• Panier
  • NOS PRIX SONT IMBATTABLES. NOUS LE GARANTISSONS.Certaines conditions s’appliquent

    SAKRETE fast-patch, 15 kg

    Modèle nº 12091015|Nº UGS 1000109213

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # 12091015 Internet # 1000109213

    Réparez le béton en 20 minutes seulement! Utilisez SAKRETE fast-patch, un matériau de réfection à prise rapide conçu pour les réparations qui exigent une reprise rapide des activités. Offert en contenants de 2 kg, de 5 kg et de 15 kg. Optez pour SAKRETE, le choix des professionnels depuis 1936.

    1. Matériau de réfection de première qualité pour réparer le béton et dont la prise initiale se fait en 8 à 12 minutes
    1. Indiqué pour les réparations rapides de marches, trottoirs, entrées de garage et patios en béton
    1. Poser en épaisseurs allant jusquà 2 po (5 cm)
    1. Permet la circulation pédestre au bout dune heure
    1. Prêt à utiliser; il suffit dajouter de leau

    Spécifications

    Dimensions

    Hauteur assemblé
    12
    Hauteur de l’emballage (en pouces)
    12
    Largeur assemblée
    12
    Largeur de l’emballage (en pouces)
    12
    Poids assemblé
    33
    Poids de l’emballage (en livres)
    33
    Profondeur assemblé
    12
    Profondeur de l’emballage (en pouces)
    12

    Détails

    Matériau du pied de lampe
    Béton
    Pays d'origine
    CA-Canada
    Temps de séchage (h)
    0.5
    Type
    Encastré
    Utilisation suggérée
    Tout usage

    Garanties et certifications

    Ce produit est conçu pour procurer le rendement prescrit dans la présente fiche technique. Si toutefois il est utilisé dans des conditions autres que celles pour lesquelles il est destiné, ou sil est utilisé dune façon contraire aux recommandations prescrites dans la présente fiche technique, il risque de ne pas procurer le rendement prescrit aux présentes.
    fast-patch, 15 kgPhoto of productRéparez le béton en 20 minutes seulement! Utilisez SAKRETE fast-patch, un matériau de réfection à prise rapide conçu pour les réparations qui exigent une reprise rapide des activités. Offert en contenants de 2 kg, de 5 kg et de 15 kg. Optez pour SAKRETE, le choix des professionnels depuis 1936.
    SAKRETE
    1000109213
    fast-patch, 15 kg est évalué 5.0 de 5 de 1.
    • y_2019, m_10, d_19, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_fr_CA, sid_1000109213, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 89ms
    • REVIEWS, PRODUCT
    Rated 5 de 5 de par Stood the test of time. Last summer I used this product to fill in the cracks in our garage floor. We had everything from really tiny ones to deep, wide (+1/4") and long cracks. This product is mostly cement, so I treated it likewise. Clean up and wet the area first, then mix and apply the product. If the weather is warm, wait for afternoon hours to work in the shade or cover with damp cloth for the first hour or so. Keep spraying it with water for the first 24 hours. Any cement product becomes stronger if kept wet. For smaller cracks dilute the mix a bit so that it penetrates deep into the crack and fills it completely. 8 months later, with cars driving and stopping over the repaired floor, it is as good as day one. I'd recommend this product to anyone.
    Date de publication: 2009-01-17
    • y_2019, m_10, d_19, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_fr_CA, sid_1000109213, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 30ms
    • REVIEWS, PRODUCT

    can I use this product on my shower drywall roted out on step?

    Posée par: Anonyme
    yes you could. swift•set is a pre-blended, fast setting, non-shrinking, high strength cement mixture designed to facilitate fast concrete and masonry repairs easily. Use for applications where a thickness of 5 cm (2”) or less is required. Sets in minutes and may be driven on in only 1 hour. By adding gravel, swift•set can be used for repairs exceeding 5 cm (2”) thick. FEATURES & BENEFITS • sets in minutes • high strength • ready to use • non shrinking USES Ideal for fast repairs to concrete sidewalks, curbs, driveways, fl oors, steps, parking garages, loading docks, highway structures, pre-cast units and concrete pipe. May also be used to anchor posts, parking meters and guard rails. PROCEDURES Mix and substrate temperatures should be maintained between 5 and 30ºC (40 and 86ºF) for at least 24 hours prior to and 48 hours after. Surface Preparation: Surfaces to be repaired must be structurally sound and clean. Remove all delaminated or unsound concrete by chipping with a hammer and chisel or using a stiff wire brush. Clean the area to be repaired with potable water, leaving the concrete saturated but free of standing water. Some very porous concretes may require several applications of water to ensure complete saturation. Mixing: Place a small amount of swift•set in a clean container and add cold clean water until the mix is like a slurry. Brush or broom this slurry coat over dampened repair area to act as a prime. Then place remaining contents into a clean mixing container. Add approximately 156 ml (5 1/4 oz) of clean water per 1 kg (2.2 lb) or enough to achieve a workable mix (mortar consistency like putty). Do not mix longer than 1 minute. Avoid a soupy mix. Excess water reduces strength and durability and can cause cracking. In cold weather use warm water to accelerate the set. Use cold water to slow the set in hot weather. Discard any product that sets up. For repairs greater than 5 cm (2”) in depth add fi ne gravel 1.25 cm (1/2”) or smaller at a rate of 0.5 kg (1.1 lb) per 1 kg (2.2 lb) of swift•set. The gravel and swift•set should be dry mixed together before adding the water. Placing: After mixing use a trowel and apply over slurry coat while it is still wet. Force the mixture into the roughened repair area. For deep repairs, rod and tamp to eliminate voids in the patch. Level and smooth the patched area at once. Anchoring Posts and Poles: After mixing, position the post in hole and pour in mix. Align post using a level and check the vertical position. There is no need to brace, swift•set will stiffen almost immediately. Do not rework once the mix has set. Curing: Curing means maintaining proper moisture and temperature. Under normal temperatures, keep the repair damp by spraying with a fi ne mist of water or cover with a plastic sheet for at least 30 minutes. When exposed to high heat, direct hot sunlight, dampen and keep covered for at least 24 hours to protect repair from rapid drying. TECHNICAL DATA Initial Set — approximately 8-12 minutes Typical Compressive Strength 1 hour 7 MPa (1000 psi) 1 day 17 MPa (2500 psi) 7 days 34 MPa (5000 psi) PAINTING Allow 28 days before applying paint. YIELD 1 kg (2.2 lb) yields approximately 180 cm² at 2.5 cm thick (0.2 ft² x 1”).
    Répondue par: King Packaged Materials
    Date de publication: 2019-09-15

    about small holes on my driveway

    i have a driveway that has some surface holes, the smooth part of the driveway has come off. can i use this product
    Posée par: Anonyme
    Top'nbond would be the better choice for your repair. top’n bond is a polymer modifi ed, pre-blended, ready to use cement mixture with superior bonding specifi cally designed for repairing concrete quickly and easily. Forms a bond that is 8 to 10 times stronger than that of regular cement mix. Use for concrete repairs from a feather edge up to 1.25 cm (1/2 inch) thick. Open to light foot traffi c in 12 to 24 hours and heavy traffi c after 48 hours. FEATURES & BENEFITS • sticks to existing concrete • feather edges easily • high strength • just add water USES Ideal for repairing, smoothing or resurfacing concrete slabs, driveways, sidewalks, steps, walls or any worn, chipped or spalled concrete surface. It may also be used for setting dense surfaced stone, marble or slate and as a setting bed for quarry tile, fl agstone, brick, patio block units, etc.
    Répondue par: King Packaged Materials
    Date de publication: 2013-10-23

    How long do I need to wait before painting over surfaces that have been repaired with this product?

    Posée par: Anonyme
    PAINTING Allow 28 days before applying paint.
    Répondue par: King Packaged Materials
    Date de publication: 2013-10-23

    Is this what I would use to fix my concrete steps that seems to have crumbled a bit on the front face?

    By bottom steps seems to be crumbling a bit. Looks like the parging came off and the concrete below has deteriorated a bit. I'd like to repair that deteriorated face of my bottom step, and re-parge it. Is this the correct product to repair my step prior to parging it.?
    Posée par: Anonyme
    i suggest using KING top'n bond. It is designed for these repairs and performs extremely well in colder climates. king-products.com
    Répondue par: KingSakreteRep
    Date de publication: 2013-10-23

    how much does a 15kg King Swift-set cover?

    Posée par: Anonyme
    5 kg covers approx. 900 sq. cm. at 2 ½ cm thick (1 sq. ft. at 1 inch thick) x this by 3 = 15kg coverage king-products.com
    Répondue par: KingSakreteRep
    Date de publication: 2013-10-23

    approximately how much will I need to reface 4 steps x 4 feet wide?

    Posée par: Anonyme
    approx 10 kg. This depends on the thickness and waste. king-products.com
    Répondue par: KingSakreteRep
    Date de publication: 2013-10-23

    Can I use this product to "parge" a small area of a cement foundation?

    Posée par: Anonyme
    yes you can. I recommend using King Parging mix. It is a 25 kg bag and costs much less.
    Répondue par: KingSakreteRep
    Date de publication: 2013-10-23

    I plan on painting my concrete basement floors and walls to eliminate the dust. Will paint interfere with future floor tiles that I plan to installl?

    Posée par: Anonyme
    its possible it may. check 1st with the adhesive to be used for the tiles .This will advise you a direction to seal for dust - paint or not. check with both the flooring and paint dept.
    Répondue par: KingSakreteRep
    Date de publication: 2013-10-23
    • y_2019, m_10, d_19, h_3CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_8
    • loc_fr_CA, sid_1000109213, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 112ms
    • QUESTIONS, PRODUCT
    <?xml version="1.0" encoding="utf-8"?>