L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # PW1100-12 Internet # 1001281873

PowerBright PW1100-12 Onduleur de puissance à onde modifiée de 1100 watts à 12 volts CC à CA. Obtenez le pouvoir sous tension! Cet onduleur robuste se connecte directement à la batterie avec les câbles fournis pour alimenter les ordinateurs portables, les téléviseurs, les consoles de jeu et autres appareils électroniques et petits appareils de votre véhicule ou de votre domicile!

  1. Puissance continue de 1100 watts, puissance de crête de 2200 watts, fournit 9,2 ampères
  1. Boîtier en aluminium anodisé offrant durabilité, ventilateur de refroidissement intégré, fusible externe remplaçable
  1. Affichage à DEL pour la tension d'entrée et la puissance de sortie, prises doubles à 3 broches 120 volts 60 Hz
  1. Indicateur de surcharge, interrupteur marche / arrêt
  1. Câbles de la pince crocodile inclus
  1. CE approuvé, RoHS conforme

Spécifications

Dimensions

Hauteur assemblé (en pouces)
2.8
Hauteur de l’emballage (en pouces)
5
Largeur assemblée (en pouces)
5.8
Largeur de l’emballage (en pouces)
7.9
Poids assemblé (en livres)
4
Poids de l’emballage (en livres)
5
Profondeur assemblé (en pouces)
11.25
Profondeur de l’emballage (en pouces)
14

Détails

Longueur des câbles (en pi)
Moins de 5 pi
Pays d'origine
CN-China
Puissance de démarrage (en W)
2000 - 3000
Puissance de fonctionnement (en W)
1000 - 2000
Source d'énergie
À piles
Système de batteries
12 volts CC
Type de montage
Autoportant

Garanties et certifications

1 an de garantie
1100 Watt 12V CC à 120V CA OnduleurPower Bright 1100 Watt 12V CC à 120V CA OnduleurPowerBright PW1100-12 Onduleur de puissance à onde modifiée de 1100 watts à 12 volts CC à CA. Obtenez le pouvoir sous tension! Cet onduleur robuste se connecte directement à la batterie avec les câbles fournis pour alimenter les ordinateurs portables, les téléviseurs, les consoles de jeu et autres appareils électroniques et petits appareils de votre véhicule ou de votre domicile!
Power Bright
1001281873
CAD1472024-02-29
Home Depot Canada
1100 Watt 12V CC à 120V CA Onduleur est évalué 3.9 de 5 de 53.
  • y_2024, m_2, d_28, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_51
  • loc_fr_CA, sid_1001281873, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 77ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par fills a niche perfectly between economy and high performance Purchased to use small home appliances while camping. So, far have used 1500 watt blender. The wattage gauge tells you exactly what it is doing. Making a fruit smoothie without ice, it fluctuates predictably between 700 and 900 watts. The fluctuation and only one group 24, 550 amp hour battery caused me to have to run the engine to prevent low voltage shut off. Not a problem with something that only takes a couple minutes. Have plans for 1000 watt hot plate or 450 watt rice cooker but have not tried yet. Suspect might need 2nd battery in many situations. However, forget and leave it on with no load on it, it only uses a tenth of a volt all day.
Date de publication: 2014-02-25
Rated 4 de 5 de par Great for remote barn site. Ive only had it up for a week but works good so far. Im in Texas so we have plenty of sun. I have one 100 Watt Grape solar panel hooked up. I started with 12.9 volts on battery and leave invertor on 24/7. I have noticed that the input voltage from battery and solar panel is down to 11.4 volts in the morning. Still monitoring to see if I will need another panel. I do have two floresent lights (4x32w bulbs) and two 60 watt lights hooked up so far.
Date de publication: 2012-08-28
Rated 4 de 5 de par Good value So far I've not had this long enough to tell how it will last in the long run, nor have a tested the efficiency vs. others, since this is the only inverter I have, but I did test it with different load while hooked up to a deep cycle battery, and it performed as expected. I think the price is right and the built quality of the unit that I got seems to be good. It's not super light, but I don't expect it to be. So far I'm happy with this inverter and I think it provides good value.
Date de publication: 2014-02-18
Rated 2 de 5 de par well made but not work I purchased this inverter mainly for my 650w microwave oven to heat up my leftover for lunch. I had it hook up to a large deep cycle battery with gauge 4 cable which also hooked up to the truck's battery, It displayed 12.7v on the build in meter, I was able to turn on the oven for the 1st day that I tried it out but the next day the oven stop in the mid way and the 3rd day . the oven would not start at all, The inverter took more than 45amp when it worked with the truck engine running . it displayed 680w on the display.. I than changed a new battery, same thing, the oven had power but it would not turn on .well, it is a nice made unit but it has to go back to Homedepot .too bad. The return experience was good. I think it is nice to purchase from Homedepot online it was simple and easy.
Date de publication: 2013-03-21
Rated 5 de 5 de par Motorhome T.V. use So far so good. Able to watch T.V. after hours when my generator cant not be used in camp ground after Quiet hours. No problum to run Sat. Dish, Two T.V. and dvd player.
Date de publication: 2012-08-21
Rated 5 de 5 de par As advertised Nice that it came with battery cables as many of inverters require separate purchase of cables. Powered cable modem, router, and lcd tv without incident.
Date de publication: 2013-01-02
Rated 5 de 5 de par Tricky setup-great product using this inverter with the engine running to power a smart charger for my 2 agm 12v deep cycle house batteries and a 1000 watt hot plate for car camping. have an 8 foot run of 4 gauge cable from the car battery to the inverter on the floor under the dash with a 200 amp anl fuse within 6 inches of the battery and a cut-off switch on the positive cable. the charger uses max 7 amps 120 vac and runs great-no problems. the hot plate ( 8.33 amps,120vac) runs on low temp setting but med and high cause the inverter to begin beeping and will shut down after a few minutes . however, the inverter works great on all levels of heat if i use the 3 foot 8 gauge cables directly connected to the house batteries. Seems i should have run 2 gauge cable to overcome the resistance present in my cable system. The inverter is a great product though. setting it up properly to work for your particular application will most likely be the tricky part.
Date de publication: 2013-08-05
Rated 2 de 5 de par incomplete rated for 1100 watts. Works fine at approx 500 watts. I haven't put it through it's paces yet. The battery cables are too short. The instructions say to install a switch on the positive connection to the battery and to ground the unit to the chassis of the vehicle. If that was to be done the switch and the grounding cable and clamp should have been included. They weren't. And it wasn't an oversight because the packaging list did not list them. At $80 (before tax) the price seemed good until I found a 2000 watt inverter at Harbor Freight for only 25% more money.
Date de publication: 2015-06-11
  • y_2024, m_2, d_28, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_51
  • loc_fr_CA, sid_1001281873, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 52ms
  • REVIEWS, PRODUCT

Could I have it always hook up to truck battery?and not have it drain batt? If in off mode? I want to mount in truck cab

To charge my makita battery's..
Posée par: andrew
The inverter will draw current whenever it is connected to 12 volts. It will eventually drain your battery. If you have a load on the inverter, the size of the load will determine the length of time it takes to drain the battery. brian
Répondue par: edwlin
Date de publication: 2023-05-04

Portable power supply. Question below

Can I plug in a small computer and have this unit power it. How many AC outlets does it have. How do I charge this unit and how long does power last.
Posée par: Eddie
Go to the manufacturer's website, and at the top click on the tab that says "Videos" ... there are videos that do a great job of not only describing the various sizes/power ratings offered, but they will list all the various things each of their inverters could power ... this way you will know if the one you think you want could power what you think you might like to use I for ... great info in.\ their short videos!
Répondue par: George
Date de publication: 2020-06-18

Is this a pure sine wave inverter?

Posée par: Scott
No.
Répondue par: icu812
Date de publication: 2023-05-04

is this pure sin wave or modified sin wave?

Posée par: lagggtastic
This is a modified sine wave
Répondue par: Addison
Date de publication: 2023-05-07

When I checked output voltage, it is 90 vac, not 120 vac, is that ok, if it is why?

Posée par: Jim
If you measured without a load, it may be 90 vac. It should be 110 to 120 volts with the rated load. You should measure it with the rated load to be sure. 90 vac is Ok no load. brian
Répondue par: edwlin
Date de publication: 2023-05-04

Can I use it for my sump pump?

I need a back up for Sump Pumps during power outages at several properties. I was thinking of a deep cell battery in the basement and connecting the Inverter to the battery. If a power failure happens, the tenant is instructed to plug the sump pump into the Inverter. I realize I can purchase a Sump Pump back up kit or a gas generator, however this seems to solve the issue. I would purchase 3 Inverters and perhaps a stronger model. This is not a money issue so I would appreciate your recommendation. Am I wrong? Please advise. Joe
Posée par: Joe
We would need more information about your sump pump to recommend the appropriate inverter such as wattage or amperage, input voltage etc. Please call us at 866.295.6775 9am - 5pm EST. A pump would have a high startup surge effectively doubling (or more) the rated wattage on the pump. The PW1100-12 would probably be too small for this application.
Répondue par: Technical Support
Date de publication: 2023-05-03

Can this be used in a solar application?

Posée par: Nick
Yes, to make AC power from batteries. You need to buy a separate charge controller to connect the solar panels to the batteries. This is not a grid tie inverter.
Répondue par: repairperson
Date de publication: 2023-05-05

Will this inverter power a 1000 Watt construction light?

Will this inverter power a 1000 Watt construction light?
Posée par: JAYKUS
It probably would. Incandescent lights can have rather large start up surge that is very brief. It can trip the short circuit overload on some inverters if it exceeds the surge capacity. This unit has 2200W of surge for about 0.3 seconds but the light may exceed 2200W. This is what the soft start feature is for, so you need an inverter with soft start. According to my repair notes this inverter does a slow turn on soft start only after being turned on. So you would need to turn the lights on using the switch on the inverter to make use of soft start. The soft start reduces the duty cycle of the output which works for inductive loads like motors but not necessarily as well for regular loads like lights. I also remember the short circuit trip (the instantaneous shut off) being set rather low so maybe this type of soft start wouldn't help as much.
Répondue par: repairperson
Date de publication: 2023-05-04
  • y_2024, m_2, d_28, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_30
  • loc_fr_CA, sid_1001281873, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 81ms
  • QUESTIONS, PRODUCT