Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Aperçu

Modèle # SFL618 Internet # 1000720774

La cloueuse à plancher 3 en 1 et agrafeuse de NuMax est idéale autant pour les professionnels que pour les propriétaires. Cette cloueuse est facile à utiliser et enfonce les trois types d'attaches pour plancher : agrafes à plancher calibre 15 1/2, clous en T calibre 16 et clous en L calibre 16 de longueurs allant de 1 1/2 po à 2 po. La cloueuse de NuMax est munie dune poignée longue portée pour un usage plus confortable et 2 embases interchangeables vous permettent d'installer un parquet embouveté à rainures de 1/2 po, 15/32 po, 5/8 po, 19/32 po, 3/4 po et 25/32 po. La cloueuse à plancher de NuMax est aussi livrée avec un maillet en caoutchouc blanc non marquant. Les cloueuses NuMax offrent la meilleure solution comparativement à la location, car leur valeur justifie rapidement leur coût en regard des frais de location et du temps perdu à aller cueillir et rendre l'outil. Lachat dune cloueuse à plancher plutôt que la location vous permet de travailler à votre rythme et de vous assurer dun projet bien réalisé sans vous presser pour diminuer vos frais de location.

  1. Chargeur en aluminium accueillant les bandes de 100 clous
  1. Construction légère en fonte d'aluminium
  1. Prise coussinée pour une utilisation confortable
  1. Magasin plus long pour une capacité de charge accrue
  1. Poignée longue portée éliminant les tensions au dos
  1. Compatible avec toutes les grandes marques de clous en L et en T calibre 16 et dagrafes calibre 15 1/2

Spécifications

Dimensions

Hauteur assemblé (en pouces)
26
Hauteur de l’emballage (en pouces)
26
Largeur assemblée (en pouces)
24
Largeur de l’emballage (en pouces)
24
Poids assemblé (en livres)
14
Poids de l’emballage (en livres)
14
Profondeur assemblé (en pouces)
6
Profondeur de l’emballage (en pouces)
6

Détails

Angle de la cloueuse
0
Arrivée d'air minimale recommandée en pi³ standard/min à 90 psi
1-5
Arrivée dair minimale recommandée à 90 psi (en pi³ standard/min)
2.2
Calibre (cal.)
16
Pays d'origine
CN-China
Pression minimale recommandée lors du fonctionnement (en psi)
70
Sans fil/avec fil
Avec fil
Source dalimentation
À air
Système de batteries
Autre
Taille maximale de lattache (en po)
2
Taille minimale de lattache (en po)
1.5
Tension de batterie
Pas de tension précise

Garanties et certifications

Garantie limitée NuMax de 1 an. Veuillez vous adresser au 888-669-5972 si vous avez des questions.
Cloueuse à plancher 3 en 1NuMax Cloueuse à plancher 3 en 1La cloueuse à plancher 3 en 1 et agrafeuse de NuMax est idéale autant pour les professionnels que pour les propriétaires. Cette cloueuse est facile à utiliser et enfonce les trois types d'attaches pour plancher : agrafes à plancher calibre 15 1/2, clous en T calibre 16 et clous en L calibre 16 de longueurs allant de 1 1/2 po à 2 po. La cloueuse de NuMax est munie dune poignée longue portée pour un usage plus confortable et 2 embases interchangeables vous permettent d'installer un parquet embouveté à rainures de 1/2 po, 15/32 po, 5/8 po, 19/32 po, 3/4 po et 25/32 po. La cloueuse à plancher de NuMax est aussi livrée avec un maillet en caoutchouc blanc non marquant. Les cloueuses NuMax offrent la meilleure solution comparativement à la location, car leur valeur justifie rapidement leur coût en regard des frais de location et du temps perdu à aller cueillir et rendre l'outil. Lachat dune cloueuse à plancher plutôt que la location vous permet de travailler à votre rythme et de vous assurer dun projet bien réalisé sans vous presser pour diminuer vos frais de location.
NuMax
1000720774
CAD1742022-09-30
Home Depot Canada
Cloueuse à plancher 3 en 1 est évalué 4.6 de 5 de 523.
  • y_2022, m_9, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_25, tr_498
  • loc_fr_CA, sid_1000720774, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 158ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Works great! Bought this nailer to perform a 3/4" hardwood floor install that I knew would take me several weeks due to my time restraints and I am not a pro. Would have been much more expensive to rent one than just to buy this one. I have finished one room (dining room) and am in the process of completing a living room and it works GREAT! After hooking up the air compressor to it the install has gone smoothly. One jam so far due to operator error, I hit it too lightly once, but was able to get it cleared quickly and easily. Leaves no marks on the floor and is sturdy. Works well for the weekend project guy like me. The floor came out great.
Date de publication: 2012-09-17
Rated 5 de 5 de par Very impressed! I went out on a limb and bought this Numax floor stapler because it has such good reviews. I have zero regrets! This thing works like a champ. I just finished about 500sf of solid 3/4 red oak with no problems whatsoever. I had 800sf total and did the first 300sf with the floor stapler Home Depot rents for $32 for 24hrs. I could tell no difference, and I didn't have to worry about getting it back on time. I could also use the same 1 1/2" Bostitch staples I was using with the Home Depot rental (good thing cause I bought a case). With the wood I have left over I think I'll knock out the walk in closet. I own my own floor stapler! Smart purchase.
Date de publication: 2013-04-07
Rated 5 de 5 de par Fantastic Tool I am so glad I purchased this tool for my flooring project. I used 2" staples for my 3/4" oak tongue and groove laid atop a 1-1/2" sub floor. I had ZERO problems with the tool, no misfires at all just a few bent staples that likely were shot into an existing nail in the sub floor. I added a few drops of oil each time a reloaded the magazine. If I had rented a nail gun I would have had to work much faster in order to minimize costs. Instead I worked at my own pace over the course of 4 days and I still have the gun. In my mind, the gun was not nearly as loud as other reviews led me to believe.
Date de publication: 2013-09-16
Rated 5 de 5 de par Excellent Nailer This is an excellent nailer. Used it with 1.5" staples to install 600 square feet of strand woven bamboo flooring and it worked perfectly. Never had a jam and is excellent quality. ** Pro Tip ** put about 5 drops of oil in the air port each time you refill the staples or nails and it will stay well oiled and prevent jams. ** Pro Tip 2 ** I put some liquid whiteout on the teeth on both sides of the nailer (see picture) so I could easily see that it was lined up. Black nailer on dark wood makes it hard to see, but with a little white, I could easily see it.
Date de publication: 2014-07-18
Rated 5 de 5 de par 1,000 sq ft of 3/4" hickory First time laying a floor and boy was it a job. I had read the reviews on this gun before purchasing and decided it was worth the risk, and way better than renting one for 70$ a day. Was able to work at my own pace without feeling rushed. I used the power nail 1 3/4" cleats in this gun. Only one jam during the whole flooring job and it cleared easily. I would recommend if you're a guy like me who likes doing things yourself (to see they're done right) and you plan on laying hardwood BUY THIS GUN. I even have decided to not sell the gun at our annual garage sale, as originally planned, after the install. It's a terrific value and these reviews are extremely accurate. Thanks for reading.
Date de publication: 2015-07-27
Rated 5 de 5 de par Numax 3 in 1 nailer we are over 200 miles from nearest store. Rental is out of the question. This tool was cheap enough for a one time use and did an excellent job. I had 600 sq ft of hardwood to install. This tool worked excellent with compressor hose regulator set to 95 psi. The gun did not jam once and drove 2" L nails all the way down to 60 psi. I have finished my project and would recommend or loan this tool out to friends/neighbors without hesitation. The only problem I had with it was that I though the balance was a bit too far forward and had to check the tool position before driving each nail.
Date de publication: 2011-02-22
Rated 1 de 5 de par Great Price - Poor Performance I don't know what everyone else is raving about with this gun -- I was installing 3/4" Hickory flooring and using staples to install Got to about the 3rd row in and the gun would start jamming every other staple I had to consistently clear the gun with jammed staples or pull out the half fired staple in the floor. I even used Bostich staples. I lubricated the gun several times - no difference. I found theat the firing hammer would not retract to fire the staples. Long story short -- I returned it - took the plunge and bought the Bostich Gun - and never had a problem since. Don't waste your money if you plan on using staples. Spend the extra dough and buy a good gun Well worth all the aggravation it saves.
Date de publication: 2012-03-07
Rated 5 de 5 de par Get MORE Than You Pay For.....FINALLY! My wife and I decided to install our Bruce hardwood ourselves. So, I chose to use the NuMax nailer to install 800 square feet of 2 1/4 by 3/4 inch solid red oak flooring. The nailer worked flawlessly. I used about 7,000 Bostitch 2 inch 16 gauge L cleats and had ZERO jams. I used a 150 psi pancake compressor set at 100-105 psi. I also used a couple drops of nailer oil about every third time I refilled the cleats. This proved to be way cheaper than renting a nailer. Plus, I didn't feel the time crunch to get the job done. This was my first installation of solid hardwood flooring and I am a DIY guy. I highly recommend the NuMax flooring nailer to professionals and novices alike.
Date de publication: 2015-09-05
  • y_2022, m_9, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_25, tr_498
  • loc_fr_CA, sid_1000720774, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Does base plates have protective coating that won't scar wood surface

Posée par: RJ
yes it comes with one good for 3/4 " flooring and 1 for 3/8-1/2
Répondue par: docs427
Date de publication: 2018-04-27

Can this floor stapler be used with 1/2 inch engineered flooring and if so what size staples will...

Can this floor stapler be used with 1/2 inch engineered flooring and if so what size staples will be the best to use?
Posée par: Debbie
If the engineered flooring is tongue and groove, then yes. The size of the staples will be depend on what the flooring is being fastened to. You must also be cognizant of the air pressure setting you are going to use to penetrate but not over penetrate the material. When I did my 3/4" tongue groove oak I ran several tests to get that setting correct. I used 1 1/2" staples. My sub floor was 1" actual installed on 3x6 beams at 20" OC. I have attached a grainy photo taken with an old iPOD, but it will give you an idea of the job I did back in 2013 on an 1850's Vermont farmhouse using this nailer. It worked flawlessly.
Répondue par: Waldeje
Date de publication: 2022-04-17

will this nailer work on 5/4 tongue and groove board?

Posée par: ken
I used this on 3/4" flooring and had no issues, but assume you are using for decking or some other special application. I think the only concern would be the 2" cleats reaching to the attachment point. Best recommendation would be to get it and give it a try and if it doesn't work for your application it is really easy to take back. If it does work then it will be a huge time saver.
Répondue par: DP600
Date de publication: 2019-08-24

What FC and FS stand for?

Any other tips for a dyi ?
Posée par: Lizy
FS stands for floor stapler (staples) and FC stands for floor cleat (nails). Depends on flooring. Solid hardwood normally use cleat and Engineering hardwood use staples. My floor's solid red mahogany (3/4" thick) and I used cleats. Thanks
Répondue par: Scott
Date de publication: 2019-08-06

One year ago,I used was great,now is second time,what the nail can not all way in ?

Posée par: Ming
Not sure how to answer this question except offer 2 possibilities. Maybe the air pressure is not high enough? Or the user did not apply enough oil or as frequently as needed?
Répondue par: JoeC
Date de publication: 2018-03-01

WHICH NAILER DO I USE TO NAIL 2X4 WOOD STUDS

WHICH NAILER DO I USE TO NAIL 2X4 WOOD STUDS
Posée par: GATO
Not a floor nailer.
Répondue par: Mike
Date de publication: 2018-04-07

will this work 3/4 in maple how many nails for 1000 sq ft

Posée par: sandman
YES THIS GUN WILL WORK ON 3/4 " MAPLE. THE AMOUNT OF FASTENERS USED IS BASED ON YOUR SUB FLOORING AND SHOULD BE SUBMITTED TO THE COMPANY THAT MANUFACTURED THE FLOORING BEING INSTALLED.
Répondue par: RETIRED
Date de publication: 2019-06-20

Can the flooring nailer be used for pre-finished solid wood?

Posée par: chris
yes, I just did 200 sq of prefinished. worked well
Répondue par: docs427
Date de publication: 2019-06-20
  • y_2022, m_9, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_36
  • loc_fr_CA, sid_1000720774, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 53ms
  • QUESTIONS, PRODUCT