Veuillez attendre de recevoir un courriel indiquant que votre commande est prête à être ramassée avant de vous rendre au magasin.  En savoir plus

Pylex Support de patio ajustable 6x6

Modèle nº 12097|Nº UGS 1000746288

Aperçu

Modèle # 12097 Internet # 1000746288

Ce support ajustable est conçu pour soutenir solidement votre patio. Il facilite la mise au niveau du plancher durant sa construction ou son réajustement à la suite des mouvements du sol (gel, dégel). Une solution fiable et performante! Sa structure en acier procure une grande résistance et solidité, et ne nécessite aucun entretien. Il sinstalle simplement dans un bloc d'appui en béton ou un sonotube de béton. Complètement réversible : faites basculer la base de 180 degrés.

  1. Pour recevoir un poteau fini 6 x 6
  1. Peut supporter jusqu'à 2725 lbs de charge
  1. Degré d'ajustement approximatif de 3 pouces sur la hauteur
  1. Réversible pour utilisation avec un bloc-patio ou encore dans un sonotube de béton
  1. Fini de peinture en poudre cuite offrant une excellente résistance à la rouille

Spécifications

Dimensions

Hauteur assemblé
11
Hauteur de l’emballage (en pouces)
5
Largeur assemblée
5
Largeur de l’emballage (en pouces)
6
Poids assemblé
3.75
Poids de l’emballage (en livres)
3.7
Profondeur assemblé
6
Profondeur de l’emballage (en pouces)
11

Détails

Certifié
Non
Famille de couleurs
Noir
Matériau
Acier
Pays d'origine
CN-China

Garanties et certifications

Garantie de satisfaction de 5 ans, pour plus d'information visitez www.pylex.com
Support de patio ajustable 6x6Pylex Support de patio ajustable 6x6Ce support ajustable est conçu pour soutenir solidement votre patio. Il facilite la mise au niveau du plancher durant sa construction ou son réajustement à la suite des mouvements du sol (gel, dégel). Une solution fiable et performante! Sa structure en acier procure une grande résistance et solidité, et ne nécessite aucun entretien. Il sinstalle simplement dans un bloc d'appui en béton ou un sonotube de béton. Complètement réversible : faites basculer la base de 180 degrés.
Pylex
1000746288
Support de patio ajustable 6x6 est évalué 4.5 de 5 de 20.
  • y_2021, m_1, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_13, tr_7
  • loc_fr_CA, sid_1000746288, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 77ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Excellente product Good quality, good option, it was very useful on my backyard project
Date de publication: 2020-09-24
Rated 5 de 5 de par Good choice Excellent product and good quality Excellent product and good quality 100 percent recommended
Date de publication: 2020-09-11
Rated 5 de 5 de par Product quality matched expectations quick uneventful delivery, easy order process, quality matched expectations
Date de publication: 2020-08-21
Rated 5 de 5 de par Great Easy to use, made a deck for my spa that was attached to my existing deck, the adjustable option made it easy to level
Date de publication: 2020-08-12
Rated 5 de 5 de par Easy to install, slightly wider that real wood Good quality and easy to install. I replaced some posts on my deck since it was sinking slightly. I love that these are adjustable even after they're already installed. Note that it's slightly larger than an actual 6x6 post so when you screw them into the wood it bends inward. If installing with cinder blocks, make sure you secure it down with bolts
Date de publication: 2019-07-04
Rated 4 de 5 de par NICE PRODUCT,EASY TO USE I've used that item and found it really easy to use and not expensive; Be sure to read the product description to avoid the same ''problem''then that girl seem to have with this one ..... It's for a DRESSED post 6 x6 , I've use it with dressed post and it's fits like a glove , the adjustable nut permit to level it if I need to !! Thank you , like it
Date de publication: 2015-08-12
Rated 1 de 5 de par Wrong Advertised Size I bought these to fit 6x6 posts, when we measured they are actually 5 1/2 x 5 1/2. Had to make them fit because they were a special order. Now have to buy post covers because they look horrible.
Date de publication: 2014-09-12
  • y_2021, m_1, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_13, tr_7
  • loc_fr_CA, sid_1000746288, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 26ms
  • REVIEWS, PRODUCT

Can this be used in conjunction with the Pylex 50" support screw model #10555, for using 6x6 posts instead of the 4x4 posts?

Posée par: silverbullet
Hello Sir, Absolutely, this is what we recommand to have an 6x6 saddle, you will still need the 4x4 saddle for the installation. Anything else, please let us know. Thanks
Répondue par: Pylex Customer Services
Date de publication: 2020-06-26

I tried installing these but didnt feel they were sturdy as it just inserts into the bottom base loosely. I didnt have any load other than the beam but didnt think they would work on a floating deck next to a pool.

Posée par: Robbiedoggie
My deck was hinged one side to building. But  for install you should have a solid level base with a 4’x4’x2” or 4” (heavy duty) patio slab then place a patio block support with the adjustable inserted up to your deck beam and fastened. You will want to set the height so that you will be able to adjust to your likely season changes. Extended if height likely needs reducing at that time. Retracted if it likely needs to be raised. Mid if adjustment is minimal. I needed them cause, I had to manually jack up and re-level all the patio slabs every spring (very tedious).  The deck should not sway if properly levelled and supported. I believe the maximum total adjustment was 5-7 “from low to high. Hope this helps
Répondue par: Kris
Date de publication: 2020-05-31

What are the exact dimensions of the U bracket? Is it actually 6"x"6?

Posée par: Newbe
Hello Sir, They are made to fit a 6 X 6 post that is actual size 5 1/2 x 5 1/2. Anything else, please let us know. Thanks
Répondue par: Pylex Customer Services
Date de publication: 2020-05-04

I asked this question recently, and only got a partial answer: What is the outside diameter of the tube that the screw fits into, and what is the diameter and the thread pitch (the number of threads per inch) of the adjusting screw? Please help

Posée par: Hunter
Hello Sir, The outside diameter of the tube is 1 inch. The diameter of the adjusting screw is ¾ inch. The adjusting screw thread pitch is 10 threads per inch. Anything else, please let us know. Thanks
Répondue par: Pylex Customer Services
Date de publication: 2019-07-17

What is the screw Dia. And pitch, and what is the Dia. of the post?

Posée par: Hunter
Hello Sir, The diameter of the screw if 3/4". Unfortunately I don't understand what you want to know by pitch ? This product is made to received an 6x6 nominal post ( 5.5" x 5.5" real size) Anything else, please let us know. Thanks
Répondue par: Pylex Customer Services
Date de publication: 2018-03-26

Hi. Would it be OK if I set the unit before the concrete sets using maybe using 8 or 10" spikes as opposed to using Tap-con screws after the concrete has set? We're setting up a fairly heavy sign on two 6x6 posts.

Posée par: Tbear
Hello, I would like to ask you more questions to answer your questions. Is it possible for you to send an email to info@pylex.com, I will get back to you with questions as soon as I get your email. Anything else, please let me know. Thanks
Répondue par: Pylex Customer Services
Date de publication: 2020-05-15

When using these with deck blocks, are the bottom of these supports supposed to be screwed into the deck block? Will this not reduce the structural integrity of the deck block, especially since all deck blocks have a hole in the middle? Please advise

Posée par: Teredactle
Hello Sir, If you deck is attach to your house, it is not necessary to screwed them in the deck block. However if it is a floating deck, the deck block will not crack if you make a proper holes prior using tapcon screws. I would recommand to follow the screw manufacturer (tapcon or others) recommandation on that matter. Anything else, please let us know. Thanks
Répondue par: Pylex Customer Services
Date de publication: 2020-05-14

I see in the drawing that the holes are 5/16". What type of fastener hardware is recommended for 6 x 6 posts?

Posée par: mwashburn
Hello Sir, We recommand to use ¼" x 1.5" or 2" Lag screws. Anything else, please let us know. Thanks
Répondue par: Pylex Customer Services
Date de publication: 2020-05-14
  • y_2021, m_1, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_fr_CA, sid_1000746288, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 77ms
  • QUESTIONS, PRODUCT