Le Vendredi fou du printemps des Pros est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # 10321 Internet # 1001011210

Les cales fer à cheval de QEP sont le choix idéal pour espacer et aligner le marbre, le granite, la pierre et les carreaux de grands formats. Les cales fer à cheval ont une excellente réputation pour espacer et aligner les carreaux horizontaux et verticaux rapidement et facilement. Les cales fer à cheval de QEP sont moulées par injection pour garantir une grande précision dimensionnelle et ne se compresseront pas sous les charges lourdes, ce qui les rend particulièrement utiles dans les installations verticales. Les cales fer à cheval de QEP sont réutilisables et sont emballées dans un seau pratique et réutilisable.

  1. Idéal pour espacer et aligner le marbre, le granite, la porcelaine et les carreaux de grand format
  1. Les cales fer à cheval ne s'écrasent pas sous des charges lourdes, ce qui les rend idéales à utiliser sur les carreaux lourds et elles niveleront les carreaux muraux
  1. Les cales réutilisables sont faciles à manipuler et à retirer une fois que les carreaux sont posés
  1. Aligne facilement les joints de coulis en plaçant chaque pointe de cale sous les coins adjacents
  1. Le codage par couleur facilite l'identification des tailles

Spécifications

Dimensions

Hauteur assemblé (en pouces)
5.5
Hauteur de l’emballage (en pouces)
4.75
Largeur assemblée (en pouces)
12
Largeur de l’emballage (en pouces)
5.5
Poids assemblé (en livres)
9.3
Poids de l’emballage (en livres)
1.45
Profondeur assemblé (en pouces)
14.5
Profondeur de l’emballage (en pouces)
5.5

Détails

Matériau
Plastique
Pays d'origine
CN-China
À utiliser avec
Carreaux de porcelaine

Garanties et certifications

Être exempt de défauts de fabrication
Cales d'espacement de 1/8 po pour marbre, granit et pierre, installations au sol ou au mur (150)QEP Cales d'espacement de 1/8 po pour marbre, granit et pierre, installations au sol ou au mur (150)Les cales fer à cheval de QEP sont le choix idéal pour espacer et aligner le marbre, le granite, la pierre et les carreaux de grands formats. Les cales fer à cheval ont une excellente réputation pour espacer et aligner les carreaux horizontaux et verticaux rapidement et facilement. Les cales fer à cheval de QEP sont moulées par injection pour garantir une grande précision dimensionnelle et ne se compresseront pas sous les charges lourdes, ce qui les rend particulièrement utiles dans les installations verticales. Les cales fer à cheval de QEP sont réutilisables et sont emballées dans un seau pratique et réutilisable.
QEP
1001011210
Cales d'espacement de 1/8 po pour marbre, granit et pierre, installations au sol ou au mur (150) est évalué 4.6 de 5 de 69.
  • y_2024, m_4, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_25, tr_44
  • loc_fr_CA, sid_1001011210, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 70ms
  • REVIEWS, PRODUCT
Rated 3 de 5 de par wrong size - much bigger than crosses I bought this in the 1/8" size because that's what my cross spacers were sized at and they ran out of those when I went to pick up more. Try these out in store before bringing them home. I have a 1"x1" mosaic square tile but can't get these between the tiles on the sheet. The 1/16" acts more like the 1/8" at least for my mosaic tiles. For bigger tiles you probably won't notice this, but since I'm trying to space some cut tile sheets it makes quite a big difference. I like them for ease of use between the tile sheets but probably wouldn't recommend for mosaic tiles. Try these out with tile in store before buying to ensure correct size and would not recommend buying online because of this
Date de publication: 2020-12-09
Rated 5 de 5 de par I set tile for a living and use then every... I set tile for a living and use then every day just don’t know why the don’t have them in the store in Montgomeryville store !chuckle tiles
Date de publication: 2020-02-19
Rated 4 de 5 de par Worked well as long as we inserted the U shape into the space with the open end facing inward. We... Worked well as long as we inserted the U shape into the space with the open end facing inward. We inserted some of tje s[acers sideways, into a mastic adhesive, for my back splash. After adhesive cured for a day or two, the sideways inserted spacers were nearly impossible to remove. I sprayed them with water, waited a five minutes, then forcefully removed them. Despite the amount of force needed, all of the stuck spacers came out intact! Overall all the tile spacers work well and are easier to handle than smaller spacers. They met most of my expectations. I would give them 5 stars if they did not get stuck. These spacers are more costly compared to other products on the market. However, they seem to be reusable!. The result turned out very nice. My tiles are 3 x 12, however, their actual dimension is 1/8 inch less on the top and side which allow for the 1/8 inch grout lines, and minimized the number of horizontal cuts needed. We used Custom Building Products Mastic Universal adhesive and Bostik's sanded grout in a color named shadow (which is grey).
Date de publication: 2018-10-26
Rated 5 de 5 de par I have used these for years. The great part... I have used these for years. The great part about them is that they are made of hard plastic so the grout joints stay consistent regardless of the weight of the tile. They are also much easier to remove once tiles are set.
Date de publication: 2019-07-30
Rated 4 de 5 de par these are so much better than the little stars. Sadly... these are so much better than the little stars. Sadly the mold release tab is in the grout line and should be 1/2 inch or higher above the tip of horseshoe. These are so much easier to remove from hardened thin set
Date de publication: 2023-06-21
Rated 5 de 5 de par These work very well. Use some painters' tape to hold... These work very well. Use some painters' tape to hold them vertically if needed. I would recommend getting some smaller shims in case your tile are not of perfectly matching sizes.
Date de publication: 2017-10-24
Rated 5 de 5 de par After using the white cross looking things I absolutely love these things. Durable and easy to see and use. Can be used to clean out grout lines also on the go
Date de publication: 2024-03-21
Rated 3 de 5 de par I did not like this product,the slick finish made them constantly fall down. I would prefer woode... I did not like this product,the slick finish made them constantly fall down. I would prefer wooden shims for my next project .
Date de publication: 2019-02-19
  • y_2024, m_4, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_25, tr_44
  • loc_fr_CA, sid_1001011210, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 49ms
  • REVIEWS, PRODUCT

what are the length and width of these shims, obviously they are 1/8' thick

what are the length and width of these shims, obviously they are 1/8' thick
Posée par: HHI
The dimensions of the product are Length 1.91 " x width 1.44 ".
Répondue par: Communityanswer
Date de publication: 2023-05-04

Can they be used for window sill leveling?

Posée par: HomeDepot12
Hi Our Horseshoes Shim Tile Spacers hasn't been test for this application they are designed to be use with flooring only thank you
Répondue par: The Manufacturer
Date de publication: 2023-05-04

Do you have smaller than 1/8?

Posée par: Kat
Thank you for your inquiry. QEP also sells 1/16" Horseshoe Shim Tile Spacers. The item number is 10320Q and is available on Home Depot's website. If you have any further questions please call our Customer Service (866) 435-8665. Thank you for your interest in our product.
Répondue par: The Manufacturer
Date de publication: 2023-05-03

How long I have to wait to remove the Shim from Tiles over thinset mortar ? Thank you.

How long I have to wait to remove the Shim from Tiles over thinset mortar ? Thank you.
Posée par: Mikey
The thinset needs to dry before removing the shims. Customer Care
Répondue par: The Manufacturer
Date de publication: 2023-05-07
  • y_2024, m_4, d_19, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_fr_CA, sid_1001011210, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 75ms
  • QUESTIONS, PRODUCT