L’événement On se met à l’oeuvre est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # R4110 Internet # 1000404587

La scie à onglets mixte coulissante RIDGID de 10 po (254 mm) avec laser réglable comporte un moteur pour service intensif de 15 A convenant aux coupes les plus difficiles.Système ajustable dalignement au laser Exactline le laser ajustable permet à lutilisateur daligner avec précision la lame avec le trait de coupe. Surface de marquage Repeat-A-Cut permet à lutilisateur de répéter la même coupe. Les capacités de biseaux de 0 à 48° et donglets de 0 à 50° permettent deffectuer une grande variété de coupes. Inclut : Scie à onglets MS1065, guide laser ajustable Exactline, rallonge de table, lame à dents au carbure, sac à poussière, guide à poussière, serre joint, clé pour lame, clé hexagonale, et manuel dutilisation.

  1. Puissant moteur de 15 A – pour les travaux les plus difficiles
  1. Plages de biseaux et donglets étendues – les capacités de biseaux de 0 à 48° et donglets de 0 à 50° permettent deffectuer une grande variété de coupes
  1. Rallonge de table gauche – pour un meilleur soutien des planches
  1. Surface de marquage Repeat-A-Cut™ – permet à lutilisateur de répéter la même coupe
  1. Convention d'entretien à vie : Pièces et service gratuits à vie avec enregistrement
  1. Capacités de coupe : Plinthe contre clôture Moulure de couronne plate de 3 1/2 po 4 Plinthe plate de 3/4 po Plinthe plate de 6/4 po Plinthe plate de 6 po Coupe transversale de 90° (nominale) 2 po x 6 po ou 4 po x 4 po Coupe en onglet de 45° (nominale) 2 po x 4 po Coupe en biseau de 45° (nominale) 2 po x 6 po (nominale) 2 po x 6 po.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
15.87
Hauteur de l’emballage (en pouces)
15.83
Largeur assemblée (en pouces)
10.03
Largeur de l’emballage (en pouces)
18.3
Poids assemblé (en livres)
34.1
Poids de l’emballage (en livres)
35.42
Profondeur assemblé (en pouces)
23.86
Profondeur de l’emballage (en pouces)
25

Détails

Certifié
Pays d'origine
CN-China

Garanties et certifications

Contrat de service à vie avec enregistrement dans les 90 jours suivant l'achat. Pour plus de détails sur cette garantie, veuillez appeler le 1-866-539-1710
Scie à onglets composés de 254 mm (10 po) avec laser ajustableRIDGID Scie à onglets composés de 254 mm (10 po) avec laser ajustableLa scie à onglets mixte coulissante RIDGID de 10 po (254 mm) avec laser réglable comporte un moteur pour service intensif de 15 A convenant aux coupes les plus difficiles.Système ajustable dalignement au laser Exactline le laser ajustable permet à lutilisateur daligner avec précision la lame avec le trait de coupe. Surface de marquage Repeat-A-Cut permet à lutilisateur de répéter la même coupe. Les capacités de biseaux de 0 à 48° et donglets de 0 à 50° permettent deffectuer une grande variété de coupes. Inclut : Scie à onglets MS1065, guide laser ajustable Exactline, rallonge de table, lame à dents au carbure, sac à poussière, guide à poussière, serre joint, clé pour lame, clé hexagonale, et manuel dutilisation.
RIDGID
1000404587
Scie à onglets composés de 254 mm (10 po) avec laser ajustable est évalué 4.3 de 5 de 52.
  • y_2024, m_5, d_26, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_52
  • loc_fr_CA, sid_1000404587, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 88ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par I just bought this saw,and was totally amazed!Right out of the box it was percisely acurate!I read the instructions,and checked All of the adjustments,and the people at rigid sent it out right on the money!I tried to repeat a cut 6 times,and with in a minute was done,and I couldn't figure out which was the first!I have owne3d the cheaper saws,and they shook upon starting them,but the rigid saw started smooth,and cut Exactly on the laser line,which when installed,never had to be touched again!I would highly recommend this to anyone,and for the xtra money,was well worth it,and know it will OUT last the other saws!I rate this saw a 10!
Date de publication: 2010-09-12
Rated 1 de 5 de par Terrible Bevel Cuts Although the blade is square to both the fence and miter table, the saw cannot cut a square bevel cut. It's about 2 degrees off, meaning, when you have the miter table set at 0 and the bevel angle set at 45, you end up with a compound cut. There are no adjustments for this flaw; all you can adjust is the squareness of the blade to the table and fence, which only accounts for squaring your miter cuts. I suppose you could jury rig a fix here, but you'll sacrifice precision and time, as each cut will have to be done on scrap to ensure its accuracy. Really disappointed.
Date de publication: 2010-12-23
Rated 5 de 5 de par GREAT SAW Ive had this saw for 5+years!!! Not A problem with it what so ever. Cut many many feet of hardwood trim , Vinyl siding, pvc pipe. 2x4's , you name it!!!! Square up the blade when you first set this saw up and use the miter gage and every cut dead on. This thing takes a lot of abuse and keeps going. I would buy another one in a heart beat if I had to +++++
Date de publication: 2013-01-30
Rated 5 de 5 de par Perfect 10 Strong, Accurate, Light Weight, Durable 10" miter saw. Excellent price when I bought mine. I have 15 years carpentry/building experience and I use this saw currently on most of my finish work; I recommend it. This is a great 10" saw.
Date de publication: 2010-06-22
Rated 5 de 5 de par Contrary to those who say they can't get it square... Before purchasing this I read a lot fo the reviews. If you could not get the blade square keep in mind 2 things - First if you could not get it square, and it was wildly out of square from the factory - try this - if you mount the laser level the included arbor bolt is not a spare - you must use the new recessed one or it will not fit properly. Also keep in mind you have to square it in two directions - to the fence and to base/table. Mine was barely off from the table, and was easily adjusted. It was dead square from the fence, so I did not fool with that one. I added the dewalt precision trim blade (reasonably priced upgrage, thin kerf, 60 tooth), and this thing sounds, and cuts smooth and clean with little vibration - a very nice saw in my opinion.
Date de publication: 2012-05-20
Rated 5 de 5 de par 10" Compound Miter Saw This Miter saw is everything any homeowner could need to repair things like door frames, moldings or just any building project. I have always had a hard time cutting a square 45 degree angle.....always warped....but not any more. This saw is great. I wish I had bought it a long time ago. I am using it now to cut the correctly fitting angles on my French doors outside framing. I also like the Lifetime Service on the saw....sweet! The set up was very easy, clear instructions and works like a charm.
Date de publication: 2010-09-05
Rated 4 de 5 de par Rigid 10" Miter Saw The saw works very well, and the laser is a great aid, once you get it set properly. The directions are poorly written, and be prepared for some frustration when setting up this saw. For example, instrucions are given for an item, but the pictorial does not show the part that is being discussed, and you will have to peruse the instruction booklet to find the part that is being referred to. Also, a page is referred to in the booklet that has nothing to do with the item being discussed, so you will have to figure out the correct page. Would give this saw 5 stars but for the instructions. Not easy for the layman to work with. Almost took it back. So, if you don't mind the set up frustration, it is a good saw.
Date de publication: 2010-10-31
Rated 5 de 5 de par great saw and awesome price i just received this saw as an early Christmas present. it has great features, mine works perfect and is squared right out of the box. laser is supposed to be just off to the left of your line, even says so in the manual. and there is no safety button to depress first like someone else stated. maybe they have updated it. either way great saw.
Date de publication: 2013-12-18
  • y_2024, m_5, d_26, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_52
  • loc_fr_CA, sid_1000404587, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 47ms
  • REVIEWS, PRODUCT

Will this saw cut a 4x4 all the way through the board at a 45 degree angle?

Posée par: Dick
No. 2x4 is max at 45 degree mitre.
Répondue par: mickeyg
Date de publication: 2023-05-03

What is the RPM rating for the Rigid 15 Amp 10" compound Miter Saw?

Posée par: Dr.
5000 rpm, very fast and smooth cut.
Répondue par: oldcoopdog
Date de publication: 2023-05-03

max cut at 45 degree

Posée par: spasm
it claims a 2x4
Répondue par: oldcoopdog
Date de publication: 2023-05-03

if i buy a ridgid tool in the US, is the lifetime guarantee honored in Canada?

Posée par: Anonyme

is this a sliding compound mitre saw?

it says this is a sliding saw but does not look like it so is this a sliding compound mitre saw? or not?
Posée par: Anonyme
This is a chop style saw only. It is not a slider. We do have a 10 inch sliding saw in the Ryobi line of products.
Répondue par: ridgidexpert
Date de publication: 2013-10-23

can you buy replacement handles for the chop saw without the trigger assembly

Posée par: Anonyme
You can get these from a service center or through ordering through the associates at the store. They can order from our parts supplier
Répondue par: ridgidexpert
Date de publication: 2013-10-23

Blade guard and laser.

Are replacement parts available?
Posée par: Anonyme
Yes they are. They can be ordered through an associate at the store, or a service center may provide them for you as well, and they may fix the gaurd for you too.
Répondue par: ridgidexpert
Date de publication: 2013-10-23

Where can I get my cut fence alignment corrected. It doesn't cut a square 90 degrees cut off of the fence

Posée par: Willie
Hi Willie. For help with your fence please call our customer service. 866-539-1710. Thanks for asking. Greg
Répondue par: RIDGID Power Tool Team
Date de publication: 2023-05-06
  • y_2024, m_5, d_26, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_fr_CA, sid_1000404587, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 77ms
  • QUESTIONS, PRODUCT