Magasinez les aubaines du Vendredi fou que vous ne voudrez pas manquer!  Magasiner les articles de l’événement

Peak Railblazers Barrière large en aluminium de 42 pouces de haut pour rampe de terrasse, noir mat

Modèle nº 91166|Nº UGS 1001500480

Choisissez vos options

Aperçu

Modèle # 91166 Internet # 1001500480

Le système de garde-corps en aluminium RailBlazers® est conçu avec un accent mis sur le style, la durabilité et la qualité. Notre système de garde-corps breveté est conçu pour être sûr, facile à utiliser et facile à installer. Fabriqué à partir d'aluminium revêtu par poudre pour un entretien réduit et des performances durables. Personnalisez-le avec des lattes en aluminium standard ou larges, des panneaux de verre, et plus encore! Disponible en noir et blanc. Obtenez de beaux résultats PRO. La barrière à lattes larges est vendue avec tout ce dont vous avez besoin pour installer une barrière entièrement fonctionnelle (fixations, charnières et ensemble de verrouillage. Cette barrière est idéale pour une apparence chic et classique. L'ouverture maximale de la barrière est de 46 pouces et les poteaux amovibles vous permettent de les ajuster pour s'adapter à une ouverture plus étroite pour votre projet personnalisé.

  1. Utilisez notre outil interactif de conception de rampes pour planifier et concevoir votre projet de rampe de terrasse ou de rampe d'escalier : https://peakproducts.com/en-ca/peak-railing-designer-for-thdca//ca/en.
  1. Barreaux de 15 po pour créer un style moderne
  1. Utilisez nos installations vidéos étape par étape dans la galerie ci-dessus pour vous guider tout au long de votre projet d'installation
  1. Ouverture maximale de la barrière : 46 inches
  1. Poteau amovible pour permettre d'ajuster la barrière lorsque l'ouverture est plus étroite
  1. Revêtement par poudre durable et résistan

Spécifications

Dimensions

Hauteur assemblé (en pouces)
2.8
Hauteur de l’emballage (en pouces)
2.8
Largeur assemblée (en pouces)
40.16
Largeur de l’emballage (en pouces)
40.16
Poids assemblé (en livres)
13.9
Poids de l’emballage (en livres)
13.9
Profondeur assemblé (en pouces)
43.11
Profondeur de l’emballage (en pouces)
43.11

Détails

Bois traité sous pression
Non
Caractéristiques
Résistant à l'eau, Préfini
Couleur possible
Noir mat
Famille de couleurs
Noir mat
Forme de la partie supérieure
Plat
Hauteur nominale (en pouces)
42
Largeur nominale (en pouces)
42
Matériau
Aluminium
Matériau du garde-corps
Aluminium
Nombre de balustres inclus
6
Pays d'origine
MX-Mexico
Profondeur nominale (en pouces)
2.8
Style de la partie supérieure
Carrée
Taille
3-1/2
Type de main courante
Traverse universelle

Garanties et certifications

Pour plus d'informations, veullez contacter le Service à la clientèle de Peak Products à 1-877-883-7325
Barrière large en aluminium de 42 pouces de haut pour rampe de terrasse, noir matPeak Railblazers Barrière large en aluminium de 42 pouces de haut pour rampe de terrasse, noir matLe système de garde-corps en aluminium RailBlazers® est conçu avec un accent mis sur le style, la durabilité et la qualité. Notre système de garde-corps breveté est conçu pour être sûr, facile à utiliser et facile à installer. Fabriqué à partir d'aluminium revêtu par poudre pour un entretien réduit et des performances durables. Personnalisez-le avec des lattes en aluminium standard ou larges, des panneaux de verre, et plus encore! Disponible en noir et blanc. Obtenez de beaux résultats PRO. La barrière à lattes larges est vendue avec tout ce dont vous avez besoin pour installer une barrière entièrement fonctionnelle (fixations, charnières et ensemble de verrouillage. Cette barrière est idéale pour une apparence chic et classique. L'ouverture maximale de la barrière est de 46 pouces et les poteaux amovibles vous permettent de les ajuster pour s'adapter à une ouverture plus étroite pour votre projet personnalisé.
Peak Railblazers
1001500480
CAD3362022-11-29
Home Depot Canada
Barrière large en aluminium de 42 pouces de haut pour rampe de terrasse, noir mat est évalué 4.6 de 5 de 561.
  • y_2022, m_11, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_352, tr_209
  • loc_fr_CA, sid_1001500480, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 72ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Beautiful view This glass just drops into the slots on the deck rail framing. Looks great - we could'nt be more pleased. Easy installation. A professional company quoted upwards of $145/ linear foot installed. Nice , but I did the job easily at less than 1/3 the cost with 6 hours of easy work ( not too fast a worker)
Date de publication: 2016-06-15
Rated 3 de 5 de par Will not work with most staircases I used this railing system for my new deck, but now that I am building a staircase I am in trouble. The longest length is 6 ft and I need 12 feet of railing since it is illegal to require the hand to be lifted from the handrail to go over a post to grab the handrail again. Their continuous handrail kit is also not an option. It does not have pickets. So you have to build a complete staircase railing system from somewhere else and then screw on this additional handrail beside it. It looks silly. Any deck height that is more than about 3-4 feet will not work with Peak Products staircase railing system.
Date de publication: 2022-07-30
Rated 4 de 5 de par Looks fantatstic!!! I love the product, I looks real nice when it is finished. The only down side of the product is they get you for cost on everything. Everything is sold separate, if you buy the posts you need to buy the base cover, if you buy the glass you need to buy the glass seal. Things like these go hand in hand and don't work with out the other. just another added cost, should be packaged together
Date de publication: 2018-08-16
Rated 3 de 5 de par Not 42 inches Home Depot, update the specifications on this please. The panel under specifications says 66 by 42, it is not. it is 66 by 36 5/16. The 42 is for a finished rail panel with parts additional to this, which would also change the width when installed so why list one as is dimension and one as installed dimension? Misleading at best
Date de publication: 2020-05-04
Rated 2 de 5 de par Pickets rattle, instructions antiquated The end result was ok, but I have two areas of feedback: 1) It took much longer than expected. The instructions appear vey clear but failed to identify which brackets went where. Further instructions were laid out in steps A, B, C etc. Some of the brackets were labeled A, B, C, but these things did not correlate to the steps. Cutting the railing was a bit more challenging than I expected with a hacksaw. Took a while to make the 4 cuts and to ensure the angles were correct 2) I think as someone else mentioned, the pickets rattle when you walk on the deck.
Date de publication: 2021-07-26
Rated 3 de 5 de par Railing ends not cut square We bought four of the eight foot railings since we needed to splice the railings together for a longer run of stairs. The ends of the railings are not square when measured with a square. When attempting to use the splice insert there is a gap at the joint. If you are going to splice these you will need to cut the railing ends square first. This seems a needless step for a machined product which should be square to start with. I would not have bought them if I had know they were not accurately constructed. We used them but had to shorten the railing a little to cut the ends square.
Date de publication: 2022-05-29
Rated 5 de 5 de par Impressive I bought these 5 years ago, they were easy to install, I've always been careful not to brake them. This winter a lot of snow and ice came down from my steel roof and hit my rail, 1 glass got off and fell 11 feet down on ice, I was sure I it would be in pieces but I was very surprised to see it in 1 piece, not even a scratch on it. WOW
Date de publication: 2017-04-02
Rated 1 de 5 de par Not as good as the straight railing I installed the entire system on my new deck. The straight railing system is top notch stuff but the stair railing is defiantly lacking. The gap around the pickets is not adjustable and no way to close or hide the large gap. The video on website for install shows adjustable inserts but the product bought has no way to adjust. Not happy with the way it looks. Takes away from the rest of the railing that looks great.
Date de publication: 2022-05-18
  • y_2022, m_11, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_352, tr_209
  • loc_fr_CA, sid_1001500480, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 49ms
  • REVIEWS, PRODUCT

Can this gate be locked with pad lock in some way?

Posée par: JohnBoy
No, you need to add your own hardware to latch it and then you can put lock on it.   
Répondue par: Jojo
Date de publication: 2020-04-14

We are considering the RailBlazer for our new deck. We have an area that the deck is butted up against the pool. Would you recommend the glass railing for beside a pool?

Posée par: amy007
I’m not sure how the chlorine would effect the finish on the railing but I’m sure it would look great!   We installed ours last year and we love it.   We used a combination of 4 foot and 6 foot sections just to jazz it up a bit.   Very easy to install.   Expensive but we fell it was worth it for the result.   
Répondue par: Susan
Date de publication: 2020-07-25

can the railing be cut shorter?

Posée par: shehnai
Yes. I cut every section to a custom length using a hand metal saw. The cuts are easy being that the rail is hollow aluminum.
Répondue par: Help
Date de publication: 2022-10-23

can you use 2 6 foot railings to make a 12 foot railing?

Posée par: kat 45
you can only join 2-6 foot rails if you have a post between the two sections
Répondue par: Bob27
Date de publication: 2021-06-23

I want to buy this rail system but I need to know first if I can adjust the angle of the STAIR RAIL? or is it a fixed angle?

Posée par: ScubaPhil
Yes you can adjust the angle 
Répondue par: Ihaveanswers
Date de publication: 2021-06-03

Do I have to leave a space between the post and the glass, I know it says a max of 3 inches in between, but we want it to be butt up against the posts. ( trying to block mosquitoes)

Posée par: Happy123
Hello and thanks for your question. Yes ideally there is at least a 1/2 inch gap left between the post or spacer and the glass. The reason for this is to allow for any expansion and contraction of the aluminum. Please feel free to give us a call if you have any additional questions. 877-883-7325. Thank you!
Répondue par: Product Expert
Date de publication: 2020-07-24

does anyone know how the 66" glass panels are packaged? we have to pick up at store and just wondering how well they are packaged, thank you

Posée par: candk
The panel I purchased was in a cardboard box with reinforced ends. I was able to transport inside my car. I would not have wanted to tie it on roof racks though.
Répondue par: beheather
Date de publication: 2022-03-02

I made my 4 by 4 support posts as my railing supports. will this kit work with wood supports?

Posée par: Ben87
Yes it will work, but note the glass height is not as high as required for a frameless topside finish. I had to put an additional frame member across the top.
Répondue par: Vince13
Date de publication: 2020-08-13
  • y_2022, m_11, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_159
  • loc_fr_CA, sid_1001500480, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT