L’événement Les journées Milwaukee est en cours. N’attendez pas!  Magasiner maintenant

Aperçu

Modèle # 2765 Internet # 1001836513

Protégez votre maison contre les dommages causés par l'eau grâce aux produits de gouttière, soffite et fascia en aluminium de Peak. Faits d'aluminium robuste, nos produits sont attrayants, fiables et ne nécessitent aucun entretien. Ils ne rouillent et ne fuient pas, ce qui est idéal pour conserver la beauté de votre demeure pendant des années. Nos produits sont robustes et attrayants, mais qu'est-ce qui les rend si exceptionnels? Tous les composants sont revêtus d'une peinture polyester extérieure, à l'intérieur comme à l'extérieur, pour vous procurer un produit durable, qui a une belle apparence de n'importe quel angle. De plus, nos étriers de gouttière sont conçus pour en faciliter l'installation en toute sécurité et d'une seule main! Pour plus de protection, ajoutez à votre système des protège-gouttières en aluminium de Peak pour empêcher l'accumulation de feuilles, de débris et de tout autre objet aussi mince que des aiguilles de pin!

  1. Utiliser pour boucher le côté droit de gouttières de 5 po
  1. Fait d'aluminium robuste pour plus de résistance et durabilité
  1. Finition avec peinture en polyester extérieure sur les deux côtés du capuchon d'extrémité
  1. Plus écologique que d'autres produits en PVC
  1. Plus écologique que d'autres produits en PVC
  1. Plus écologique que d'autres produits en PVC

Spécifications

Dimensions

Hauteur assemblé (en pouces)
0.5
Hauteur de l’emballage (en pouces)
0.25
Largeur assemblée (en pouces)
3.63
Largeur de l’emballage (en pouces)
3.63
Poids assemblé (en livres)
0.08
Poids de l’emballage (en livres)
0.08
Profondeur assemblé (en pouces)
5.38
Profondeur de l’emballage (en pouces)
5.38

Détails

Pays d'origine
CN-China

Garanties et certifications

Pour plus d'informations, veullez contacter le Service a la clientele de Peak Products a 1-877-883-7325
Capuchon d'extrémité droite de gouttière en aluminium de 5 po blancPeak Capuchon d'extrémité droite de gouttière en aluminium de 5 po blancProtégez votre maison contre les dommages causés par l'eau grâce aux produits de gouttière, soffite et fascia en aluminium de Peak. Faits d'aluminium robuste, nos produits sont attrayants, fiables et ne nécessitent aucun entretien. Ils ne rouillent et ne fuient pas, ce qui est idéal pour conserver la beauté de votre demeure pendant des années. Nos produits sont robustes et attrayants, mais qu'est-ce qui les rend si exceptionnels? Tous les composants sont revêtus d'une peinture polyester extérieure, à l'intérieur comme à l'extérieur, pour vous procurer un produit durable, qui a une belle apparence de n'importe quel angle. De plus, nos étriers de gouttière sont conçus pour en faciliter l'installation en toute sécurité et d'une seule main! Pour plus de protection, ajoutez à votre système des protège-gouttières en aluminium de Peak pour empêcher l'accumulation de feuilles, de débris et de tout autre objet aussi mince que des aiguilles de pin!
Peak
1001836513
CAD1.482024-07-14
Home Depot Canada
Capuchon d'extrémité droite de gouttière en aluminium de 5 po blanc est évalué 4.4 de 5 de 363.
  • y_2024, m_7, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_243, tr_120
  • loc_fr_CA, sid_1001836513, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 57ms
  • REVIEWS, PRODUCT
Rated 3 de 5 de par Leaves & Debris ON gutter rather than IN gutter. I installed this kit around the back of my house where we have heavy leaf and tree debris. Usually, it takes a good hour of power washing to clean out my gutters each fall. This kit reduced my cleaning time down to about 10 minutes using only a leaf blower. Don't be misled – debris will still pile up on the gutter guard due to its design, just not *in* the gutter. I would have preferred a completely flat-surfaced design so the debris just blows off, but this kit was the only thing that fit my particular eaves roughing. To be fair, the retaining lip in the design that prevents debris from just blowing away, also prevents rain from washing right off the edge of the house.
Date de publication: 2021-11-19
Rated 4 de 5 de par Did the trick I bought four of these as my house has a flat roof and the drains had no strainers of any kind. Most of the trees in my area have small leaves so I was concerned that the gap between the grating was too big. To supplement these I bought a small amount of screen door mesh and wrapped a piece around each strainer and then installed the ring. This worked great and allows water to still drain but nothing else to enter the drain. The included rings were slightly larger than my drains so because they are thin gauge aluminum I simply used a pair of scissor to make a cut from top to bottom. When I installed the rings into the drain the diameter could now be reduced and the ends just overlapped each other slightly.
Date de publication: 2017-04-07
Rated 4 de 5 de par Nice gutter but use rivets! I followed Peaks instructions and ended up with a leaky gutter! The sections fit together poorly and when the joint hanger was screwed in gaps formed between the sections at the lap joints causing the thin layer of caulking to pull apart. I ended up assembling the entire gutter length (36') on the ground by caulking and clapping each lap joint and adding two aluminum rivets to the back (This Old House tip!) and one to the front near the top. I allowed 24 hours for the caulking to completely cure before moving the gutter.
Date de publication: 2016-09-15
Rated 5 de 5 de par Peak Products 5" Aluminum Gutter Guard An incredibly ingenious design! An absolute snap to install especially for someone like me who is spatially challenged. The 4 ft. length makes it easy to handle - especially when you're up on a ladder or on the roof. Every length is a perfect fit and attached with only 3 self tapping metal screws. The Peak "Gutter Guard" is, in my opinion, the best gutter guard on the market. Superb construction, well priced and after 4 months of heavy rains, they work flawlessly.
Date de publication: 2013-03-04
Rated 5 de 5 de par Great product but use some Philips screws Great product, better fit than the MHomes product. But I recommend you buy some SS Robertson pan heads so you can install one handed with the cordless drill. Phillips screws are a poor choice. But the actual gutter guard is great, good end to end recessed nested fit. Appreciated the pre-etched cardboard corner template. I would use again and recommend. I await to see how they do in winter and big storm events. But this locatoin is too high to clean from a ladder. I was able to install from the roof (using safety equipment)
Date de publication: 2013-10-08
Rated 3 de 5 de par Ambivalent I decided to wait for a few months after installing before I commented. As previously mentioned by others, easy to install, fit into gutters nice and snugly, Canadian made, decent price point and really do work at keeping eaves troughs from plugging up. Unfortunately guards are stamped in such a way that when installed there is a sheltered 3/8 inch deep by approximately 2 1/2 inch wide "dead zone" the entire length of the trough. Pine needles in particular accumulate (pile?) in this dead zone restricting water from entering the gutter trough. So far I've taken the leaf blower out once a month to blow off the pine needles. If the top of the gutter guard were not "a dead zone" but were flat or convex, the prevailing breeze may have been able to blow some of the deterius away instead of me pulling out the leaf blower. I expected more from the product and wish I had researched other alternatives a little more thoroughly.
Date de publication: 2019-08-14
Rated 1 de 5 de par Plastic too weak to stay in place It's been 2 years since I installed these around my garage to prevent leaves from clogging the eves. Since then the flimsy plastic mesh has collapsed and sunk into the eves troughs. The leaves still collect in the troughs on top of the mesh, but the mesh does seem to prevent the troughs from blocking the downspouts completely. At least for now... I anticipate as more leaves build up the weak mesh will collapse even more, with the result the downspouts will eventually clog totally again. I'm getting quotes for a proper aluminum eves trough filter system, which I should have done in the first place. Stay away from this product as it fails miserably...
Date de publication: 2023-05-24
Rated 1 de 5 de par Cheap is the only thing going for it What a frustrating waste of time that was. The stems of the leaves drop through the giant mesh holes, trapping the leaves from blowing away, and the finer tree blossoms would get matted in the mesh. There's also not enough rigidity to hold them in place. They would collapse in some spots and pop out in others. All kinds of debris made it through these guards. Spent more time cleaning the mesh and refitting them than I would have just cleaning the gutters.
Date de publication: 2020-12-27
  • y_2024, m_7, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_243, tr_120
  • loc_fr_CA, sid_1001836513, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 32ms
  • REVIEWS, PRODUCT

Hi. I have a 42 foot length of gutter. If this fits under drip edge would the last half of the run be at a pretty severe slope and just drain the water over the side with a heavy downpour?

Posée par: Robin
The gutter guard does fit under the shingles that should already be extending over your gutter, so you should have no problem with leakage there. In a really heavy downpour there is potential, in theory, for the water to come off the gutter but i have not had an issue with that. I use a brush on an extended pole to brush away anything that might accumulate and I have not had to go on my roof for about three years and I was going up a couple of times a year previously. I did find gutter guards with smaller holes or mesh tended to have water come over them. These are the best gutter guards I have found I I have tested out a few types..
Répondue par: Johnny
Date de publication: 2023-08-31

Wouldn't leaves, dirt, moss, pine needles, branch debris etc. accumulate on top this mesh which would block many of the holes in the mesh causing rainwater overflow during heavy rain ?

Posée par: cantrin
Yes it will accumulate but does was and blow off. Had 5" for years and really no problem. Lots of pine needles leaves etc
Répondue par: Shaddykins
Date de publication: 2021-10-01

How do you install the gutter guard with a metal roof? Can you post the installation manual?

Posée par: pinky
The gutters shouldn't interfere with your roof. These simply snap on the gutter, which is separate, and you pop a screw in to hold them there (use a drill to put the screw in)
Répondue par: Ctaylor
Date de publication: 2020-06-03

Hi, I have an old gutter system which using nails. Some of the nails are broken so I need to replace them. Will this gutter hanger work for the old gutter system? Thanks.

Posée par: Jack
We used these hangers to replace nails in older gutters.
Répondue par: Gccc
Date de publication: 2020-05-27

Since these lay flat in the gutter creating a mini trough, it looks like debris will sit there eventually preventing water from getting in the gutter.  Other brands, like Easyon have a slope that looks like debris might slide off. Do either ot these clog?

Posée par: Roter
I have not had any clogging at all. In fact i checked last week because of the same concern that you are questioning, and i found no build-up of foreign materials/leaves etc. Mine were installed over a year ago.
Répondue par: Anthony63
Date de publication: 2020-09-23

Will this product work if the roof has drip edge installed?

Posée par: Martin
Hi, Thank you for your question, The vendor have confirmed that Yes, gutter guard will work on a roof with an installed drip edge. Vendor have requested to get in touch with them at 1-877-883-7325 or by e-mail at cservice@peakproducts.com for further assistance.
Répondue par: The Home Depot Canada
Date de publication: 2023-11-08

Is this item designed to fit under the drip edge 

Posée par: Billysw6
Hello Billysw6, thank you for your question. Yes, it should fit under the drip edge.
Répondue par: Product Expert
Date de publication: 2021-06-28

What is the recommended spacing?

Posée par: jeffthegeo
Hello Jeffthegeo, we greatly appreciate your question! Our recommended spacing for the gutter hangers is 2' between each hanger. If you have any other questions or concerns please don't hesitate to contact us at 1-877-883-7325 or by e-mail at cservice@peakproducts.com
Répondue par: Product Expert
Date de publication: 2021-03-08
  • y_2024, m_7, d_13, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_68
  • loc_fr_CA, sid_1001836513, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 35ms
  • QUESTIONS, PRODUCT