Articles pour l’extérieur et terrasses Climatisation et chauffage Cuisine Cuisson à l'extérieur et barbecues Décor et Meubles Électricité Électroménagers Luminaires et ventilateurs de plafond Maison intelligente Matériaux de construction Organisation et entreposage Outils Peinture Plomberie Portes et fenêtres Produits nettoyants Quincaillerie Revêtements de sol Salle de bain Stores et habillages de fenêtre Terrasses, bois de consturction et composite Tous les départements Articles saisonniers en liquidation Rénovez à bon prix Décorations Halloween
Économisez jusqu'à 50 % sur certains articles de saison.  Magasiner maintenant!

RYOBI Jeu d'embouts de toupie droits (5 pièces)

Modèle nº A25RS51|Nº UGS 1001190552

RYOBI Jeu d'embouts de toupie droits (5 pièces)

Aperçu

Modèle # A25RS51 Internet # 1001190552

RYOBI présente le jeu d'embouts à toupie droite en 5 pièces. Ces mèches sont dotées de lames au carbure de tungstène pour plus de durabilité et ont une vitesse de rotation maximale de 30 000 tr/min. Pour en savoir plus sur les outils RYOBI, rendez-vous sur ryobitools.com et consultez le site RYOBI Nation. Cet ensemble de 5 pièces comprend des mèches droites de 1/4 po, 3/8 po, 1/2 po, 5/8 po et une mèche de 5/16 po en prime.

  1. Conçu pour s'adapter à une pince de serrage de 1/4 de pouce
  1. Bords de lame en carbure de tungstène pour une durabilité accrue
  1. Capacité maximale de 30 000 tr/min.
  1. Lors du fraisage, enlevez le bois par incréments de 1/8 de pouce au maximum.
  1. Pour de meilleures performances, laisser le foret couper.
  1. Inclut : Mèches droites 1/4", 3/8", 1/2", 5/8", mèches droites 5/8" avec mèches bonus 5/16".

Spécifications

Dimensions

Hauteur assemblé (en pouces)
4.72
Hauteur de l’emballage (en pouces)
4.72
Largeur assemblée (en pouces)
1.97
Largeur de l’emballage (en pouces)
1.97
Poids assemblé (en livres)
0.46
Poids de l’emballage (en livres)
0.5
Profondeur assemblé (en pouces)
5.59
Profondeur de l’emballage (en pouces)
5.59

Détails

Article individuel, Ensemble
Ensemble
Bois traité sous pression
Caractéristiques des accessoires pour outils à moteur
Universel
Matériau
Composite
Nombre de pièces dans l'ensemble
5
Pays d'origine
CN-China
Type
Pour coupe droite et mortaisage
Type d'accessoire pour outils à moteur
Fraises pour toupie
Type de tige
Droit

Garanties et certifications

Pour plus d'informations, veuillez contacter le service clientèle au 1-800-628-0525

Produits connexes

RYOBI Jeu d'embouts de défonceuse en carbure de tungstène (15 pièces)

RYOBI présente le jeu d'embouts de défonceuse en carbure (15 pièces). Ces mèches peuvent être utilisées pour les bordures décoratives, les assemblages et les rognures. Ces mèches de toupie ont des queues de 1/4 de pouce et sont disponibles en tailles de 1/4 à 5/8 de pouce. L'ensemble de mèches de toupie en carbure comprend un boîtier de protection compact.

RYOBI présente le jeu d'embouts de défonceuse en carbure (15 pièces). Ces mèches peuvent être utilisées pour les bordures décoratives, les assemblages et les rognures. Ces mèches de toupie ont des queues de 1/4 de pouce et sont disponibles en tailles de 1/4 à 5/8 de pouce. L'ensemble de mèches de toupie en carbure comprend un boîtier de protection compact.
Voir les détails
Jeu d'embouts de toupie droits (5 pièces)RYOBI Jeu d'embouts de toupie droits (5 pièces)RYOBI présente le jeu d'embouts à toupie droite en 5 pièces. Ces mèches sont dotées de lames au carbure de tungstène pour plus de durabilité et ont une vitesse de rotation maximale de 30 000 tr/min. Pour en savoir plus sur les outils RYOBI, rendez-vous sur ryobitools.com et consultez le site RYOBI Nation. Cet ensemble de 5 pièces comprend des mèches droites de 1/4 po, 3/8 po, 1/2 po, 5/8 po et une mèche de 5/16 po en prime.
RYOBI
1001190552
CAD36.982023-09-21
Home Depot Canada
Jeu d'embouts de toupie droits (5 pièces) est évalué 4.3 de 5 de 456.
  • y_2023, m_9, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_76, tr_380
  • loc_fr_CA, sid_1001190552, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 61ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par I gave this item a 4/5 because after using it twice, the 5/8" bit broke. A portion of the cuttin... I gave this item a 4/5 because after using it twice, the 5/8" bit broke. A portion of the cutting head sheared off while router a 1/4" deep hole in oak. Maybe this was too much for this bit, the 1/2" worked well for the same application. I've used the 5/16" bit (which is the reason I got this kit) to route dado grooves for drawer bottoms in Mahogany and it worked great. The 1/2" bit worked well for routing dado's into oak. The 5/8" bit worked to route a circle into oak (3/4" deep circle with 1/4" passes to achieve final depth) but it failed when I used it to route dado's later on. Overall this is a good kit and a good value. I normally buy Diablo bits but didn't feel like spending the money at the time. I figured I could get the 5/16" bit for what I needed with four extra bits for the price of one diablo, but I broke one already so I guess you get what you pay for.
Date de publication: 2017-09-06
Rated 5 de 5 de par Ryobi Roufer Bits I was going to buy a Diablo 1/4" straight cut for $17.97 when I saw the Ryobi with 5 straight cut bits starting from a 1/4 on up for $19.97 so i purchased the Ryobi thinking i would probably have to throw away the bit after 10 cuts. Was i ever wrong i had a call for more night stands so i have now cut 50 draws and i'm still using the same bit which i think is amazing. The Ryobi 5 bit set is as good as any on the market plus you save a great amount of money
Date de publication: 2016-11-01
Rated 5 de 5 de par I bought this bit set to get the 5/8" bit that I needed, and couldn't find separately. I used it... I bought this bit set to get the 5/8" bit that I needed, and couldn't find separately. I used it to cut an oval shaped hole in the surface of a gun cabinet to inlay a decorative piece. The bit was very sharp and cut fast and precisely. It worked as it was designed, and made a clean, neat cut. My only complaint is that I really didn't need the other four bits in the package, but that is not the fault of this bit. Also, I wish Home Depot, or someone, would come up with a device to easily sharpen these carbide router bits, because eventually they get dull and tend to burn and chip the wood.
Date de publication: 2018-05-10
Rated 1 de 5 de par Absolute garbage They are not sharp. I just tried using 2 of them on a piece of white ash, they tore it up. Not in a good way. Dont be tempted by their cheap price. The roundover bit set didnt not exhibit the same issues.
Date de publication: 2020-01-20
Rated 5 de 5 de par I purchased this set mainly for the 5/16" bit which appears to be an uncommon size. I needed it t... I purchased this set mainly for the 5/16" bit which appears to be an uncommon size. I needed it to install a hidden guide on a pocket door. The groove went the full 1" depth of the bit. I did it in multiple passes to avoid overstressing the bit and that resulted in smooth edges and no noticeable chip out. I'm very pleased with the quality of these bits, especially considering that for a 5/16" bit alone would have cost me nearly as much as this kit. I can't speak to the longevity of these, but if you're a hobbyist or only need them sparingly, they are great!
Date de publication: 2020-08-31
Rated 4 de 5 de par Nice for the price I don't do a lot of routing and looking at using a bit once ( ya right) I decided this was a better purchase than one by one purchasing. Seeing I used two of them I was right. Thank you homedepot for helping with another project.
Date de publication: 2016-04-12
Rated 5 de 5 de par Great for my needs The bit set works extremely well and holds up nicely for my projects. The teeth of the bits are sturdy and have stayed sharp cutting through a variety of woods.
Date de publication: 2015-02-18
Rated 4 de 5 de par Best value These bits are the best value package available. The quality is acceptable (mid-range) and you get versatility that normally would cost $100.
Date de publication: 2015-03-10
  • y_2023, m_9, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_76, tr_380
  • loc_fr_CA, sid_1001190552, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT

Do the bits cone with bearings and on what end if they do

Posée par: Cross1962
Hi Cross1962, These bits are for cutting groves or edges. The depth is adjusted by your router adjustment control. So they would not come with bearing on them. Hope this helps. Greg
Répondue par: RYOBI Tools Team
Date de publication: 2023-05-04

Can these router bits be used on metal clad doors? If so what is the thickest cladding suggested?

Can these router bits be used on metal clad doors? If so what is the thickest cladding suggested?
Posée par: PowPow
No these bits are for wood.
Répondue par: Kadok
Date de publication: 2023-05-04

Can i use a bearing with these bits?

I have another set of router bits with bearibg on the top. Could i use that bearing on these bots as a makeshit flush trim bit?
Posée par: Woog32
Yes. Some of the bits will accept pilot bearings.
Répondue par: DavidG
Date de publication: 2023-05-05

Will these work with the 1-1/2 peak ryobi peak HP fixed based router ? the one that's 8.5 amps ?

Will these work with any ryobi router
Posée par: JustQ
These will work with any router that has a collet that will accept a 1/4 inch shank,or an adapter that will allow it to accept a bit with a 1/4 inch shank.
Répondue par: Grumpy
Date de publication: 2020-01-30

Are these bits universal or are they only compatible with ryobi?

Posée par: Mge
They are universal. Will work with any brand.
Répondue par: CG
Date de publication: 2021-01-17

what is the shaft size for these bits

what is the shaft size for these bits
Posée par: Larry
1/4 inch.
Répondue par: mjd
Date de publication: 2019-03-29

I would like to use one of the straight cut router bits to cut a groove for a 1/4 " thick MDF to ...

I would like to use one of the straight cut router bits to cut a groove for a 1/4 " thick MDF to slide into to serve as the bottom of a drawer. Would it be better to use the 1/4" or the 5/16" bit to cut the groove?
Posée par: FloorCleaner
You're going to want to have a little room around the bottom panel when you put the two together, I am assuming the sides are going to be real wood and that wood will expand and contract with the amount of moisture it is exposed to, so a 16th of inch is plenty, you're not going to want to hit that MDF with anything hard to knock it in the groove, the MDF will probably chip if not break. Personally I would use a quarter inch thick piece of ply wood for the bottom over MDF but that's my preference. Hope this helps you..
Répondue par: Kadok
Date de publication: 2023-05-05

Can i cut an 1” deep with the 1/4 bit?

Cutting out the back of oak for a clock mechanism.
Posée par: Clock
Hi Clock, This bit is for cutting a groove in the wood. You would need to drill a hole larger than the bit and then expand it with the router bit in stages. Hope this helps? Greg
Répondue par: RYOBI Tools Team
Date de publication: 2023-05-05
  • y_2023, m_9, d_20, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_fr_CA, sid_1001190552, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 100ms
  • QUESTIONS, PRODUCT