Le Vendredi fou du printemps des Pros est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # U 9950 Internet # 1000796266

Cette serrure à tiroir et armoire est faite de composants moulés sous pression et en acier avec un fini en acier inoxydable. Elle comporte un barillet d'un diamètre extérieur de 19 mm (3/4 po) et d'une longueur de 35 mm (1-3/8 po) pour des panneaux d'une épaisseur de jusqu'à 25,4 mm (1 po). Elle peut être montée sur du métal ou du bois et sur des panneaux de porte et/ou de tiroir, et elle comprend 3 cames, un panneau de garniture, 2 rondelles à rotation réversible, 2 clés et des fixations. Ces serrures ont des clés différentes et utilisent l'entrée de clé Yale Y-11. D'autres ont utilisé cette serrure pour remplacer des serrures endommagées dans les boîtes à outils des camions de travail et les machines à boules de gomme.

  1. Les composants de cette serrure à tiroir et armoire sont faits de matériaux moulés sous pression, en laiton, en acier et en acier estampé.
  1. Les composants en acier ont un fini zingué résistant à la corrosion et la face du barillet présente un fini en acier inoxydable.
  1. Conçu pour les armoires à tiroirs et les portes d'armoires
  1. Comprend une sélection de cames de blocage et deux anneaux de rotation
  1. Pour plus de renseignements sur les dimensions et les spécifications, veuillez consulter le dessin au trait.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
0.95
Hauteur de l’emballage (en pouces)
5.35
Largeur assemblée (en pouces)
2
Largeur de l’emballage (en pouces)
3.75
Poids assemblé (en livres)
0.14
Poids de l’emballage (en livres)
0.27
Profondeur assemblé (en pouces)
1.3
Profondeur de l’emballage (en pouces)
1.2

Détails

Caractéristiques
Attaches incluses
Fini de la quincaillerie
Acier inoxydable
Matériau
Composite
Pays d'origine
US-United States
Quantité par paquet
1
Type de produit
Serrures et loquets

Garanties et certifications

Les produits sont garantis contre les défauts de fabrication pendant 1 an. Prime-Line n'est en aucun cas responsable des dommages liés à l'utilisateur ou des dommages subis lors de l'installation. La garantie est nulle si les produits sont soumis à des conditions anormales, à une mauvaise utilisation ou à un mauvais traitement.
Serrure à tiroir et armoire, 1-3/8 po, moulée sous pression, acier inoxydable, panneaux de 1 po maxPrime-Line Serrure à tiroir et armoire, 1-3/8 po, moulée sous pression, acier inoxydable, panneaux de 1 po maxCette serrure à tiroir et armoire est faite de composants moulés sous pression et en acier avec un fini en acier inoxydable. Elle comporte un barillet d'un diamètre extérieur de 19 mm (3/4 po) et d'une longueur de 35 mm (1-3/8 po) pour des panneaux d'une épaisseur de jusqu'à 25,4 mm (1 po). Elle peut être montée sur du métal ou du bois et sur des panneaux de porte et/ou de tiroir, et elle comprend 3 cames, un panneau de garniture, 2 rondelles à rotation réversible, 2 clés et des fixations. Ces serrures ont des clés différentes et utilisent l'entrée de clé Yale Y-11. D'autres ont utilisé cette serrure pour remplacer des serrures endommagées dans les boîtes à outils des camions de travail et les machines à boules de gomme.
Prime-Line
1000796266
Serrure à tiroir et armoire, 1-3/8 po, moulée sous pression, acier inoxydable, panneaux de 1 po max est évalué 4.4 de 5 de 143.
  • y_2024, m_4, d_22, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_28, tr_115
  • loc_fr_CA, sid_1000796266, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 100ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par This is actually the second time I had to buy this exact lock. I didn't take the time to install ... This is actually the second time I had to buy this exact lock. I didn't take the time to install the original one correctly so it needed to be replaced. I took the time to slightly modify the whole in the drawer to properly install this lock. Even improperly installed this lock lasted 2-3 years. The lock still worked but the threads on the cylinder had been damaged due to improper installation and it wouldn't tighten down to keep the cylinder solid in the whole. The lock is good quality for the price and if it is properly installed it should last a long time.
Date de publication: 2018-09-11
Rated 1 de 5 de par nut did not fit lock body threading, It broke the first day in service The body of this lock was threaded to receive a mounting nut which fit very loosly. This lock broke the first day of service and has been removed. I will not be purchasing any more locks from Defender Security.
Date de publication: 2012-04-04
Rated 5 de 5 de par Worked EXACTLY as I had hoped. Used to lock up some base cabinets in my kitchen. In my case, I ... Worked EXACTLY as I had hoped. Used to lock up some base cabinets in my kitchen. In my case, I had to use the offset cam. Everything and I mean EVERYTHING is included with this lockset. Word of caution... make sure if you want them all keyed alike, that you look closely on the back of the packages to make sure you get the same "key number".
Date de publication: 2018-01-27
Rated 4 de 5 de par I had to install a number of these locks and they did the job that a lock of this type should do.... I had to install a number of these locks and they did the job that a lock of this type should do. I also utilized the various locking arms as the situation of thickness of the cabinet and position of the lock varied. There are 2 things in my mind that kept this from being a 5 star. 1, there was no provision to get a number of locks keyed the same and 2 it is almost impossible to hold the tumbler in place and the stop ring then the locking bar and finally the screw with the star washer on it at the same time. I ended up putting a piece of duct tape over the end of the tumbler to hold it in and keep it from moving, then I magnetized the stop ring and locking bar to keep these together when I put them on the end of the tumbler and then gently started the screw with the washer on it.
Date de publication: 2021-03-18
Rated 5 de 5 de par I bought this to add a lock to an oak ( that I painted black as part of this project) filing cab... I bought this to add a lock to an oak ( that I painted black as part of this project) filing cabinet that I had. It worked perfectly. The locked include several different pieces that helped to adapt it to many different install situations
Date de publication: 2019-02-02
Rated 2 de 5 de par The threads on the outside of the cylinder stripped. I wasn't able to tighten the nut enough to ... The threads on the outside of the cylinder stripped. I wasn't able to tighten the nut enough to sink the spikes of the retaining ring fully into the wood. Overall, the manufacturing is very cheap.
Date de publication: 2017-02-25
Rated 3 de 5 de par works Good Works good and easy to install. Have to watch how tight you tighten it though cause threads and nut arent very good and strips easy. Had to go by a new nut at hardware store.
Date de publication: 2017-03-14
Rated 5 de 5 de par worked in replacing the locks on my boat for the rod storage and jacket storage. Will probably b... worked in replacing the locks on my boat for the rod storage and jacket storage. Will probably buy a new lock to go on my mailbox.
Date de publication: 2016-11-08
  • y_2024, m_4, d_22, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_28, tr_115
  • loc_fr_CA, sid_1000796266, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 53ms
  • REVIEWS, PRODUCT

can i buy 7 of them that are keyed the same

Posée par: team
Yes, but you'll probably have to special order. You can look at the inventory at your store, the key number is on the face of the plastic packaging. My store did not have 4 in stock. I'm on hold now with other stores to see if they have any.
Répondue par: Topher
Date de publication: 2023-05-04

how do I know which inch I need

how do I know which inch I need
Posée par: Jones
The length of the cylinder is dependant on the thickness of your cabinet door and the cabinet face. Add the thickness of the door plus the thickness of the face frame of your cabinet. This particular lock is for cabinets that have 3/4" thick doors and about 3/4" thick face frames. There are other models for flush door cabinets and thinner cabinet doors.
Répondue par: Topher
Date de publication: 2023-05-04

do you have the lock with stainless finish

need for boat compartment use and no rust finish
Posée par: retired2500
Yes, but it is not carried in the store.You have to order.
Répondue par: John
Date de publication: 2023-05-03

Do you have this lock for a 3/4 inch hole with a shaft that is one and one half inches long?

Posée par: Marcie
The 3/4 inch hole only comes in a 1.25 inch long
Répondue par: Fixityourself
Date de publication: 2023-05-04

What is the maximum panel thickness for this lock?

Posée par: Kim
Thank you for your inquiry regarding this item from Prime-Line Products. This item can fit up to 1" thick door panel. You can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at info@primeline.net.
Répondue par: primelineProductExpert
Date de publication: 2023-05-06

How long are the latches? I need a 2 inch straight latch

Posée par: Bill
it comes with 3 different latches, 1 is a little over 2 inches, it can be cut to fit.
Répondue par: John
Date de publication: 2023-05-03

Can these be used on cupboard doors that are 3/4 inches thick? The smaller size (1-1/8 inch) is out of stock.

Posée par: qwerty
Thank you for your inquiry regarding this item from Prime-Line Products. This item could be used but may will leave a slight gap not letting cabinet door be fully closed. The smaller size (13/16") is U 9945 which can be ordered online and is in stock.
Répondue par: primelineProductExpert
Date de publication: 2023-05-07

We have locks------but a dingbat lost all the keys---the locks are numberad can we get keys

Posée par: louy
Thank you for your inquiry regarding this item from Prime-Line Products. Prime-Line does not have pre-cut or blanks for any drawer cabinet locks. Please find a local locksmith to assist you.
Répondue par: primelineProductExpert
Date de publication: 2023-12-13
  • y_2024, m_4, d_22, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_fr_CA, sid_1000796266, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT