La propreté et la sécurité de nos magasins est l'une de nos principales priorités.  En savoir plus

Milwaukee Tool Tournevis à cliquet 10-en-1 à embouts multiples à tête carrée

Modèle nº 48-22-2322C|Nº UGS 1001024502

Aperçu

Modèle # 48-22-2322C Internet # 1001024502

Le tournevis à cliquet 10-en-1 polyvalent à embouts multiples Milwaukee (modèle no 48-22-2302) est muni d'une clé à douille à cliquet entièrement métallique durable et d'un rangement intégré des embouts dans la poignée. Les embouts de 3 1/2 po sont dotés de la technologie Power Groove pour une compatibilité accrue avec les outils à moteur. Le tournevis comprend les 7 embouts suivants : (1) cruciforme no 1, (1) cruciforme no 2, (1) carré no 1, (1) carré no 2, (1) carré no 3, (1) plat 1/4 po, et (1) plat 3/16 po. Tous les tournevis 10-en-1 à embouts multiples Milwaukee offrent une commodité et une polyvalence optimales sur le chantier.

  1. Cliquet entièrement métallique à couple élevé offrant une durabilité accrue et une vitesse de vissage 2fois plus rapide
  1. Embouts rainurés de 3 1/2po compatibles avec les outils électriques
  1. Rangement et sélection de type «revolver» pour les embouts
  1. Boucleur et dénudeur de fils allant jusqu'à un calibre de 10 pour une fonctionnalité accrue sur le chantier
  1. Embouts chromés protection de qualité marine contre la rouille
  1. Maintien aimanté des embouts permettant un rendement de vissage uniforme

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1.5
Hauteur de l’emballage (en pouces)
9.15
Largeur assemblée (en pouces)
1.5
Largeur de l’emballage (en pouces)
6.75
Poids assemblé (en livres)
0.6
Poids de l’emballage (en livres)
1.14
Profondeur assemblé (en pouces)
9
Profondeur de l’emballage (en pouces)
1.8

Détails

Longueur hors tout (en po)
6
Nombre de pièces dans l'ensemble
1
Pays d'origine
CN-China
Taille de la prise (en po)
Multiple

Garanties et certifications

Tous les outils à main MILWAUKEE sont garantis à l'acheteur initial seulement contre les défauts de matériel et de fabrication. Sous réserve de certaines exceptions, MILWAUKEE s'engage à réparer ou à remplacer tout outil à main qui, après vérification, est reconnu par MILWAUKEE comme présentant des vices de matériaux et de fabrication pour toute la durée de vie utile de l'outil. Il incombe à l'utilisateur de retourner l'outil à main à un Centre de service MILWAUKEE, port prépayé et assuré. Une copie de la preuve d'achat doit être jointe au produit retourné. Cette garantie ne s'applique pas aux dommages que MILWAUKEE estime avoir été causés par un mauvais usage, des modifications, un usage excessif, une usure normale, un manque d'entretien ou des accidents.
Tournevis à cliquet 10-en-1 à embouts multiples à tête carréeMilwaukee Tool Tournevis à cliquet 10-en-1 à embouts multiples à tête carréeLe tournevis à cliquet 10-en-1 polyvalent à embouts multiples Milwaukee (modèle no 48-22-2302) est muni d'une clé à douille à cliquet entièrement métallique durable et d'un rangement intégré des embouts dans la poignée. Les embouts de 3 1/2 po sont dotés de la technologie Power Groove pour une compatibilité accrue avec les outils à moteur. Le tournevis comprend les 7 embouts suivants : (1) cruciforme no 1, (1) cruciforme no 2, (1) carré no 1, (1) carré no 2, (1) carré no 3, (1) plat 1/4 po, et (1) plat 3/16 po. Tous les tournevis 10-en-1 à embouts multiples Milwaukee offrent une commodité et une polyvalence optimales sur le chantier.
Milwaukee Tool
1001024502
CAD29.98
Home Depot Canada
Tournevis à cliquet 10-en-1 à embouts multiples à tête carrée est évalué 4.6 de 5 de 271.
  • y_2021, m_9, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_269
  • loc_fr_CA, sid_1001024502, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 84ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Well worth the investment, especially when on sale. Having other Milwaukee screwdrivers, wasn't sure about picking up this ratcheting model - 5 minutes using it made me realize I shouldn't have hesitated. Stubby is great for tight spaces & quality is exceptional. A little silicone in the bit holders and they're fairly smooth and easy to push in and out, unlike the mega bit cases. If you're hesitating, for the $15, well worth the investment, especially with Milwaukee's lifetime warranty.
Date de publication: 2021-09-08
Rated 5 de 5 de par 2 for 1 I have numerous screwdrivers, but no Stubby Ratchetting. Saw this combo on Sale, but was apprehensive, because I have a Milwaukee 11-in-1 Non-Ratcheting, and the tips fall out all the time. So bad, I do not use it if I am working in an area, where if dropped, I can not find quickly (e.g. lawn). So far, these work great. The ratchet is tight and easy to change directions. If it lasts a few years, it will be worth it.
Date de publication: 2021-08-11
Rated 3 de 5 de par Love the driver but... I love this driver and is my favorite multi driver to use at work but the area where the ratchet meets the handle is very loose and I'm thinking will fall apart eventually. I've only had the driver for about a year.
Date de publication: 2021-03-13
Rated 3 de 5 de par Missing key drivers - bit and socket adapter This thing is fine. I use mine about 50% of the time as I have others that work well too. You can get all these driver bits in sets also and I outfit mine with a locking bit holder loaded so I can switch if needed or extend if needed. But what it really needs is a 1/4 inch socket adapter. There is no other tool like this with one available and finding one that is 3 1/2 to 4 inches long is near impossible. I would recommend that Milwaukee put a socket adapter with this kit so that it is loaded but then if switching bits could be placed in the handle with only the 1/4 Square Drive sticking out a little bit or build in a singular hole recess for it. Some may ask what will it replace? Anything that is used less- One of the SQ? - you can get those anywhere and if you have a locking bit driver you’ll probably use that anyway when it comes in the pack of screws.
Date de publication: 2021-01-01
Rated 2 de 5 de par I don’t think I would buy this again It says that it’s magnetic; I can’t tell. The bits are difficult to get out of the handle. The bits seems cheap; I’ve already broke the lil flathead after the first week. The bit being used will fall out of the driver. I wish the driver had A locking mechanism to keep the bit in so you can have the most used ready to go and only change when needed.
Date de publication: 2020-05-20
Rated 4 de 5 de par Well built tool. However, I wish it had magnetized bits.... Well built tool. However, I wish it had magnetized bits.
Date de publication: 2019-02-12
Rated 5 de 5 de par Best rachetting screw driver I own. It is comfortable... Best rachetting screw driver I own. It is comfortable in my hand and holds all the bits I use. Great purchase.
Date de publication: 2019-02-12
Rated 5 de 5 de par 5 Star Review Rating provided by a verified purchaser
Date de publication: 2019-02-07
  • y_2021, m_9, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_269
  • loc_fr_CA, sid_1001024502, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 66ms
  • REVIEWS, PRODUCT

How is this screwdriver different than Model # 48-22-2322? They both seem to include the same bits.

Posée par: Imran S
Hi Imran - The difference between the two is that the 10-in-1 (48-22-2302) has a built in wire stripper attached to the handle
Répondue par: Milwaukee Tool
Date de publication: 2020-10-29

delivery

hello, is it possible to send the milwaukee screwdriver to germany and how much would the shipment be. best regards jürgen schickmann
Posée par: 0nyx
I bought mine in the store. You might get with Customer Service with this question.
Répondue par: MSum
Date de publication: 2019-01-16

Can this be used as a regular rigid driver as well as a racheting driver? Thanks.

Can this be used as a regular rigid driver as well as a racheting driver? Thanks.
Posée par: Tommy
yes definitely.
Répondue par: JohnM
Date de publication: 2019-01-15

Bit Removal

Is there a "trick" to get the bits out of the handle easier?I have to pry mine out by using the current bit as wedge to push it out.I've had my driver for 4 months now and the "breaking in" period has taken longer than expected.I work in low voltage and use the driver 5 days a week.
Posée par: Han
I use the other bit as well. It’s become easier over the last year.
Répondue par: Jo
Date de publication: 2019-03-16

Are their torx replacement bits I can buy and use instead of the square bits ?

Are their torx replacement bits I can buy and use instead of the square bits ?
Posée par: Please
Yes, you just need to order bits long enough to fit the carrier handle if you want them to replace the included bits exactly. The handle will however hold ant 1/4” hex based bit
Répondue par: Anonyme
Date de publication: 2018-11-15

How is the bit play? I have one now that goes deeper than usual which makes the bit rock solid wi...

How is the bit play? I have one now that goes deeper than usual which makes the bit rock solid with no play/wobbling. Wondering how this one is.
Posée par: M12
There is very little play in it.
Répondue par: HomeDepotCustomer
Date de publication: 2018-11-21

Are the bits magnetized when in use?

Are the bits magnetized when in use?
Posée par: Note4u
No
Répondue par: BLKHAWK1980
Date de publication: 2018-02-14

I have lost a couple of bits and would love to replace them (as this IS a very useful tool). Is t...

I have lost a couple of bits and would love to replace them (as this IS a very useful tool). Is there anywhere that I can buy more bits? Specifically the Phillip's bits.
Posée par: Buckeyefan
No not by Milwaukee. Atleast not that will look exactly like what you got. Milwaukee does sell impact #1 and #2 bits that should fit no problem. Just keep in mind that these bits will be black oxides with a red collar that says Milwaukee on them.
Répondue par: ManOfSteel
Date de publication: 2018-01-11
  • y_2021, m_9, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_fr_CA, sid_1001024502, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 106ms
  • QUESTIONS, PRODUCT