• Panier
  • NOS PRIX SONT IMBATTABLES. NOUS LE GARANTISSONS.Certaines conditions s’appliquent

    SAKRETE plug-tite, 15 kg

    Modèle nº 12171015|Nº UGS 1000109195

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # 12171015 Internet # 1000109195

    Bloque les fuites deau provenant de fissures sur les surfaces de béton! Utilisez SAKRETE plug-tite, un ciment hydraulique à prise rapide et sans retrait. Offerts en contenants de 2 kg, de 5 kg et de 15 kg. Optez pour SAKRETE, le choix des professionnels depuis 1936.

    1. Ciment hydraulique à prise rapide et sans retrait de grande qualité
    1. Indiqué pour bloquer les fuites deau actives provenant de fissures sur les surfaces de béton ou de maçonnerie
    1. Laction hydraulique fait que ce ciment se dilate dans les fissures et bloque immédiatement les fuites deau
    1. Prend en quelques minutes
    1. Prêt à utiliser; il suffit dajouter de leau

    Spécifications

    Dimensions

    Hauteur assemblé
    12
    Hauteur de l’emballage (en pouces)
    12
    Largeur assemblée
    12
    Largeur de l’emballage (en pouces)
    12
    Poids assemblé
    33
    Poids de l’emballage (en livres)
    33
    Profondeur assemblé
    12
    Profondeur de l’emballage (en pouces)
    12

    Détails

    Matériau du pied de lampe
    Béton
    Pays d'origine
    CA-Canada
    Temps de séchage (h)
    0.1
    Type
    Scellants
    Utilisation suggérée
    Mur

    Garanties et certifications

    Ce produit est conçu pour procurer le rendement prescrit dans la présente fiche technique. Si toutefois il est utilisé dans des conditions autres que celles pour lesquelles il est destiné, ou sil est utilisé dune façon contraire aux recommandations prescrites dans la présente fiche technique, il risque de ne pas procurer le rendement prescrit aux présentes.
    plug-tite, 15 kgPhoto of productBloque les fuites deau provenant de fissures sur les surfaces de béton! Utilisez SAKRETE plug-tite, un ciment hydraulique à prise rapide et sans retrait. Offerts en contenants de 2 kg, de 5 kg et de 15 kg. Optez pour SAKRETE, le choix des professionnels depuis 1936.
    SAKRETE
    1000109195
    plug-tite, 15 kg est évalué 5.0 de 5 de 1.
    • y_2019, m_10, d_19, h_11
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_fr_CA, sid_1000109195, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 103ms
    • REVIEWS, PRODUCT
    Rated 5 de 5 de par Excellent Product I had been dealing with a water seepage problem in my basement foyer area, it is an addition to the house and provides access to a basement apartment. Water was coming in through the joints, where the wall and floor meet, as well as where the addition meets the house. This product worked fantastic! At times I had to change the consistency of product to water because I had so much water coming in that I directly added the product to the area and then added pressure to the area until it hardened. I must admit, I had my doubts that I could fix the water problem myself but I did at a low cost and with incredible results. I strongly recommend this product to anyone that has problem or something similar.
    Date de publication: 2011-03-12
    • y_2019, m_10, d_19, h_11
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_fr_CA, sid_1000109195, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 31ms
    • REVIEWS, PRODUCT

    I am applying Plug-tite to exterior foundation wall that is leaking. To improve long term waterproofing, I will apply rubberized membrane over top of patch (Blueseal by Bakor). Is rubberized membrane classified as a paint and I have to wait 28 days?

    Posée par: johnnyg
    Thank you for your inquiry. Your question Is rubberized membrane classified as a paint and I have to wait 28 days?|||| REPLY- this question is best answered by the membrane supplier. |||| I can only suggest the working outdoors in a ventilated area and the repair holes are small than you should be ok to proceed. |||| The SAKRETE plug-tite TDS is available at the link: http://www.kpmindustries.com/KingHomeImprovementProducts/wp-content/uploads/sites/12/2014/02/SAKRETE-plug-tite-TDS-ENG-REV.0004.pdf. ||||| As for waterproofing bare concrete surfaces you may wan to research using KING Xypex high’n dry.|||| Product info is available at: http://www.kpmindustries.com/KingHomeImprovementProducts/product/king-xypex-highn-dry/. |||| KING Xypex high'n dry is a surface applied chemical treatment for concrete designed to prevent water seepage due to hydrostatic pressure. The application produces a non-soluble crystalline growth within the pores of the concrete. This crystalline formation penetrates deep into the damp concrete becoming a permanent part of the structure and effectively seals it against water seepage. FEATURES & BENEFITS • Permanent waterproofing • Interior or exterior application • Easy to apply USES Ideal for waterproofing bare concrete surfaces such as basement walls, floors, tunnels, storage tanks, cisterns, ponds and swimming pools. PROCEDURES Mix and substrate temperatures should be maintained between 5 ºC and 30 ºC (40 ºF and 86 ºF) for at least 24 hours prior to and 48 hours after. Surface Preparation: Surfaces to be coated must be structurally sound and clean. Remove all delaminated or unsound concrete by chipping with a hammer and chisel or using a stiff wire brush. Clean the surface of dirt, grime, mold or any other substance that would prevent the penetration of the crystalline growth. Remove all paint. Smooth concrete must be lightly roughened or etched. Repair all cracks and holes with SAKRETE plug-tite. Clean the area with potable water, leaving the concrete saturated but free of standing water. Some very porous concretes may require several applications of water to ensure complete saturation. Mixing: Mix 5 parts of KING Xypex high'n dry with 2 parts of clean water until a creamy consistency is obtained; avoid a “soupy” mix. Mix only as much as can be applied within 10 minutes. Use immediately after mixing. If mix starts to set, agitate briefly but do not add more water. Placing: After mixing, apply KING Xypex high'n dry to prepared surface with a semi-stiff, thick bristle brush. Always dip the brush to the bottom of the mixing pail, mixing as you obtain more material to ensure that the solids do not settle. If the mixture thickens, simply re-agitate, do not add more water. In cases of strong hydrostatic pressure it may be necessary to apply more than one coat. CURING The presence of moisture is most important to produce the crystalline growth within the concrete and proper hardening of the coating. Allow KING Xypex high'n dry to set until the surface is hard to the touch approximately 1-2 hours. The treatment must be kept damp for 48 hours following application. Under normal conditions, it is sufficient to fog spray the coating 3 times a day for a minimum of 2 days. This also prevents the chalking or dusting of the coating. NOTE: For concrete structures that hold water (ponds, swimming pools, etc.) keep damp for 3 days, then allow to set (air cure) for 12 days. Flush thoroughly before filling. In hot weather above 21 °C (70 °F) care must be taken to prevent the coating from drying too quickly. Dampen the coating more frequently during the curing process than would be required under normal conditions.
    Répondue par: King Packaged Materials
    Date de publication: 2019-06-17

    Can you paint over this product?

    Posée par: Anonyme
    PAINTING Allow 28 days before applying paint.
    Répondue par: King Packaged Materials
    Date de publication: 2014-07-30

    what colour is the material when dry

    Posée par: Anonyme
    Dark grey
    Répondue par: Wendy1972
    Date de publication: 2017-09-01

    How many feet will this pail cover?

    Posée par: Anonyme
    It depends on the severity of the leak. My room was 6' by 6' perimeter and I used an entire large pail of instant plug, but I had areas where I required 8 to 10tablespoons of product for an area to stop the leak.
    Répondue par: Wendy1972
    Date de publication: 2017-09-01

    Concrete foundation has 'honeycombed' in area 3 1/2" d x 5" h x 7" w. All loose material has been chiseled away and hole is clean.What is maximum size of hole in concrete that can be repaired at one time? should I do it a couple of layers?

    Posée par: johnnyg
    • y_2019, m_10, d_19, h_11CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_5
    • loc_fr_CA, sid_1000109195, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 135ms
    • QUESTIONS, PRODUCT
    <?xml version="1.0" encoding="utf-8"?>