L’événement On se met à l’oeuvre est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # 2235-20 Internet # 1000690904

Testeur dintensité électrique RMS pour service intensif à lintention des applications professionnelles résidentielles, commerciales et industrielles. Outil parfait pour l'électricien professionnel; comprend toutes les caractéristiques nécessaires pour accomplir le travail sur le terrain, sur le chantier ou à l'usine. Caractéristiques de la pince ampèremétrique 2235-20 de Milwaukee : mâchoire de 1 po permettant de mesurer un câble pouvant atteindre 350 MCM; classe III 600 V; mesure d'intensité jusqu'à 400 A c.a.; mesure de la tension jusqu'à 600 V c.a/c.c; lampe à DEL améliorant léclairage; mesure de la résistance jusquà 4000 ohms; tests de continuité; afficheur noir sur blanc à rétroéclairage facile à lire; poignée robuste surmoulée pour une durabilité et une prise accrues; comprend 1 ensemble de fils dessai, 2 piles AA et guide dutilisation; garantie de 5 ans. Rien de moins quun SERVICE INTENSIF.

  1. Mesure de tension jusqu'à 400 A c.a/c.c. large mâchoire de 1 po
  1. Mâchoire mince facilitant les mesures dans les panneaux ou les faisceaux.
  1. Large gamme dintensités allant jusquà 600 V c.a/c.c.
  1. Mesure RMS précise pour toutes les applications
  1. Lampe de travail à DEL intégrée
  1. Classe III (600 V) pour une sécurité accrue

Spécifications

Dimensions

Hauteur assemblé (en pouces)
2
Hauteur de l’emballage (en pouces)
2
Largeur assemblée (en pouces)
10.8
Largeur de l’emballage (en pouces)
10.8
Poids assemblé (en livres)
1.3
Poids de l’emballage (en livres)
1.3
Profondeur assemblé (en pouces)
5.9
Profondeur de l’emballage (en pouces)
5.9

Détails

Article individuel, Ensemble
Article individuel
Caractéristiques
Sélection automatique de gamme, Alerte sonore, Accumulateur au plomb, Affichage rétroéclairé, Mémorisation des données
Certifié
Cote de sécurité
CAT III
Courant continu maximal (en A)
400
Fonction de testeur
Intensité de courant électrique
Pays d'origine
CN-China
Source dalimentation
À piles
Tension alternative maximale (en V)
600V
Tension alternative maximale (en V)
600
Tension continue maximale (en V)
600V
Tension continue maximale (en V)
600
Type d'appareil numérique
Numérique
Type de batterie
Batterie remplaçable
Type de testeur
Électropinces

Garanties et certifications

Garantie de 5 ans, pour obtenir de plus amples renseignements sur la garantie, composer 1 800 SAWDUST.
Pince Ampèremétrique Milwaukee De 400 AmpMilwaukee Tool Pince Ampèremétrique Milwaukee De 400 AmpTesteur dintensité électrique RMS pour service intensif à lintention des applications professionnelles résidentielles, commerciales et industrielles. Outil parfait pour l'électricien professionnel; comprend toutes les caractéristiques nécessaires pour accomplir le travail sur le terrain, sur le chantier ou à l'usine. Caractéristiques de la pince ampèremétrique 2235-20 de Milwaukee : mâchoire de 1 po permettant de mesurer un câble pouvant atteindre 350 MCM; classe III 600 V; mesure d'intensité jusqu'à 400 A c.a.; mesure de la tension jusqu'à 600 V c.a/c.c; lampe à DEL améliorant léclairage; mesure de la résistance jusquà 4000 ohms; tests de continuité; afficheur noir sur blanc à rétroéclairage facile à lire; poignée robuste surmoulée pour une durabilité et une prise accrues; comprend 1 ensemble de fils dessai, 2 piles AA et guide dutilisation; garantie de 5 ans. Rien de moins quun SERVICE INTENSIF.
Milwaukee Tool
1000690904
CAD1582024-05-27
Home Depot Canada
Pince Ampèremétrique Milwaukee De 400 Amp est évalué 4.5 de 5 de 49.
  • y_2024, m_5, d_26, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_39
  • loc_fr_CA, sid_1000690904, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 111ms
  • REVIEWS, PRODUCT
Rated 2 de 5 de par not recommend for skilled trades. very impress the build of this meter. rugged. small. led light.backlight. five year warranty trms meter. except for one thing. the ohm reading. I am a hvac/r tech. check a pump winding. zero ohm reading. i make sure connection is tight and has good connection. still zero ohm reading. so must be a open winding. took it out and hooked power to it. the pump works! look like this meter does not read low ohm. milwaukee makes another same meter with lo-ohm reading feature but its not a clamp on. i will be returning this unit. will be getting a fluke. really love this meter.
Date de publication: 2011-12-20
Rated 5 de 5 de par Easy to use and professional grade I got the opportunity to use this for diagnosing the battery charge and starter draw on a car I am restoring . The meter worked flawlessly and I found it wasy to read. My friend is an electrician and I asked him to check it out and his feedback was that it was just as good as his fluke meter and cost a few bucks less. One drawback is that there is no case included and i can't find out which one will fit it correclty without trial and error. I also used this to check some of the circuits in my home and found it very easy to use.
Date de publication: 2013-07-20
Rated 5 de 5 de par Electricians Friend Fits nicely on tool belt. So light you forget it's even there. Great for residential, and normal commercial work. Tough enough to withstand drops from the second floor.
Date de publication: 2016-11-07
Rated 5 de 5 de par Great for diagostics As a homeowner I can't say that this is a tool that use to often, but it does come in handy. I have used this to figure out how much power my pool uses and what is costs to operate. Its also handy for figure out is something that draws power is tripping a breaker because of a bad breaker, something going on with the piece of equipment or just using too small of wiring. This unit is also pretty accurate, I compared it to more expensive equipment I have at work and it was always with a couple of percent of the same readings. The response is a little slower, but other than trying to find the inrush current on a motor starting up i can't think of a time where this would be needed.
Date de publication: 2013-07-31
Rated 4 de 5 de par Very good but would be better if a hanging kit was available Had to make a holder stand for those moments were you need a third hand to hold the meter
Date de publication: 2017-03-11
Rated 2 de 5 de par Pretty good for the price point I'm a maintenance engineer for a large production plant and in charge of all tool purchases, this is not the first time i've purchased or used an amp probe multimeter. milwaukee has really stepped up their game and diversified their market. they are not just power tools anymore. i would normally buy the brand that is synonymous with electrical tools but thought i'd give milwaukee a shot this time. it's not a bad tool for the price point, but i really wish i would have spent another twenty and gotten the brand i've been using for years. the probes have to be disconnected to use the amp clamp, but the unit doesn't come with a case, a cord wrap, or anything so i'm sure these leads are going to get left somewhere when i'm using the amperage feature. yeah, it's got an LED worklight, but nowadays what doesn't have a small LED? backlit screen, not really a selling point, if i'm somewhere that dark, i usually have work lamps. the body of the meter doesn't even have a holder for one of the leads so you can poke around and read the meter at the same time, and it hasn't got a magnet either... which is offered by their leading competitor in units half this price. so all in all, i'm going to give it a try, the amp probe seems a little buggy in it's readings when i can get one. this will probably get returned in exchange for the leading brand. good try milwaukee, you're close but you need a little refinement.
Date de publication: 2013-12-11
Rated 1 de 5 de par This meter's off dial doesn't really turn it off. I thought it was just a coincidence the first ... This meter's off dial doesn't really turn it off. I thought it was just a coincidence the first 2 times I took my meter out of my bag to find the batteries were dead. Turns out it isn't a coincidence. With the function knob set to off, if any of the buttons are pressed the meter will pull 7ma off your batteries, which is the same as if it were running. I have also been able to get it to draw 200ma with the mode knob in off by pushing the backlight button, and the screen and backlight are actually off. I think I'm going to install a switch on the back, which actually disconnects the batteries when I turn it off, or maybe put some capton tape over the rotary switch's off contacts. The other functions have tested all seem to work, but aren't of much use with a dead battery.
Date de publication: 2016-11-04
Rated 5 de 5 de par Great product! This is just what I needed! I have always wanted one of these but just never bought one, was always borrowing my brothers. No sooner did I get this and I had two issues I needed to check. My remote pool control panel stopped working and a breaker went bad in my kitchen. I was able to quickly figure out the problem was not the pool panel but just a wire had come loose. Saved me loads of money hiring an electrician or replacing the panel! Easy to use even for me...I am challenged when it comes to tools...lol
Date de publication: 2013-07-10
  • y_2024, m_5, d_26, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_39
  • loc_fr_CA, sid_1000690904, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 48ms
  • REVIEWS, PRODUCT

Does it check temperature and come with a thermocouple?

Does it check temperature and come with a thermocouple?
Posée par: Hvacguy
No, it does not.
Répondue par: Handyman
Date de publication: 2024-01-23

Are you positive that this meter comes with a case?

I only ask this because ive read two seperate comments stating that it does come with a case and the other comment stating that this meter is great but would be better if it had a case that it came with. So if someone could clarify this i would greatly appreciate it
Posée par: Steve
this does not come with a case, we offer a soft case #48-55-0175 that can be purchased separately
Répondue par: MilwaukeeElectric
Date de publication: 2023-05-05

Does the product come with the test lead set

Posée par: Jose
Hi Jose, this includes one (1) electrical test lead set, two (2) AAA batteries and manual. - Milwaukee Tool Social Team
Répondue par: Milwaukee Tool
Date de publication: 2024-02-23

Are there alligator clips for this model?

Are there alligator clips for this model?
Posée par: Terry
Yes the clips are included.
Répondue par: MilwaukeeElectric
Date de publication: 2023-05-04

Does this meter read microfarads?

Posée par: Jake
It measures up to 400 amps AC, Large 1.0” jaw opening. - Milwaukee Tool, Social Team
Répondue par: Milwaukee Tool
Date de publication: 2024-04-09

Does this one have the feature where it beeps?

Posée par: Mitch
The 400 Amp Clamp Meter does not beep. - Milwaukee Tool, Social Team
Répondue par: Milwaukee Tool
Date de publication: 2023-10-23

Does the meter have a m f d setting

Posée par: Ismael
It can determine a voltage range up to 600-volt AC/DC. Thank you! - Social Team
Répondue par: Milwaukee Tool
Date de publication: 2024-04-17

how can you measure capacitance with this meter?

Posée par: Handyman
It can't I believe the product description is incorrect. "Capacitance to 4000 µF" should be "Resistance to 4000 Ω"
Répondue par: BilltheEngineer
Date de publication: 2023-05-04
  • y_2024, m_5, d_26, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_fr_CA, sid_1000690904, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 79ms
  • QUESTIONS, PRODUCT