NOBODY BEATS OUR PRICES GUARANTEED.Terms & Conditions

Milwaukee Tool Scie-cloche de 5-3/8 po pour pose de lumière encastrée

Modèle nº 49-56-0303|Nº UGS 1000686580

Aperçu

Modèle # 49-56-0303 Internet # 1000686580

Les scies-cloches pour luminaire encastré de MilwaukeeMD comportent des pointes au carbure idéales pour la coupe de cloisons sèches, de plâtre, de carreaux insonorisants, de bois et de stucco avec treillis. Dotées d'arêtes lisses, ces scies n'endommageron

  1. Arêtes lisses pour des coupes nettes. Pointes au carbure pour matériaux abrasifs.
  1. Construction soudée robuste propice à des perforations de dimensions appropriées
  1. Dos ouvert facilitant le retrait des pièces coupées
  1. Pour installer des luminaires encastrés exigeant un trou de 5 3/8 po
  1. Pour installation de luminaires encastrés de 3 po nécessitant un trou de 5 3/8 po.
  1. Comprend (1) scie cloche légère encastrée de 5 3/8 pouces et (1) foret pilote en acier à haute vitesse

Spécifications

Dimensions

Hauteur assemblé
7.5
Hauteur de l’emballage (en pouces)
10.63
Largeur assemblée
1.5
Largeur de l’emballage (en pouces)
7.68
Poids assemblé
10.25
Poids de l’emballage (en livres)
1.15
Profondeur assemblé
1.15
Profondeur de l’emballage (en pouces)
1.57

Détails

Arbre inclus
Oui
Article individuel, Ensemble
Article individuel
Certifié
Oui
Diamètre de la mèche (en po)
5
Embout pilote inclus
Oui
Longueur de la mèche (en po)
1-5/8
Matériau de la mèche
Nettoyage manuel
Matériau de la pointe
Goupille fendue
Nombre de pièces dans l'ensemble
1
Pays d'origine
TW-Taiwan
Sans fil/avec fil
Sans fil

Garanties et certifications

Tel #: 1-800-628-0525
Scie-cloche de 5-3/8 po pour pose de lumière encastréeMilwaukee Tool Scie-cloche de 5-3/8 po pour pose de lumière encastréeLes scies-cloches pour luminaire encastré de MilwaukeeMD comportent des pointes au carbure idéales pour la coupe de cloisons sèches, de plâtre, de carreaux insonorisants, de bois et de stucco avec treillis. Dotées d'arêtes lisses, ces scies n'endommageron
Milwaukee Tool
1000686580
Scie-cloche de 5-3/8 po pour pose de lumière encastrée est évalué 4.3 de 5 de 30.
  • y_2020, m_9, d_27, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_fr_CA, sid_1000686580, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 172ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Cut a hole in garage to install a exhaust fan... Cut a hole in garage to install a exhaust fan worked perfect on stucco
Date de publication: 2020-08-15
Rated 5 de 5 de par Works on exterior 3/4" stucco wall with wire mesh I wanted to vent a portable AC out in a windowless garage but had to cut through a stucco wall that was 3/4" thick with wire mesh. This carbide hole saw cut through the wall with ease and took about 60 seconds. The cut was very smooth and clean. It was also the perfect size opening for the Speedi-Product 5" round galvanized wall vent with spring return damper. This wall vent was also perfectly sized for my PAC wall vent. So if you need to cut a 5 3/8" hole in a stucco wall - you need this hole saw.
Date de publication: 2020-08-09
Rated 5 de 5 de par Yes, it cut through stucco on one the outside and... Yes, it cut through stucco on one the outside and dry wall on the inside with no problem at all.
Date de publication: 2020-08-04
Rated 5 de 5 de par Great for lathe and plaster.... Great for lathe and plaster.
Date de publication: 2020-07-30
Rated 5 de 5 de par Easy to use , cut through wood door to install... Easy to use , cut through wood door to install A/C vent hose
Date de publication: 2020-05-30
Rated 5 de 5 de par I think it will work great on sheetrock and fiberglass. I thought I was going to be drilling thr... I think it will work great on sheetrock and fiberglass. I thought I was going to be drilling through fiberglass in my boat but turns out it was actually 3/16" aluminum covered by carpet. The bits made it through for the two speaker holes I needed but most of the carbide grit was worn off and I trashed the bit. Looks like there are also teeth under the carbide so I may get more use out of it. It's a quality heavy duty bit for what is intended for.
Date de publication: 2020-03-31
Rated 5 de 5 de par love it love it
Date de publication: 2020-03-31
Rated 1 de 5 de par Not good quality at all. Was hoping this would work... Not good quality at all. Was hoping this would work well with plaster and lath ceiling and it didn’t work well. I ended up using it as a template and having to score the plaster with a flat head screw driver first. Wouldn’t get through the lath either. Not as good as other brands.
Date de publication: 2019-07-09
  • y_2020, m_9, d_27, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_fr_CA, sid_1000686580, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 25ms
  • REVIEWS, PRODUCT

I was thinking about cutting through two pieces of plywood or particle board that car clamped together. How thick can this saw cut through at once?

Posée par: JD K
Hi JD K, My suggestion is that you cut your material one at a time. If you must cut the material together, that max would be 1.25"
Répondue par: Milwaukee Tool Canada
Date de publication: 2018-04-04
  • y_2020, m_9, d_27, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_1000686580, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 104ms
  • QUESTIONS, PRODUCT