L’événement On se met à l’oeuvre est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # 2570 Internet # 1000691629

Changer le style de votre salle de bains n'aura jamais été aussi facile et rapide. Le système de soupape commune M-PACT vous permet de remplacer la garniture ou les finis de vos accessoires sans changer les soupapes. Une fois le système installé, vous pouvez changer votre décor aussi souvent que vous le souhaitez à n'importe quel moment durant vos travaux de construction ou des années plus tard. Il ne vous faudra que quelques minutes. Et le meilleur dans tout cela? L'installation du système de soupape commune est tout aussi facile que celle d'une soupape standard.

  1. Conception en laiton
  1. Soupape d'équilibrage de pression Posi-Temp empêchant les suppressions d'eau chaude ou d'eau froide
  1. Limitation de la température réglable pour contrôler le débit d'eau chaude maximal
  1. Raccords à braser de 1/2 po
  1. 4 ports : entrées d'eau chaude et d'eau froide et 2 sorties d'eau
  1. Système de soupape commune M-PACT permettant de moderniser le style du robinet sans remplacer la plomberie
  1. Plaque de terrasse non comprise dans l'achat

Spécifications

Dimensions

Hauteur assemblé (en pouces)
6
Hauteur de l’emballage (en pouces)
6
Largeur assemblée (en pouces)
7
Largeur de l’emballage (en pouces)
7
Poids assemblé (en livres)
2.22
Poids de l’emballage (en livres)
2.22
Profondeur assemblé (en pouces)
7
Profondeur de l’emballage (en pouces)
7

Détails

Certifié
Couleur et fini
Laiton
Entretien des installations
Non
Pays d'origine
US-United States

Garanties et certifications

Garantie à vie limitée - pour détails, visitez http://fr.moen.ca/enfr/consumer-support/warranty ou appelez 1-800-465-6130
Raccord M-PACT Posi-Temp CC de 1/2 po avec équilibrage de pressionMOEN Raccord M-PACT Posi-Temp CC de 1/2 po avec équilibrage de pressionChanger le style de votre salle de bains n'aura jamais été aussi facile et rapide. Le système de soupape commune M-PACT vous permet de remplacer la garniture ou les finis de vos accessoires sans changer les soupapes. Une fois le système installé, vous pouvez changer votre décor aussi souvent que vous le souhaitez à n'importe quel moment durant vos travaux de construction ou des années plus tard. Il ne vous faudra que quelques minutes. Et le meilleur dans tout cela? L'installation du système de soupape commune est tout aussi facile que celle d'une soupape standard.
MOEN
1000691629
CAD1752024-05-28
Home Depot Canada
Raccord M-PACT Posi-Temp CC de 1/2 po avec équilibrage de pression est évalué 4.5 de 5 de 55.
  • y_2024, m_5, d_27, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_7, tr_48
  • loc_fr_CA, sid_1000691629, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 62ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par I seldom post reviews of items I have purchased, however these control valves are quite impressiv... I seldom post reviews of items I have purchased, however these control valves are quite impressive. Purchased two of these posi-temp valves while remodeling our bathrooms. The OEM valves, in our home, were the type that did not have any capability of automatically regulating the water temperature. These valves are also equipped with integral ball valves, allowing the hot & cold water supplies to be turned off to facilitate the main cartridge replacement. You do not need to shut off the water to your entire home to replace the cartridge. This is an excellent feature! I would highly recommend using these valves for remodeling or new construction.
Date de publication: 2017-07-18
Rated 5 de 5 de par I can not say more than it is a Moen product and lives up to the great reputation of Moen! The installation was not very difficult but I do have many years of experience in plumbing. The stops on the valve are very important just to be able to change a cartridge without needing to turn the water off to the whole house. The valve functioned perfectly and has every since it was installed.
Date de publication: 2013-10-24
Rated 4 de 5 de par Good Valve Good valve, although in order not to damage internal components you'll need to remove all the plastic and rubber pieces prior to heating this up with torch to avoid melting the components. I don't like how you need to replace the insert on an annual basis...
Date de publication: 2016-01-19
Rated 4 de 5 de par Valve works good, but make sure you re-lube the cartridge after removing to sweat the copper pipe... Valve works good, but make sure you re-lube the cartridge after removing to sweat the copper pipes (just make sure you do remove the cartridge before heating up the valve or you will melt the rubber 'O' ring on the cartridge), and then re-lube and re-insert the cartridge. Also clean out the cartridge chamber with a soft brush or clean lint-free rag BEFORE re-inserting the cartridge. I installed this valve one year ago and have to replace the cartridge and the plastic black handle adapter because increased force was necessary to turn the water control handle which caused wear on the plastic adapter and almost 1 in. of play before the water turned on! CALL MOEN and they WILL send you a FREE cartridge and adapter if this happens to you because the valve is lifetime warrantied, cartridge is very expensive!
Date de publication: 2018-11-27
Rated 5 de 5 de par Our plumber said we purchased the best valve on the market. It's all installed and works great. ... Our plumber said we purchased the best valve on the market. It's all installed and works great. I would definitely advise anyone replacing a shower valve to buy this one. However, if you have old plumbing you may have to move the pipes back into the wall deeper so your shower handle trim kit will fit flush with the wall. Our plumber didn't move our pipes back and we had to have him come back and redo the job.
Date de publication: 2016-11-27
Rated 4 de 5 de par Works as well as any other valve This product is fine. I did have some difficulty in deciding between the two valves recommended for the faucet I had selected. Apparently one of the valves is used for copper piping. I did not install the valve myself. The valve seems to work fine. The manufacturer does provide good e-assistance with their merchandise.
Date de publication: 2012-07-16
Rated 5 de 5 de par Moen Valve worked great make sure to remove plastic parts before soldering
Date de publication: 2016-08-03
Rated 1 de 5 de par I am so tired of fixing this I don't know how long I have had it but its time is about up!
Date de publication: 2018-03-20
  • y_2024, m_5, d_27, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_7, tr_48
  • loc_fr_CA, sid_1000691629, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 20ms
  • REVIEWS, PRODUCT

Mine leaks water out through the shower head after just 3 years. It there a way I can fix it with...

Mine leaks water out through the shower head after just 3 years. It there a way I can fix it without replacing it?
Posée par: Bubbs
When you soldered it, did you pull out all of the rubber inserts before? If not, the heat from the torch may have melted them a bit when you soldered it. Maybe you can just replace that part if you go direct with Moen? I wish I had some better advice but I am just a DIYer.
Répondue par: MikeD
Date de publication: 2019-04-22

Is the 1225 moen cartridge compatible with the moen 2570 posi temp

Posée par: June
No. Call Moen directly, I had a lot of trouble trying to get a new cartridge. I had multiple vendors, Rona, Home Hardware etc. tell me I could use a different cartridge and the original part number was discontinued etc. After several weeks messing around I finally called Moen and they were shipping me the correct one right away. The part number was right, the stores do not have experience with this one.
Répondue par: Briguy
Date de publication: 2022-01-12

Is this PEX compatible?

Will be purchasing Moen T2191 Align Posi-Temp Valve Trim and Moen S6320 Velocity 8" Two-Function Rainshower Showerhead with Immersion Technology at 2.5 GPM Flow Rate
Posée par: Rosegrower151
Yes, this PEX is compatible.
Répondue par: Communityanswer
Date de publication: 2023-05-03

I see this has only 2 pex connections. Do they make this in a model that has a 3rd pex connection to the shower?

Posée par: Dave
Hello Dave and thank you for your interest in Moen products. The Moen Posi Temp valve model# 2580 is available for PEX connections. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
Répondue par: Moen Plus Support
Date de publication: 2023-05-05

need to install it in a shower stall...can you cap off the tub line..what piece would be needed t...

need to install it in a shower stall...can you cap off the tub line..what piece would be needed to cap it off.
Posée par: Big Steve
Yes, this model comes with stops.
Répondue par: Communityanswer
Date de publication: 2023-05-04

does this valve include the cartridge or does that need to be purchased separately?

Posée par: hlb73
Hello Hlb and thank you for your interest in Moen products. The Moen Brass Rough-In Posi-Temp Pressure-Balancing Cycling Tub and Shower Valve with Stops - 1/2 in. CC Connection does include the 1222 Posi-Temp cartridge pre-installed. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 a.m.-7:00 p.m. Eastern Time Monday through Friday.
Répondue par: Moen Plus Support
Date de publication: 2023-05-06

What is the flow rate?

What is the flow rate?
Posée par: Rufe
It has a flow rate of 7.2 gallons per minute at 80 PSI.
Répondue par: Communityanswer
Date de publication: 2023-05-06

do the new trim packs also have a pull out handle that turns on the water and then adjusts the te...

do the new trim packs also have a pull out handle that turns on the water and then adjusts the temp? my valve is 25 years old and there are no moen numbers stamped on it.
Posée par: yina
The trim that you will purchase separately must be a turn trim from cold to hot to match this particular connection. It doesn’t pull out.
Répondue par: Bwk
Date de publication: 2020-02-22
  • y_2024, m_5, d_28, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_42
  • loc_fr_CA, sid_1000691629, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT