En raison de l'augmentation importante du volume des commandes, certaines commandes peuvent être retardées pour la cueillette. Veuillez attendre le courriel indiquant que votre commande est prête à être ramassée avant de vous rendre au magasin.  En savoir plus

Rapid Set Mélange à mortier 55 lb

Modèle nº 12403025|Nº UGS 1000779604

Aperçu

Modèle # 12403025 Internet # 1000779604

Utilisez le Mélange à mortier Rapid Set en format de 55 lb pour vos travaux de réparation et de moulage. Cette formule anti-fissuration sans retrait est conçue pour assurer résistance et durabilité. Elle peut être appliquée sur des surfaces verticales ou au plafond.

  1. Peut couvrir jusquà 0,5 pied cube
  1. Conçu pour linstallation de fenêtres et la réparation du béton, du stuc et des murs
  1. Conçu pour être utilisé à lintérieur et à lextérieur
  1. Peut être appliqué sur des surfaces verticales ou au plafond
  1. Adhère au béton, à la brique, à la pierre ainsi quà plusieurs autres types de surface
  1. Ne nécessite que lajout deau
  1. Atteint sa résistance structurale en 1 heure

Spécifications

Dimensions

Hauteur assemblé (en pouces)
5
Hauteur de l’emballage (en pouces)
18.5
Largeur assemblée (en pouces)
22
Largeur de l’emballage (en pouces)
15.5
Poids assemblé (en livres)
55
Poids de l’emballage (en livres)
55
Profondeur assemblé (en pouces)
14
Profondeur de l’emballage (en pouces)
4.3

Détails

Mélange de types
Recharges pour époussetoir
Pays d'origine
CA-Canada

Garanties et certifications

N/A
Mélange à mortier 55 lbRapid Set Mélange à mortier 55 lbUtilisez le Mélange à mortier Rapid Set en format de 55 lb pour vos travaux de réparation et de moulage. Cette formule anti-fissuration sans retrait est conçue pour assurer résistance et durabilité. Elle peut être appliquée sur des surfaces verticales ou au plafond.
Rapid Set
1000779604
Mélange à mortier 55 lb est évalué 4.4 de 5 de 616.
  • y_2021, m_6, d_17, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_608
  • loc_fr_CA, sid_1000779604, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 103ms
  • REVIEWS, PRODUCT
Rated 2 de 5 de par This product is more for professional persons and not... This product is more for professional persons and not for DIY usage unless we are experts. The setting time is very low and makes it very difficult to get a smooth finish. It starts getting hard in just few mins and very difficult to spread it entirely. I had to struggle to get a uniform smooth finish surface.
Date de publication: 2021-06-09
Rated 5 de 5 de par Excellent product, I was able to repair two columns on... Excellent product, I was able to repair two columns on a second story home, affected by corrosion and earthquake.
Date de publication: 2021-06-09
Rated 5 de 5 de par Rating provided by a verified purchaser... Rating provided by a verified purchaser
Date de publication: 2021-06-02
Rated 5 de 5 de par The Shack and mortar was easy to pick up and... The Shack and mortar was easy to pick up and they work excellent for the job I had for it
Date de publication: 2021-06-01
Rated 5 de 5 de par Rating provided by a verified purchaser... Rating provided by a verified purchaser
Date de publication: 2021-05-18
Rated 5 de 5 de par It dry very quickly. Once settled it look really great... It dry very quickly. Once settled it look really great ! Great buy .
Date de publication: 2021-05-18
Rated 4 de 5 de par When I'm leveling up an Industrial machine up on shims... When I'm leveling up an Industrial machine up on shims and have it bolted onto the Floor, this is what I use to fill in gaps under and around. In the one picture, you can see a little blue. That's from being run into by a CHEP Blue Pallet. It didn't break YET. I had just fixed it as they broke it up about half of that. People like to run into things. This is the second time I've had to fix that one. To get a smooth look, you wet your Metal 3-4" wide knife. Puddy knife or drywall knife. Dip in water and run across. If you want more of a ruff look with the small bits of rock, you and wipe and dap with a sponge. Mine is the smooth look in the picture. The less water you use, the stronger it's going to be. It has to be wet and mixed wet good, but it can't be thin and runny. Just enough so it's all wet, and there is no dry mix left. A little water goes a long way. It is Rapid Set and so you have to use it pretty quickly before it starts drying. Then it's to hard to work with. So you can only do small sections at a time. In my case, mix enough for 1 or 2 Legs. You have maybe 15 minutes to work!!!
Date de publication: 2021-05-17
Rated 2 de 5 de par Frustrating to work with This stuff does not apply smooth. Did not adhere well to concrete wall. Dries really fast right in the bucket. 2 bags were wasted. Would not reccomend.
Date de publication: 2021-05-09
  • y_2021, m_6, d_17, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_608
  • loc_fr_CA, sid_1000779604, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 69ms
  • REVIEWS, PRODUCT

Can I use this Mortar Mix to parge a concrete foundation wall? (I am wondering it it's a type S mortar mix). I like the sand color of the mix, otherwise I would have to add cement color to a gray mix.

Posée par: wern70
I think that that you would be better to tint parging mix. Mortar is stickier and won't float as easily in my opinion.
Répondue par: Peter
Date de publication: 2020-08-19

Can I use this product to install tile with? I have 12 by 24 tile that i would like install in my bathroom floor and wall.

Posée par: vandia
This product is not intended for your specific application. Please consult the flooring or tile department for the correct product to use for your project.
Répondue par: King Packaged Materials
Date de publication: 2019-09-04

Can i use this to build up concrete floor an 1 1/4" and lay tile on it?

Posée par: Craig
I'm not sure about the specific product - brand name - you are inquiring about. Mortar mix is available in different mix designs for specific applications..--- the product that is designed for your specific project is SAKRETE Sand Mix - topping and bedding mix.--- here is the products technical information.------SAKRETE Sand Mix topping and bedding mix is a pre-blended, ready-to-use mixture of Portland cement and well-graded, natural sand. It is designed for new concrete construction projects, concrete overlays and repairs where a thickness of 2 inches (5 cm) or less is required. Can be finished smooth by trowel or textured using a broom or brush. Can be opened to foot traffic in 24 hours. Meets or exceeds strength requirements ASTM C 387 strength requirements. FEATURES & BENEFITS • General purpose applications • Ready-to-use; just add water USES Ideal for thin applications from 1/2 inch (1.3 cm) to 2 inches (5 cm) in thickness. Use for overlaying concrete repairs, filling cracks in concrete, parging and as a base for shower stalls. Can also be used as a bedding mix or joint grout for flagstone, slate, brick walkways and patios. PROCEDURES Mix and substrate temperatures should be maintained between 5 ºC and 30 ºC (40 ºF and 86 ºF) for at least 24 hours prior to and 48 hours after. Surface Preparation: New construction: Prepare the area as required for the project. Repairs: Surfaces to be repaired must be sound and clean. Remove all delaminated or unsound concrete by chipping with a hammer and chisel or using a stiff wire brush. Clean the area to be repaired with potable water, leaving the concrete saturated but free of standing water. Some very porous concretes may require several applications of water to ensure complete saturation. If required, construct forms around the old sidewalk or slab. Use a level to ensure the forms are set at the correct height and there is adequate slope for water drainage For best results, apply SAKRETE Concrete Adhesive to the existing dampened substrate before pouring. Mixing: Empty contents of bag into mortar box, wheelbarrow or mechanical mixer. When mixing by hand form a crater for adding water. Add approximately 4 L (4.25 qts) of clean water per 30 KG (66 lb) bag or enough to achieve a workable mix. Avoid a soupy mix. Excess water reduces strength and durability and can cause cracking. In cold weather, use warm water to accelerate the set. In hot weather, use cold water to slow the set. Placing: After mixing, place and consolidate inside the area. Level, moving a straight-edged board in a sawing motion across SAKRETE Sand Mix, removing any excess and filling low areas. Allow freshly placed material to set or until the surface bleed water evapourates before finishing. Time will vary with weather conditions. Finishing: After bleed water evapourates, finish as desired. It is recommended to use a wood, magnesium or aluminum float trowel for a smooth surface. For a textured surface use a broom or brush. Use an edger tool to fi nish edges. Finishing cementitious materials too early, or over-working the materials can cause dusting, cracking, scaling and a weak surface. NOTE: Stress control joints are placed to control where slabs crack, along a pre-determined path. Use either a hand jointer while the mix is soft or saw cut 6 to 18 hours after hardening. The joint should be 1/5 of the full thickness of the slab and every 8 ft (2.4 m) in both directions. Adjust down for appearances (centering). Should the repair overlay be placed over an existing concrete joint or break, it is important to tool a joint into the soft mix over the existing joint or break. Use a jointer tool to form a joint half the depth of the repair. FILLING CRACKS After mixing, work the SAKRETE Sand Mix into the crack with a rod or stick then level the surface with a straight edge. Finish as desired. CURING Curing means maintaining proper moisture and temperature. Allow newly placed material to set until surface is hard to the touch. SAKRETE Sand Mix will set in approximately 6 hours. Then keep material damp or cover with plastic to prevent evaporation of mix water for at least three (3) days. Protect from freezing for at least 24 hours. Can be opened to foot traffic in 24 hours. TECHNICAL DATA Compressive Strength: 3 Day 15 MPa (2175 psi) 7 Day 20 MPa (2900 psi) 28 Day 35 MPa (5000 psi) Meets or exceeds strength requirements of ASTM C 387 when used as directed. PAINTING Concrete must be fully cured (approximately 28 days) and dry before painting. Refer to paint manufacturer directions for application instructions. YIELD 30 KG (66 lb) yields approximately 0.014 m³ (1/2 ft³). A slab 12 ft² (1.1 m²) at 1/2 inch (1.3 cm) thickness requires 30 KG (66 lb). Slab Calculator (dimensions in feet): 2 inches or less __ Length (ft) x __ Width (ft) x __ Depth (in) = ___ ÷ 12 = ___ ft3 x 2 = ___ 30 KG bags required. Slab Calculator (dimensions in metres): 5 cm or less __ Length (m) x __ Width (m) x __ Depth (cm) = ___ ÷ 100 = ___ m3 ÷ 0.014 =___ 30 KG bags required.
Répondue par: King Packaged Materials
Date de publication: 2020-08-11

I will be putting a layer of Rapid Set Mortar mix on my patio to even it out and fill the cracks (1/4 to 1" wide) (I'll put layer of concrete adhesive before I put Rapid Set Mortar) Will it crack in the winter from cold weather alone? (southern Ontario)

Posée par: MS006
I would recommend using the cement all to repair the cracks. Cement All product can be applied from 0-4" in thickness and holds up extremely well. You can then do an overlay with the mortar mix on your patio to even it out. Both of these products hold up extremely well in freeze thaw cycles, and against sulfate attacks. Thank you for choosing Rapid Set!
Répondue par: King Packaged Materials
Date de publication: 2020-10-04

Can I use this to repair loose coping stones around an inground pool in Canada?

Posée par: Derek
To repair your loose coping stones it is recommended to use 1 of 3 products suggested. 1st option: Compressive Strength: 1 Day 10 MPa (1450 psi) 3 Day 14 MPa (2000 psi) 7 Day 35 MPa (5000 psi) 28 Day 42 MPa (6000 psi) Exceeds strength requirements of ASTM C 387 when used as directed. YIELD 20 KG (44 lb) covers approximately 1.20 m² (13.0 ft²) at 10 mm (3/8 inch) thick. PACKAGING UPC 20 KG (44 lb) bag 055226505129||||| 2nd option: FOR LOAD-BEARING WALLS REQUIRING HIGH COMPRESSIVE STRENGTH. SAKRETE Mortar Mix, Type S should not be used where Type N Mortar is specified. For applications requiring conventional Type N Mortar, please refer to SAKRETE Mortar Mix, Type N. SAKRETE Mortar Mix, Type S is a pre-blended, readyto-use, Type S Mortar specifically designed for use with concrete blocks, hard brick, or stone. This mortar is a blend of cementitious material, masonry sand and other carefully selected components. SAKRETE Mortar Mix, Type S conforms to CSA A179-14 for Type S Mortar when used as directed. This product is grey in colour but can also be blended with a variety of colouring agents. FEATURES & BENEFITS • Economical • High compressive strength • Superior bond strength • Excellent resistance to freeze-thaw cycles • Pre-blended, ensuring consistency USES • Foundation walls, retaining walls, manholes or sewers • Parapet walls and masonry applications subjet to high saturation levels such as chimneys and free-standing boundary walls • Indoor applications, outdoor applications, or for any other masonry application where load-bearing walls require a high compressive strength • Above or below grade construction • Block tuck pointing PACKAGING UPC 30 KG (66 lb) bag 055226120667 ||||| 3rd option: SAKRETE top’n bond is a polymer modified, pre-blended, ready-to-use, cement mixture with superior bonding, specifically designed for repairing concrete quickly and easily. Forms a bond that is 8 to 10 times stronger than that of regular cement mix. Use for concrete repairs from a feather-edge up to 1/2 inch (1.25 cm) thick. Open to light foot traffic in 12 to 24 hours, and heavy traffic after 48 hours. FEATURES & BENEFITS • Sticks to existing concrete • Feather-edges easily • High strength • Just add water USES Ideal for repairing, smoothing or resurfacing concrete slabs, driveways, sidewalks, steps, walls or any worn, chipped or spalled concrete surface. It may also be used for setting dense surfaced stone, marble or slate, and as a setting bed for quarry tile, flagstone, brick or patio block units. PACKAGING UPC 2 KG (4.4 lb) plastic pail 055226161042 5 KG (11 lb) plastic pail 055226161110 10 KG (22 lb) plastic pail 055226110118 20 KG (44 lb) bag 055226161448
Répondue par: King Packaged Materials
Date de publication: 2020-04-23

Would this be a good mortar mix for a cordwood wall ?( could this mortar be used on wood?)

Posée par: Jessah10
Your question is not a simple answer. The reason is Mortar Mixes are available in various formulas (N, S, M ,O, K,) each designed for specific applications. For your project you should 1st discover what your local building code or project Engineer recommends 1st and how it should be placed. Then a correct recommendation can be made. thank you
Répondue par: King Packaged Materials
Date de publication: 2019-02-21

May I use it for repairing my driveway cracks?

Posée par: Eric78
Thank you for your inquiry. Mortar Mix to fix concrete drives is not recommended. SAKRETE top'n bond would be ideal for your repair http://www.kpmindustries.com/KingHomeImprovementProducts/product/sakrete-topn-bond/
Répondue par: King Packaged Materials
Date de publication: 2020-10-11
  • y_2021, m_6, d_16, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_fr_CA, sid_1000779604, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 124ms
  • QUESTIONS, PRODUCT