NOBODY BEATS OUR PRICES GUARANTEED.Terms & Conditions

RYOBI Perceuse et tournevis

Modèle nº AR1892G|Nº UGS 1000705457

Aperçu

Modèle # AR1892G Internet # 1000705457

Enfin un système de perçage et d'entraînement qui peut être changé en un seul geste ! Pré-percer et fraiser les trous, puis retourner le foret pour enfoncer les vis dans la surface de travail. Aucun autre système n'est aussi simple, le système SpeedLoad+ est le moyen le plus rapide et le plus pratique de changer les bits.

  1. #6 - 3/32" Pilat, 2,4mm guidage.
  1. #8 - 7/64" Pilat, 2,8mm guidage.
  1. Perce des trous de guidage de 3/32 po et de 7/64 po.
  1. Comprend 2 navettes contenant chacune une mèche à fraiser et une mèche P2, un porte-outil à tige hexagonale et une clé Allen.

Spécifications

Dimensions

Hauteur assemblé
9.87
Hauteur de l’emballage (en pouces)
14.25
Largeur assemblée
1.26
Largeur de l’emballage (en pouces)
11.02
Poids assemblé
0.24
Poids de l’emballage (en livres)
14.29
Profondeur assemblé
2.87
Profondeur de l’emballage (en pouces)
12.6

Détails

Article individuel, Ensemble
Ensemble
Certifié
Oui
Diamètre de la tige (en po)
1
Matériau de la mèche
Titane
Nombre de pièces dans l'ensemble
2
Pays d'origine
CN-China

Garanties et certifications

N/A
Perceuse et tournevisRYOBI Perceuse et tournevisEnfin un système de perçage et d'entraînement qui peut être changé en un seul geste ! Pré-percer et fraiser les trous, puis retourner le foret pour enfoncer les vis dans la surface de travail. Aucun autre système n'est aussi simple, le système SpeedLoad+ est le moyen le plus rapide et le plus pratique de changer les bits.
RYOBI
1000705457
Perceuse et tournevis est évalué 1.7 de 5 de 21.
  • y_2020, m_9, d_27, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_fr_CA, sid_1000705457, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 98ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par great attachment, very useful This was very handy to use when installing window blinds.
Date de publication: 2016-02-18
Rated 2 de 5 de par Seems like a great idea Just after a feel uses it seems to be dull, but it works.
Date de publication: 2016-01-12
Rated 1 de 5 de par No good Speedload? I don't think so. After using a few times, it got stuck and I was unable to switch from drill/counterisink to driver.
Date de publication: 2015-12-10
Rated 1 de 5 de par Huge waste of money This product is a very poor execution of a great idea. I have used the similar products from dewalt in the past and they worked great, so when I saw this one I decided to purchase it. I returned it to the store an hour later because the driver was stuck inside of the outside holder. They replaced it with another one thinking that the original was defective. A few days later I used the new driver and after one use it became stuck as well. This time I used a vice to pull them apart, however every time I used it the two parts would get stuck back together. This product is cheaply made with poor quality parts and must be modified to be used. I would not recommend this product to anyone, you can find a nice dewalt one like what I have ordered on amazon for around a dollar more than this piece of junk.
Date de publication: 2015-10-27
Rated 1 de 5 de par Worst Ryobi Tool ever purchased since the drill bit stays in the wood/metal and is pulled out of the black tube Worst Ryobi Tool ever purchased since the drill bit stays in the wood/metal instead of the Ryobi black shank. The drill bit and driver portion is pulled out of the Ryobi black tube with the speed+load shank.
Date de publication: 2015-09-22
Rated 2 de 5 de par Poorly designed. I purchased this driver to replace an older set that I'd had. The older ones had a sliding collar that locked the reversible drill/driver bits in place. This new one does not have a locking collar. Instead it uses a ball bearing. The idea is that you can just pull the bit out without having to release the collar. The problem is that it doesn't work at all. When drilling, the bit stays in the workpiece as you pull the drill back. It's a real pain. I've found that if I'm very careful and keep the drill going full speed I can withdraw the drill slowly and have the bit stay together, but it's slow and cumbersome. Not recommended. Look for a set with a sliding collar to lock the bit into the holder.
Date de publication: 2015-09-08
Rated 1 de 5 de par Worst Tool Ever I called Ryobi about this tool. They wasn't concerned about it. We had to remove the tip with pliers to flip it over. After a little bit the black case came loose and left the chuck in the drill and the rest of it stuck in the board. Will never buy another one made by Ryobi. It only lasted 1 day on job site.
Date de publication: 2015-09-02
Rated 1 de 5 de par bits get stuck in the driver socket Though the drill and countersink work well, the bits get stuck in the driver shaft and must be removed with pliers instead of simply coming out as they are supposed to. Frustrating when the reason I bought the drill countersink driver tool was to save time...
Date de publication: 2015-09-01
  • y_2020, m_9, d_27, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_fr_CA, sid_1000705457, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 65ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;