La propreté et la sécurité de nos magasins est l'une de nos principales priorités.  En savoir plus

Multinautic Kit de Rampe complet pour embarcations 2000 lb roues bleues

Modèle nº 19224|Nº UGS 1000731616

Aperçu

Modèle # 19224 Internet # 1000731616

Ce Kit de Rampe Multinautic<sup>®</sup> pour Petites Embarcations ou Motomarine vous permet d'assembler une rampe pouvant supporter jusqu'à 2000 lb de capacité. Ses rouleaux de dimension et de qualité supérieure montés sur essieux auto-ajustable faciliteront la montée et la mise à l'eau des motomarines plus lourdes ainsi que des petites embarcations. Cette rampe vous permettra de remiser uritairement votre embarcation en bordure du rivage sans risquer que les roches ou le sable n'endommagent votre coque ou votre turbine. De plus, bien sécurisés sur la rampe, votre embarcation ne frottera pas sur ou sous le quai du au mouvement des vagues. Vous pouvez aussi retirer le bouchon de vidange de votre chaloupe et assurer qu'elle ne se remplisse pas d'eau pendant les gros orages... La Paix d'esprit à très bas prix! Ce kit contient douze (12x) roues de 5po. (6x paires) sur essieux auto ajustables et braquettes de fixations, le rouleau de quille, le treuil et la courroie, les pieux, serre-pieux et plaques de fonds (bois vendu séparément)

  1. Parfaite pour protéger vos embarcations et vous assurer la tranquillité d'esprit
  1. Ajustables comme aucune autre avec les pieux et plaques de fond permettant de sajuster à votre rivage
  1. Sortez et remettez à l'eau vos embarcations facilement
  1. Facilite les remplissages de carburants et prévient les déversements gênants!
  1. Plan d'assemblage facile à suivre
  1. Bois (vendu séparément)

Spécifications

Dimensions

Hauteur assemblé (en pouces)
18
Hauteur de l’emballage (en pouces)
120
Largeur assemblée (en pouces)
48
Largeur de l’emballage (en pouces)
36
Poids assemblé (en livres)
120
Poids de l’emballage (en livres)
76
Profondeur assemblé (en pouces)
192
Profondeur de l’emballage (en pouces)
36

Détails

Certifié
Non
Decking inclus
Oui
Modulaire
Oui
Pays d'origine
CN-China
Type de quai
Rampe de bateau
Type de quai
Sur roues

Garanties et certifications

Garantie à vie limitée. Pour de plus amples détails sur notre garantie consultez notre site internet www.multinautic.com
Kit de Rampe complet pour embarcations 2000 lb roues bleuesMultinautic Kit de Rampe complet pour embarcations 2000 lb roues bleuesCe Kit de Rampe Multinautic<sup>®</sup> pour Petites Embarcations ou Motomarine vous permet d'assembler une rampe pouvant supporter jusqu'à 2000 lb de capacité. Ses rouleaux de dimension et de qualité supérieure montés sur essieux auto-ajustable faciliteront la montée et la mise à l'eau des motomarines plus lourdes ainsi que des petites embarcations. Cette rampe vous permettra de remiser uritairement votre embarcation en bordure du rivage sans risquer que les roches ou le sable n'endommagent votre coque ou votre turbine. De plus, bien sécurisés sur la rampe, votre embarcation ne frottera pas sur ou sous le quai du au mouvement des vagues. Vous pouvez aussi retirer le bouchon de vidange de votre chaloupe et assurer qu'elle ne se remplisse pas d'eau pendant les gros orages... La Paix d'esprit à très bas prix! Ce kit contient douze (12x) roues de 5po. (6x paires) sur essieux auto ajustables et braquettes de fixations, le rouleau de quille, le treuil et la courroie, les pieux, serre-pieux et plaques de fonds (bois vendu séparément)
Multinautic
1000731616
CAD774
Home Depot Canada
Kit de Rampe complet pour embarcations 2000 lb roues bleues est évalué 4.7 de 5 de 43.
  • y_2021, m_9, d_22, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_27, tr_16
  • loc_fr_CA, sid_1000731616, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 84ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par Great Rig Went together well. Definitely assemble with wood screws provide first. Hardware foes on muc easier on full assembled ramp.
Date de publication: 2021-07-04
Rated 5 de 5 de par Ramp kit Very functional. Easy to follow instructions. Screws are included but hidden. Find them before you buy some.
Date de publication: 2020-09-08
Rated 5 de 5 de par Excellent produit Excellent produit. Fonctionne à merveille. très facile à utiliser
Date de publication: 2020-08-11
Rated 5 de 5 de par Great Boat Ramp Fairly Easy to put together. Comes with all bolts and nuts. Makes putting the boat in and out much easier. Now anyone can get the boat in and out. Well worth the expense
Date de publication: 2020-08-11
Rated 5 de 5 de par Multinautic Ramp Kit Using a 4x4 for the winch support would be better than screwing two 2x4s together. Otherwise it does everything you’d want from it.
Date de publication: 2020-07-19
Rated 1 de 5 de par Poor Service around my price complaint Costco is a much better deal. they had the 2500 lb format for $499
Date de publication: 2020-07-13
Rated 5 de 5 de par Very solid, well designed, works beautifully The end product does an amazing job of getting our 14 feet boat with outboard engine out of the water, and all things considered, is not that hard to put together. The instructions however are not detailed enough or well organized. I thought I'd share my experience for those of you considering this product. Before I begin, I should mention that the 4 hrs estimate to assemble and install is very optimistic, unless you are 2 very experienced people who work independently on assembling the boat ramp. I did take my time because I didn't want to make mistakes, and as I mention below the instructions were hard to follow, so spent a lot of time trying to figure out where exactly things had to go. I know a lot but am not a construction worker by trade, so for example my holes for the bolts were not quite well aligned and I had to fiddle to get the back plates to fit. That being said, my observations: 1) The instructions are divided into 3 pages, 1 for structure, 1 for hardware, and 1 for wheels installation - read carefully, because each of them list what's included in the kit for that page/ step, and what tools you need for that page/ step. I am used to instructions that list everything you need to buy and tools you need for the entire installation in one place, so this was confusing. 2) Wood they tell you to buy assumes that your cross members are going to be 21". I made mine 30" because our boat is flat so is more stable with a wider ramp. They do tell you to measure the ideal location of the wheels and adjust your cross members accordingly. But that meant I didn't have enough wood with what they had said to buy in the instructions, thankfully I had some pressure treated wood left over from another project. 3) Instructions say to buy wood screws, but they were included in my kit, so check everything you have in the kit before you buy anything. I ended up with too many screws even with just those provided. 4) I strongly recommend using a drill to screw everything, because there are a lot of screws to install. You also need a Phillips head screwdriver (or bit) not mentioned in the instructions because there are square and Phillips head screws. 5) There were 4 different size and length of screws provided, it would be nice if the instructions specified what is used where. 6) The flat washers for the installation of the winch were not included, again thankfully I had washers from another project - check everything in the kit before you begin! 7) It is not specified how to screw the winch post to the brace - from the front? the back? the sides? I ended up doing it from the front i.e. the winch side, and added some screws on the sides. 8) The wheel diagram doesn't show that the wheels do come with the bolts to assemble. 9) One of the wheels axle was to thick to fit in the base, I ended up having to file it to make it fit. The base of the same wheel set was bent so would not fit on top of the wood, I straightened it with a wrench and a hammer. 10) They call it the post brace strengthener in the list of wood pieces needed, but the support blocks (I think!) in the diagram. They are 6" long, but the cross member is 5 1/2" (2x6) so wasn't clear how exactly to install it. Mine sticks out a bit but not an issue, it's just that in the photo they are flat to the top of the cross members and I just couldn't figure out how to make that happen. Instructions would be better with a blow up of where this goes and how. 11) Instructions don't say what screws to use for the bumper. It also says that the cross member where the bumper goes "could" be doubled, but if you don't double it you can't screw the bumper properly. Finally, I want to mention that assembled, the boat ramp weighs over 300 lbs - the kit alone weighs 120 lbs. So I would recommend to do the assembly close to where the boat ramp is going to be installed. I am a 59 year old woman, my son helped me put the boat ramp in the water, he was holding the end, I put the winch end on a dolly and rolled it while he carried the other end in the water. But I will say it again, it was fun to put together, it works very well and I am very happy with the result!
Date de publication: 2020-05-20
Rated 4 de 5 de par For PWC you need more wheels Picture is deceiving as it does not show the whole ramp. I was under the impression it came with 4 sets of wheels and it only came with 3. I hade to purchase 2 more wheels.
Date de publication: 2019-08-11
  • y_2021, m_9, d_22, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_27, tr_16
  • loc_fr_CA, sid_1000731616, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 54ms
  • REVIEWS, PRODUCT

would some combination of these work for a 2000 pound, 24 foot pontoon boat

Posée par: bobh
Hi, note that we are always there to answer your questions at 1-800-585-1237.
Répondue par: Multinautic
Date de publication: 2021-06-08

Are the boards for this ramp pre-drilled?

Posée par: Debbie
Hi, note that we are always there to answer your questions at 1-800-585-1237.
Répondue par: Multinautic
Date de publication: 2021-05-12

I have a PWC weighs about 800lbs. How much of an angle can you put this ramp on?

Posée par: lisa
Hi, note that we are always there to answer your questions at 1-800-585-1237.
Répondue par: Multinautic
Date de publication: 2021-05-11

Can I get a detailed list of lumber and hardware I need to build this kit?

Posée par: Captain
Hi, note that we are always there to answer your questions at 1-800-585-1237.
Répondue par: Multinautic
Date de publication: 2021-05-11

My boat is 16' long, are 3 sets of rollers enough for this length? the weight is 1700 lbs is the winch for this product (it is not listed) strong enough for my boat, what is it's weight capacity thank you

Posée par: Daniel
Hi, note that we are always there to answer your questions at 1-800-585-1237.
Répondue par: Multinautic
Date de publication: 2021-05-11

I would need this to have two sections to get my seadoo out of the water and up the shore far enough to keep Georgian Bay away. Is it possible to add an additional 10 ft piece at the front with additional rollers?

Posée par: LJB1
Thank you for the question.
Répondue par: Multinautic
Date de publication: 2021-05-07

I just bought the product and assembled. I'm happy with the end product. Before I dock the boat on the ramp, is there anything you would recommend to secure the ramp to the land? Should I place heavy cinder blocks or tie the ramp to a tree?

Posée par: Average Joe
Thank you for the question.
Répondue par: Multinautic
Date de publication: 2021-05-07

I have a Lund ProV 19 which is 19'7&quot; long and weighs about 2,000 lbs. 1) Will this work for my boat and 2) Does the wood come with the kit? 3) If not what should I order?

Posée par: WhiteLake181
I used the kit for my 16&rsquo; Lund Fisherman with a 40 hp Mariner. &nbsp;Boat and motor weigh approx 1500 lbs and the kit easily handles this weight and length of boat. &nbsp;The kit does not include the required lumber but does include all the necessary hardware to assemble the ramp. &nbsp;The included plans detail the lumber required and the package was easily assembled in less than a day. &nbsp;Your boat might be a little long and a little heavy for the package as supplied but with the addition of a few extra rollers and using 2x8 instead of 2x6 lumber, it might work. &nbsp;Mine works great.
Répondue par: Garnet
Date de publication: 2020-05-19
  • y_2021, m_9, d_22, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_fr_CA, sid_1000731616, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 76ms
  • QUESTIONS, PRODUCT