ms
  • QUESTIONS, PRODUCT