• Panier
  • En raison d’une forte augmentation de la demande, les délais peuvent être plus longs pour ramasser votre commande et pour la livraison. Veuillez attendre de recevoir le courriel de confirmation ou bien vérifier l'état de votre commande.Vérifier l'état de votre commande

    RIDGID Ensemble de toupie robuste de 2 HP de puissance de crête

    Modèle nº R29303|Nº UGS 1000663450

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # R29303 Internet # 1000663450

    Ensemble de toupie RIDGID de 2 HP pour service intensif. Comprend : moteur R2901 avec pince de 1/2 po, base fixe R2911, base plongeante R29202, clé, outil et broche de centrage, clé pour poignée en T, adaptateur à pince de 1/4 po, deux accessoires pour aspirateur, sac pour service intensif et guide d'utilisation. Alimentation : 120 V c.a., 11 A Puissance de pointe : 2 HP Vitesse à vide : de 10 000 à 23 000

    1. Réglage à travers la table - microréglage de la profondeur à travers la table assurant une précision et une commodité accrues
    1. Éclairage à DEL et base en coupe permettant une visibilité exceptionnelle de la fraise pour assurer le retrait précis des matériaux
    1. Dispositif électronique de réglage de la vitesse avec rétroaction pour aider à maintenir la vitesse sous leffet de la charge
    1. Microréglage de la profondeur à travers la table assurant une précision et une commodité accrues
    1. Balais accessibles permettant daccélérer lentretien et de réduire les interruptions
    1. Convention d'entretien à vie : Pièces et service gratuits à vie avec enregistrement
    1. La conception surmoulée à trois points des coussinets No Mar Pads prévient le marquage accidentel des surfaces délicates.

    Spécifications

    Dimensions

    Hauteur assemblé
    10
    Hauteur de l’emballage (en pouces)
    19.68
    Largeur assemblée
    8.86
    Largeur de l’emballage (en pouces)
    8.86
    Poids assemblé
    17.89
    Poids de l’emballage (en livres)
    18.167
    Profondeur assemblé
    19.69
    Profondeur de l’emballage (en pouces)
    10

    Détails

    Certifié
    Oui
    Pays d'origine
    CN-China

    Garanties et certifications

    Contrat de service à vie avec enregistrement dans les 90 jours suivant l'achat. Pour plus de détails sur cette garantie, veuillez composer le 1-866-539-1710 ou visiter le site www.RIDGID.com
    Ensemble de toupie robuste de 2 HP de puissance de crêteEnsemble de toupie robuste de 2 HP de puissance de crêteEnsemble de toupie RIDGID de 2 HP pour service intensif. Comprend : moteur R2901 avec pince de 1/2 po, base fixe R2911, base plongeante R29202, clé, outil et broche de centrage, clé pour poignée en T, adaptateur à pince de 1/4 po, deux accessoires pour aspirateur, sac pour service intensif et guide d'utilisation. Alimentation : 120 V c.a., 11 A Puissance de pointe : 2 HP Vitesse à vide : de 10 000 à 23 000
    RIDGID
    1000663450
    Ensemble de toupie robuste de 2 HP de puissance de crête est évalué 4.1 de 5 de 51.
    • y_2020, m_7, d_7, h_15
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasreviews, tv_11, tr_40
    • loc_fr_CA, sid_1000663450, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 92ms
    • REVIEWS, PRODUCT
    Rated 5 de 5 de par Encore de satisfaction Comme a chaque achat Ridgid ,la satisfaction est au rendez-vous. toupie tres versatile base fixe en permanance sur la table j'adore, plus besoin de monte démonte sur la table Puissance de 2Hp tres respectable .J,aime bien les ajustements des fers par le dessus de la table .Bravo pour la qualité/prix du produit ! .
    Date de publication: 2020-06-12
    Rated 4 de 5 de par Router Table Issues - but good overall. I bought this about a year or two ago and am happy with it for the most part. I had it mounted in my router table and was using the T wrench to adjust the height from above and the router fell out of the base and the housing damaged and now binds in the bases. I find I can't depth adjust the router in the table without a hand under it for when it falls as it almost always does. Other wise I have been happy with the router.
    Date de publication: 2020-01-30
    Rated 1 de 5 de par Unreliable Bought this router for basic surfacing purposes and have had nothing but problems from the get go. Numerous screw fell out from vibrations , bearing blew within the first months, there is an excessive amount play even when the router is locked it will still slightly drift lower over time while using. All in all, I consider it money wasted. Will not be purchasing ridgid again as their planner gave me nothing but problems as well.
    Date de publication: 2020-01-13
    Rated 4 de 5 de par Very good kit After using it for a few weeks, I really like this kit. My only drawbacks are in the design of the tool and none with the performance. For example, the locking pin for the shaft is hard to reach when changing bits. I wish this was more accessible, especially for people with larger hands. My other issue is with the collets, they provide a 1/4" adapter, but I wish it was just a seperate collet. The adapter works well but it would just be better to have a seperate collet. Furthermore, the router tends to stick in the bases when changing bases or just removing the router. A little oil should solve that however. I heard people complain about side-side movement in the plunge base but I have not experienced any issues in that regard, it is very solid. All in all, I'm very happy, especially for the price range.
    Date de publication: 2019-12-01
    Rated 1 de 5 de par good router,terrible bases I have had this router a couple years now. The router itself is a great, but the two bases that come with it are terrible. The router slides in the fixed base at higher RPMS because there is too much wiggle room with the slot piece, and the plunge base stuck terribly and after only a couple uses actually blew apart, and without a decent base to use the router is fairly useless despite all its power and potential.
    Date de publication: 2018-06-01
    Rated 5 de 5 de par Solid router Super powerful solid router. I can’t imgine wanting more from it.
    Date de publication: 2018-04-13
    Rated 2 de 5 de par Plunge Base Sticks! I've had it about a year and not used the plunge base much but now that I'm working on a project that requires a lot of that I find that the plunge base sticks so badly that I crash past the stop and ruin my work. I've tried cleaning the towers, lubricating them with graphite and teflon, to no avail. I didn't register it and don't have the receipt so I'll probably mount it permanently in my router table and get another plunge router.
    Date de publication: 2018-02-08
    Rated 1 de 5 de par Awesome, but eventually unusable I must start by stating that this router is awesome in terms of function. For that, it gets one, well deserved star. Unfortunately, there is a serrious and well documented design flaw in this model. The last time I used this router was about 4 mionths ago, and I noticed a lot of corrosion when I switched from the fixed base mounted in my table to the plunge base. I had to lightly sand the router body and inside of the plunge base to get the two to fit together. Fast forward to today and I was unable to separate the router from the plunge base. I spent about 15 minutes using a dead blow mallet to separate the two as gently as I could. Once apart, I noticed a significant amount of corrosion around the exposed edges of the router body. As mentioned here and elsewhere, this is a long-standing, common issue with this router, and I have found complaints as far back as 2009 for the same problem. Because the body of this router is made with magnesium, and probably a low-purity alloy at that, it is prone to corrosion, even in environments where other tools made of cast iron and steel have no issues. So, if you are not willing to take extreme precautionary measures to protect this thing from even normal environmental conditions, DO NOT buy this router.
    Date de publication: 2016-12-01
    • y_2020, m_7, d_7, h_15
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasreviews, tv_11, tr_40
    • loc_fr_CA, sid_1000663450, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 60ms
    • REVIEWS, PRODUCT

    Will this work on the Bosch router table?

    Posée par: Ryan
    Hi Ryan, This is a hand held Heavy Duty 2HP Router Combo Kit that can be mounted to a router table. We are not positive that it will match your Bosh router table. For information regarding this type of question you would need to reach out to Bosh directly. Thanks and we hope our information helps! RIDGID Canada.
    Répondue par: The RIDGID Canada Team
    Date de publication: 2020-05-19

    does this plunge base fir the 18v router that ridgid offers?

    Posée par: Nathan
    Hi Nathan, Unfortunately it does not. Thanks, RIDGID Canada
    Répondue par: The RIDGID Canada Team
    Date de publication: 2020-03-30

    Where can you find the serial number of the plunge base (R29202) and fixed base (R2911) for LSA registration? The Ridgid phone support told me to use the motor serial number instead if I couldn't find it on the bases but I don't think that make sense.

    Posée par: MC77
    Hi MC77, I can confirm that yes you do only need the serial number from power base and not the two attachments. The serial number for the router is inclusive of the two additional bases. Thanks, RIDGID Canada
    Répondue par: The RIDGID Canada Team
    Date de publication: 2019-09-09

    What's the difference between this model and the R2200?

    Posée par: road junkie
    Hi Road Junkie, This router comes with an extra attachment giving you the ability to use it as a plunge router, the R2200 just comes with a fixed base.
    Répondue par: The RIDGID Canada Team
    Date de publication: 2019-06-04

    Does this model have a soft start?

    Model R29302
    Posée par: Anonyme
    Yes it does
    Répondue par: Freddyallsmile
    Date de publication: 2015-03-01

    WHERE CAN I BUY A 1/4" COLLET ADAPTOR FOR THIS ROUTER

    PART NO. 672036001 KEY 42 I LIVE IN HAMILTON ONTARIO CANADA
    Posée par: Anonyme
    It was included in my purchase. If you did not get one contact Rigid. I have found they are very helpful.
    Répondue par: Freddyallsmile
    Date de publication: 2019-06-21

    Where can I buy a router table and guide bar for ridge router?

    Posée par: Anonyme
    make your own table the new yankee workshops norm abrahms had posted plans on his site, get the plans then go to home depot get yourself the freud top plate BF4000 this is a universal top plate which allows you to use your clear base plate of the router to drill the attachment hole for the RIDGID router perfectly. It is a solid top plate and fits the router perfectly
    Répondue par: Robeben
    Date de publication: 2013-10-23

    Can the over the table adjustment feature be used with the freud table without modification to table?

    Posée par: Anonyme
    I HAVE NOT USED THE FREUD TABLE BUT MADE MY OWN USING THE FREUD UNIVERSAL TOP PLATE AND IT WORKS GREAT
    Répondue par: Robeben
    Date de publication: 2013-10-23
    • y_2020, m_7, d_9, h_15CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_13
    • loc_fr_CA, sid_1000663450, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 96ms
    • QUESTIONS, PRODUCT