L’événement Gonflé à bloc est en cours. N’attendez pas!  Magasiner l'événement.

Aperçu

Modèle # AC13B01N Internet # 1001710227

RIDGID présente la gaine de protection en caoutchouc pour clé à chocs de 1/2 pouce. Cette protection est fabriquée en caoutchouc durable pour garantir la sécurité de votre clé à chocs 1/2 pouce sur le chantier. Cette protection pour clé à chocs 1/2 pouce est compatible avec la clé à chocs 1/2 pouce RIDGID (R86012B). Cette protection en caoutchouc est conçue pour éviter d'endommager votre outil en cas de chute et réduire l'usure générale. Cet article est fabriqué à partir de matériaux de source mondiale et est garanti contre les défauts de fabrication. Pour plus dinformations, contactez le service client.

  1. Compatible avec la clé à chocs 1/2 po sans balai 18 V (R86012B).
  1. Conçu pour la clé à chocs RIDGID 18 V sans balai à couple élevé de 1/2 po.
  1. Fabriquée en caoutchouc durable
  1. Ajustement serré pour une protection et une durabilité accrues sur le chantier.
  1. Conçu pour réduire l'usure tout en assurant une protection supplémentaire de l'outil.
  1. Comprend (1) gaine de protection en caoutchouc pour les clés à chocs 1/2 po RIDGID

Spécifications

Dimensions

Hauteur assemblé (en pouces)
3.07
Hauteur de l’emballage (en pouces)
3.2
Largeur assemblée (en pouces)
3.47
Largeur de l’emballage (en pouces)
3.7
Poids assemblé (en livres)
0.35
Poids de l’emballage (en livres)
0.55
Profondeur assemblé (en pouces)
6.49
Profondeur de l’emballage (en pouces)
6.6

Détails

Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Produit léger, Fonctionnement par temps froid, Fonctionne bien par temps froid
Nombre de pièces dans l'ensemble
1
Pays d'origine
CN-China
Portatif ou fixe
Portatif
Type d'accessoire
Accessoires spécialisés pour outils à moteur
Type d'accessoire pour outils à moteur
Autres accessoires

Garanties et certifications

Pour plus de détails sur la garantie, veuillez appeler le 1-866-539-1710
Botte de protection pour clé à chocs 1/2 pouce (compatible avec R86012B)RIDGID Botte de protection pour clé à chocs 1/2 pouce (compatible avec R86012B)RIDGID présente la gaine de protection en caoutchouc pour clé à chocs de 1/2 pouce. Cette protection est fabriquée en caoutchouc durable pour garantir la sécurité de votre clé à chocs 1/2 pouce sur le chantier. Cette protection pour clé à chocs 1/2 pouce est compatible avec la clé à chocs 1/2 pouce RIDGID (R86012B). Cette protection en caoutchouc est conçue pour éviter d'endommager votre outil en cas de chute et réduire l'usure générale. Cet article est fabriqué à partir de matériaux de source mondiale et est garanti contre les défauts de fabrication. Pour plus dinformations, contactez le service client.
RIDGID
1001710227
CAD58.982024-04-14
Home Depot Canada
Botte de protection pour clé à chocs 1/2 pouce (compatible avec R86012B) est évalué 4.5 de 5 de 88.
  • y_2024, m_4, d_14, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_25, tr_63
  • loc_fr_CA, sid_1001710227, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 100ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Flexible protective boot [This review was collected as part of a promotion.] Never realized there was such a thing as a protective boot for your power hand tools but came across this and now I'm thinking I might like to have one for my other drivers as well. This boot is made of a lightweight, flexible rubbery material and has some stretch to it which makes it easy to put on. It encases the tool head and protects it from damage such as the damage you can see in my picture of our impact drill. Probably should order a boot for that as well. Also keeps the tool clean. Protects the tool as well as the surface on which you are working.
Date de publication: 2022-04-11
Rated 5 de 5 de par Need to keep you impact protected from impacts, use this! [This review was collected as part of a promotion.] I picked up this RIDGID protective boot for my mid-torque 1/2" impact. I don't own a fancy garage and I'm not a professional mechanic so I want my tools to last as long as possible since replacing them isn't a business expense. Tools have a tendency to get knocked off of workbenches more often than they should around my shop space so I invested in this boot to protect my impact from impacts (see the irony?). It fits nice and seems like it will last a long time. Note - this is for the new style mid-torque impact, not the previous generation.
Date de publication: 2022-08-18
Rated 5 de 5 de par Great Upgrade [This review was collected as part of a promotion.] This is a simple little protective case that adds lots of protection to your tool. This silicone case is very easy to install and it improves not only the tools protection but also its much easier to hold get a very good solid grip on the tool. This in itself helps to add to the usefulness of the tool in tight spaces with limited hand space. Before you install the new cover its a good idea to warm the cover up. This makes installation much easier and much quicker. This cover fits like a glove and looks like it was installed at the factory.
Date de publication: 2022-04-09
Rated 5 de 5 de par Prevents impact damage to tool [This review was collected as part of a promotion.] The protective boot fits the 18V Brushless Mid Torque 1/2 in. Impact Wrench by Rigid to help prevent accidental damage to your tool if it is knocked over or gets very rough treatment on the jobsite. Its made a rubber and is stretched over the head of the impact wrench and stays firmly in place - its harder to take off than to get it on which is a good thing. Apart from it being very lightweight and feels comfortable it has good traction when i grab the wrench head when im in a hurry. This will keep the impact wrench looking newer longer
Date de publication: 2022-03-27
Rated 5 de 5 de par GREAT PIECE OF EQUIPMENT TO PROTECT YOUR EQUIPMENT [This review was collected as part of a promotion.] Was on the HOME DEPOT WEBSITE and saw this RIGID PROTECTIVE BOOT and got it to protect my equipment - this 18V BRUSHLESS RIGID PROTECTIVE BOOT is easy to install on tool due to pliable rubber material - this RIGID PROTECTIVE BOOT is well made and should last for a really long time - this RIGID PROTECTIVE BOOT will protect your valuable investment from moisture and also in case you drop it this RIGID PROTECTIVE BOOT will protect your tools from diverse environments, whether inclement or otherwise - this RIGID PROTECTIVE BOOT is a very good value considering value of tools at today's prices - this RIGID PROTECTIVE BOOT is a great addition to anyone:s toolbox
Date de publication: 2022-12-18
Rated 3 de 5 de par Nice Boot [This review was collected as part of a promotion.] The RIDGID Protective Boot is for a 1/2 inch mid-torque impact wrench is a bit thin in my opinion. I'm not sure how well it would protect an impact wrench. It has nice size air vents that should allow for sufficient air flow. It does have all the curves to provide s decent fit. I have the wrong impact wrench for this to fit so I cannot show an install picture.
Date de publication: 2022-11-23
Rated 5 de 5 de par Wanting to protect my impact wrench, I got an Impact Wrench Protective Boot. [This review was collected as part of a promotion.] Wanting to protect my impact wrench, I got an Impact Wrench Protective Boot. Since, I have distroyed two tools already, why not use a boot to protect my new tool. [photo 1] It fits tight and getting it on took some stretching of the boot. [photo 2] Now that it is on the tool, I can not notice any adverse reactions. The tool is well covered [photo 3] and worry about breaking some part when I drop this tool is put to rest. If you find this helpful than please press the helpful button.
Date de publication: 2022-07-28
Rated 5 de 5 de par A well needed accessory [This review was collected as part of a promotion.] When you are using a powerful Impact wrench such as the 1/2 Inch Ridged Torque / driver it can become difficult to hold ,especially when your hands may get wet from the heat and sweating. Now finally there is a product which I think will solve that problem and make an awful lot of mechanics very happy. The product is a rubber boot/cover to help reduce the impact and improve the comfort as well as the grip. This should be a much appreciated addition to the Ridged tool line
Date de publication: 2022-03-26
  • y_2024, m_4, d_14, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_25, tr_63
  • loc_fr_CA, sid_1001710227, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 23ms
  • REVIEWS, PRODUCT

Why does this say it's Made for RIDGID 18V Brushless High Torque 1/2 in. Impact Wrench does it fit it?

Posée par: Marc
Hi Marc, Thanks for reaching out to us regarding the RIDGID 1/2in Impact Wrench Protective Boot. This protection boot fits on our RIDGID 18V Brushless 4-Mode 1/2 in. Mid-Torque Impact Wrench (Tool Only). For further information, please contact RIDGID Customer Support at 1-800-474-3443. Thanks, RIDGID Canada Team. ridgidcanada@ttigroupna.com
Répondue par: The RIDGID Canada Team
Date de publication: 2023-03-08

Will this fit my older impact gun model R86011SB2?

Posée par: Beau
Hi Beau, Thanks for reaching out to us regarding the 1/2in Impact Wrench Protective Boot (Compatible with R86012B). This protective boot is only compatible with the R86012 and R86012PD 18V Brushless 4-Mode 1/2 in. Mid-Torque Impact Wrenches. For further information, please contact RIDGID Customer Support at 1-800-474-3443. Thanks, RIDGID Canada Team.
Répondue par: The RIDGID Canada Team
Date de publication: 2023-11-14

Will it fit on the Ryobi P262 mid-torque impact since they are both made by the same company?

Posée par: tdallas90
Hello, Tdallas90 - Thank you for your question. I'm sorry, no. This boot is only compatible with RIDGID 18V Brushless 4-Mode 1/2 in. Mid-Torque Impact Wrenches (R86012 & R86012PD). I hope this helps! Additionally, if you need further support, then a RIDGID Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.866.539.1710 or through email or live chat when you visit us at https://register.ridgidpower.com/contact. And thank you again for your interest in the Protective Boot for 1/2 in. Mid-Torque Impact Wrench. - Jewel
Répondue par: RIDGID
Date de publication: 2023-05-07

Does this come with LSA?

Posée par: Boots
Hello, Boots - Thank you for your interest in the Protective Boot for 1/2 in. Mid-Torque Impact Wrench. I'm sorry, no. This item is not eligible for the Lifetime Service Agreement.  Additionally, if you need further support, then a RIDGID Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.866.539.1710 or through email or live chat when you visit us at https://register.ridgidpower.com/contact. I hope this helps! --Jewel
Répondue par: RIDGID
Date de publication: 2023-05-07

does this boot fit the 86011 impact?

Posée par: Curious
Hello, Curious - Thank you for your question. Unfortunately, no this is not compatible with model R86011. I hope this helps! Additionally, if you need further support, then a RIDGID Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.866.539.1710 or through email or live chat when you visit us at https://register.ridgidpower.com/contact. And thank you again for your interest in the Protective Boot for 1/2 in. Mid-Torque Impact Wrench. - Joyce
Répondue par: RIDGID
Date de publication: 2023-11-28

Will this fit the R86012B?

Posée par: Joefriday
Hello, Joefriday - Thank you for your question. Yes. This boot is compatible with the R86012B. I hope this helps! Additionally, if you need further support, then a RIDGID Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.866.539.1710 or through email or live chat when you visit us at https://register.ridgidpower.com/contact. And thank you again for your interest in the Protective Boot for 1/2 in. Mid-Torque Impact Wrench. - Jewel
Répondue par: RIDGID
Date de publication: 2023-08-17

Will this fit the octane mid torque.

Posée par: Chris
Hello, Chris - Thank you for your interest in the Protective Boot for 1/2 in. Mid-Torque Impact Wrench. This boot is compatible with RIDGID 18V Brushless 4-Mode 1/2 in. Mid-Torque Impact Wrenches (R86012 & R86012PD).  Additionally, if you need further support, then a RIDGID Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.866.539.1710 or through email or live chat when you visit us at https://register.ridgidpower.com/contact. I hope this helps! --Jewel
Répondue par: RIDGID
Date de publication: 2023-05-07

Will this fit the Ridgid R86011?

Posée par: MPQ1
Hello, Mpq1 - Thank you for your question. I'm sorry, no. This boot is compatible with RIDGID 18V Brushless 4-Mode 1/2 in. Mid-Torque Impact Wrenches (R86012 & R86012PD) I hope this helps! Additionally, if you need further support, then a RIDGID Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.866.539.1710 or through email or live chat when you visit us at https://register.ridgidpower.com/contact. And thank you again for your interest in the Protective Boot for 1/2 in. Mid-Torque Impact Wrench. - Jewel
Répondue par: RIDGID
Date de publication: 2023-05-07
  • y_2024, m_4, d_14, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_fr_CA, sid_1001710227, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT