Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Aperçu

Modèle # BPCK Internet # 1000731813

La trousse délimination des charpies pour la sécheuse ProClean aidera votre sécheuse à fonctionner de façon sécuritaire et efficace. Cette trousse contribue à réduire la durée du séchage et à améliorer le rendement de la sécheuse. Elle réduit également le risque dincendie dans lévent de la sécheuse en enlevant la charpie accumulée dans toutes les sections de la sécheuse et de la conduite.

  1. Inclut 3 pièces faciles à utiliser
  1. La brosse de 10 pi pour conduite de sécheuse enlève la charpie qui saccumule à lintérieur de la conduite
  1. La brosse de 36 po pour filtre à charpie aide à nettoyer en profondeur le filtre à charpie de la sécheuse
  1. Laccessoire pour tuyau daspirateur nettoie le filtre à charpie de la sécheuse, ainsi que la charpie et la poussière qui saccumulent sous la sécheuse et autour delle

Spécifications

Dimensions

Hauteur assemblé (en pouces)
11
Hauteur de l’emballage (en pouces)
10.8
Largeur assemblée (en pouces)
11
Largeur de l’emballage (en pouces)
10.8
Poids assemblé (en livres)
1.52
Poids de l’emballage (en livres)
1.7
Profondeur assemblé (en pouces)
4.38
Profondeur de l’emballage (en pouces)
4.38

Détails

Pays d'origine
CA-Canada

Garanties et certifications

Toute la marchandise est garantie contre les défauts matériels et la fabrication pendant un an à partir de la date d'achat. Cela inclut l'usure normale et le manque de performance sur les articles. Le fabricant s'engage à remplacer ou réparer à leur gré.
Ensemble d'élimination de la charpie dans la sécheuseProClean Ensemble d'élimination de la charpie dans la sécheuseLa trousse délimination des charpies pour la sécheuse ProClean aidera votre sécheuse à fonctionner de façon sécuritaire et efficace. Cette trousse contribue à réduire la durée du séchage et à améliorer le rendement de la sécheuse. Elle réduit également le risque dincendie dans lévent de la sécheuse en enlevant la charpie accumulée dans toutes les sections de la sécheuse et de la conduite.
ProClean
1000731813
Ensemble d'élimination de la charpie dans la sécheuse est évalué 3.6 de 5 de 112.
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_104
  • loc_fr_CA, sid_1000731813, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 54ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par Works Well if used Wisely Purchased the brush system to clean out our dryer vent tubing during a remodel. Small brush worked just fine on the dryer. The round brush used for the vent tubing also worked well, removing a surprising amount of lint. However, be warned that if you twist the brush cable as you insert the brush, ONLY turn it clockwise. Turning it counter-clockwise will unscrew the brush and leave it in the vent tubing as I did. (sigh) After considerable effort, I was able to retrieve it, and learned a valuable lesson. So, put some LocTite on the brush threads before using, or only turn the brush clockwise when inserting or removing it from the tube.
Date de publication: 2013-08-21
Rated 4 de 5 de par Be careful As others have noted, the brush head screws onto the cable attachment. The manufacturer recommends rotating the brush in both directions, which is likely to cause the brush to come off in the vent. If this happens 10 feet into the tube, it's a world of trouble. The advice to use loctite on the brush threads is right on. I removed a substantial amount of lint with this tool. It had enough flexibility to get past the bend at the beginning of my duct setup, but not the 2nd bend in the ceiling. You'll likely have to go at the ductwork from the dryer connection and the exhaust port outside.
Date de publication: 2014-11-02
Rated 5 de 5 de par Did the job. Our dryer vent goes up through our attic and roof. We attempted to get the brush up from the bottom and put it on a drill, which for us didnt work out very well. We had to go up into the attic, remove the top of the vent, and run the brush down wire end first. Once it was to the bottom of the vent, we attached the drill and got the brush part to come down. We were able to pull out a gallon size zip lock bag of dryer lint. This was after we hired someone to do this for us at $80 and they claim they cleaned it out but obviously they didnt. Did the job great and now the dryer works the way its supposed to.
Date de publication: 2012-08-21
Rated 2 de 5 de par Product was useful, after some upgrading Duct brush is loosely screwed on. This is a serious flaw, as brush head can come off-inside the duct. Easy to remedy, by gluing on head. Are you listening Manufacturer? Snorkel tool that attaches to vacuum cleaner is folded so tight, as to render it useless, without remedy by opening and holding at full length, heating and reforming, to open fold creases. Duct brush will not go around corners. Brush shaft is too stiff to bent tightly. Plunging brush is very good. This an inexpensive kit, fair quality, limited usefulness
Date de publication: 2013-07-02
Rated 3 de 5 de par worked fine but brush fell off The brush worked fine, however the brush head fell off quickly and i had to disassemble my dryer vent pipe to retrieve it. I glued the brush back on (not with the cheap glue that it was originally attached with) and it worked fine. If you get this I would recommend that you remove the brush head before you use it, drill out the hole that the arm fits into and re-glue it (I used superglue and that worked well)
Date de publication: 2011-09-20
Rated 1 de 5 de par Looks like it should work, but mine broke. Just had a short 5ft straight section that I stuck the brush in and pulled it out, Then I wanted to run it back in while twisting, and checked the head attachment, because I'd read the head can come off it you twists the wrong way, and the head did come off. In trying to 'screw' it back on, the fitting came out. If I had tried to use anywhere near the whole length of the tool - with any pipe turns - don't think it would work.
Date de publication: 2014-03-04
Rated 3 de 5 de par Wrx great but has a problem The head is not secured and unscrews as you are winding the brush up the vent to clear it out. After hours of trying different ways to get it out, we had a neighbor who had the right tools to blow it out from the top vent. Yahoo!! We used a thread locker on the head and now it works very well. I am so happy I purchased it. Customer service and shipping was very good. Thanks!!!
Date de publication: 2012-11-06
Rated 5 de 5 de par Does what it is supposed to do! I don't know if improvements have been made to the kit, but I did not have any of the issues I have seen in other comments. I wish the brush handle was 15' instead of 10', but I was able to work around the 10' length. I purchased this kit to clean out the dryer vent in my rental house (landlord claimed it was clean, but I was able to pull handfulls of lint where the vent enters the wall). The full run of the vent is 26' with three 90 degree elbows. I only turned the vent brush clockwise on the assumption that turning it counter clockwise might cause the brush head to unscrew. I was able to make it through the elbows by putting a slight bend on the wire just after the brush head, then pushed/pulled the handle while rotating the brush clockwise, this got past all of the elbows. I used the brush from both ends of the vent, pushing the brush in as far as I could shove my arm into the vent (this left a couple of feet of vent that I couldn't reach). I also purchased a 30' piece of 1/8" cable. By attaching a couple of supermarket shopping bags to the cable, I was able to blow the cable through the vent with my shop vac. I then attached the cable to the end of the brush handle and pulled the brush all the way through the 26' vent (and repeated this twice). My shopvac (5 gallon capacity) was about half full of lint when I was finished cleaning the vent. Vacuum attachment was too small to fit on my vacuum so I put a couple of turns of duct tape over the end of the attachment until it would slide snugly into my vacuum tub. I used the attachment to clean my dryer through the lint trap, and to clean out the A/C vents at the registers in my house. I haven't used the "bottle brush" at all, I was able to clean everything I needed to with the vent brush and vacuum attachment.
Date de publication: 2015-02-02
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_104
  • loc_fr_CA, sid_1000731813, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT

Can be attached to a drill

Posée par: Gee
No, not mine anyway.
Répondue par: bigbarthy
Date de publication: 2017-09-20

How long is the reach of this brush?

Posée par: willi
Short pointed brush = 3' Long round brush = 10'
Répondue par: Buck
Date de publication: 2018-03-01

can i use this on flexible dryer hose and will it make a 90 degree turn

Posée par: helpfrank
Yes. The brush shaft is very flexible and your can also insert the brush through the vent duct cap.
Répondue par: Charlie
Date de publication: 2018-03-01

can i attach two lengths together or can i attach a snake/fishwire to the end

Posée par: tim
You can attach an additional flexible fish tape or shaft to the brush. Just make sure where you make the attachment is a secure connection and one that will allow the tool to still make a 90 degree turn freely. You don't want to have to "fish" a tool out of the duct.
Répondue par: Charlie
Date de publication: 2018-03-01

Brush Diameter

What is the diameter of the brush? Some of these seem too small for the dryer vent hose or the duct up the wall.
Posée par: NeedInfo
The brush head is 4" in diameter. This should also be the same diameter as your dryer duct.
Répondue par: Dryer Venting Educators
Date de publication: 2016-08-20

is this tool capable of pushing a Bird's Nest out of an overhead Exhaust Vent?

Posée par: UghBirds
The results would depend on where the bird's nest is situated inside the duct, how large it is, etc. For increased power, ensure the brush kit is attached to a drill and not used manually.
Répondue par: Dryer Venting Educators
Date de publication: 2016-04-13
  • y_2022, m_9, d_28, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_fr_CA, sid_1000731813, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 54ms
  • QUESTIONS, PRODUCT