• Panier
  • NOS PRIX SONT IMBATTABLES NOUS LE GARANTISSONS.Certaines conditions s’appliquent

    SAKRETE Top'N Bond, 20 Kg

    Modèle nº 12011020|Nº UGS 1000109128

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # 12011020 Internet # 1000109128

    Redonnez aux vieilles surfaces de béton une apparence neuve! Utilisez SAKRETE topn bond, un mélange de ciment modifié aux polymères à ladhérence supérieure. Offert en contenants de 2 kg et de 5 kg, et en sacs de 20 kg. Optez pour SAKRETE, le choix des professionnels depuis 1936.

    1. Ciment autoliant de première qualité pour réparer et lisser le béton usé ou effrité
    1. Adhère au béton existant pour des réparations qui durent
    1. Indiqué pour lisser, réparer ou refaire les surfaces en béton
    1. Appliquer en couches minces ou dune épaisseur allant jusquà 1/2 po (1,25 cm)
    1. Son adhérence est de 8 à 10 fois supérieure aux mélanges de ciment ordinaires
    1. Permet la circulation piétonne légère après 12 à 24 heures, ou la circulation lourde après 48 heures

    Spécifications

    Dimensions

    Hauteur assemblé
    20
    Hauteur de l’emballage (en pouces)
    20
    Largeur assemblée
    12
    Largeur de l’emballage (en pouces)
    12
    Poids assemblé
    44
    Poids de l’emballage (en livres)
    44
    Profondeur assemblé
    12
    Profondeur de l’emballage (en pouces)
    12

    Détails

    Matériau du pied de lampe
    Béton
    Pays d'origine
    CA-Canada
    Temps de séchage (h)
    12
    Type
    Encastré
    Utilisation suggérée
    Tout usage

    Garanties et certifications

    Ce produit est conçu pour procurer le rendement prescrit dans la présente fiche technique. Si toutefois il est utilisé dans des conditions autres que celles pour lesquelles il est destiné, ou sil est utilisé dune façon contraire aux recommandations prescrites dans la présente fiche technique, il risque de ne pas procurer le rendement prescrit aux présentes.
    Top'N Bond, 20 KgPhoto of productRedonnez aux vieilles surfaces de béton une apparence neuve! Utilisez SAKRETE topn bond, un mélange de ciment modifié aux polymères à ladhérence supérieure. Offert en contenants de 2 kg et de 5 kg, et en sacs de 20 kg. Optez pour SAKRETE, le choix des professionnels depuis 1936.
    SAKRETE
    1000109128
    Top'N Bond, 20 Kg est évalué 3.7 de 5 de 3.
    • y_2020, m_1, d_26, h_12
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_fr_CA, sid_1000109128, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 80ms
    • REVIEWS, PRODUCT
    Rated 2 de 5 de par Had big hard chunks in the bags I bought several bags to level the floor in my basement. Half of the bags had hard chunks in it ranging in size from a piece of corn up to marble-sized. Before I mixed it I would have to reach in the bucket and try and smash up all the big chunks that I could. The bags that did not have any chunks in it worked very well and was very easy to use.
    Date de publication: 2019-10-29
    Rated 4 de 5 de par Good product Good product. Used about 40 bags so far with no problem.
    Date de publication: 2019-08-22
    Rated 5 de 5 de par Easy to use I've never used any concrete product before and didn't know what to expect. I used Top n' Bond to skim coat my cold room walls after viewing You Tube videos on how to do it. Once I had the water to powder ratio for my application it was looks great, ease and simple to use.
    Date de publication: 2018-09-07
    • y_2020, m_1, d_26, h_12
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_fr_CA, sid_1000109128, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 20ms
    • REVIEWS, PRODUCT

    How thick do I apply it to resurface my sidewalk?

    Posée par: GM123
    SAKRETE top’n bond is a polymer modified, pre-blended, ready-to-use, cement mixture with superior bonding, specifically designed for repairing concrete quickly and easily. Forms a bond that is 8 to 10 times stronger than that of regular cement mix. Use for concrete repairs from a feather-edge up to 1/2 inch (1.25 cm) thick. Open to light foot traffic in 12 to 24 hours, and heavy traffic after 48 hours. Deep repairs, exceeding 1/2 inch (1.25 cm): After leveling off the initial layer at 1/2 inch (1.25 cm), rough-up the surface with a coarse broom and allow to harden for 24 hours. Repeat the process until the desired thickness is reached. Surface Preparation: Surfaces to be repaired must be structurally sound and clean. Remove all delaminated or unsound concrete by chipping with a hammer and chisel, or by using a stiff wire brush. Clean the area to be repaired with potable water, leaving the concrete saturated but free of standing water. Some very porous concretes may require several applications of water to ensure complete saturation. Mixing: Empty contents into mixing container. Add approximately 140 mL (4.75 oz) of clean water per 1 KG (2.2 lb) or enough to achieve a workable mix. Mix only the amount that can be used in 30 minutes. Avoid a soupy mix. Excess water reduces strength and durability and can cause cracking. In cold weather, use warm water to accelerate the set. In hot weather, use cold water to slow the set. NOTE: Concrete bonding agents are not recommended with SAKRETE top’n bond. Placing: Shallow repairs up to 1/2 inch (1.25 cm): After mixing, trowel in a thin layer to the prepared dampened surface, forcing mix into the pores of the old concrete. Then, immediately spread more material to the required thickness, and level off. Deep repairs, exceeding 1/2 inch (1.25 cm): After leveling off the initial layer at 1/2 inch (1.25 cm), rough-up the surface with a coarse broom and allow to harden for 24 hours. Repeat the process until the desired thickness is reached. Finishing: Level off the repair at the desired thickness and finish smooth with a dampened trowel. For a textured surface, use a broom or brush. CURING Curing means maintaining proper moisture and temperature. Because of high water retention properties, SAKRETE top’n bond requires no special curing under normal conditions. When exposed to high heat or direct, hot sunlight, cover the patched area with a plastic sheet for 24 hours. Do not wet the surface with water after troweling operation has been completed. Substrate temperatures should be maintained between 5 ºC and 30 ºC (40 ºF and 86 ºF) for at least 24 hours prior to and 48 hours after. TDS is available at: http://www.kpmindustries.com/KingHomeImprovementProducts/wp-content/uploads/sites/12/2014/02/SAKRETE-topn-bond-TDS-ENG-REV.0004.pdf Thank you for your inquiry
    Répondue par: King Packaged Materials
    Date de publication: 2019-06-05

    I was wondering what the coverage is at 1/2 I nah thick

    Posée par: Otty83
    1 KG (2.2 lb) yields approximately 1 ft² at 1/4 inch or approximately 12" x 12" x 1/4" 1 KG (2.2 lb) yields approximately 0.5 ft² at 1/2 inch thick. or approximately 6" x 6" x 1/2" thick
    Répondue par: King Packaged Materials
    Date de publication: 2019-04-23

    could top,n bond be used to resurface a recycled asphalt driveway

    Posée par: Bill
    Thank you for your inquiry. SAKRETE top’n bond is not recommended to resurface a recycled asphalt driveway. SAKRETE top’n is ideal for repairing, smoothing or resurfacing concrete slabs, driveways, sidewalks, steps, walls or any worn, chipped or spalled concrete surface. It may also be used for setting dense surfaced stone, marble or slate, and as a setting bed for quarry tile, flagstone, brick or patio block units.
    Répondue par: King Packaged Materials
    Date de publication: 2019-04-16

    Ran a little short, how long until I can put another layer on and how long does it have to set before it gets rained on

    Posée par: Gord64
    You should be ok with the material setting for 12 hrs before it rains. 24 hours would be ideal. Apply additional layers, wait 24 hours between layers is best. Thank you for your inquiry.
    Répondue par: King Packaged Materials
    Date de publication: 2018-08-24

    Can this concrete/product be used for outdoor concrete chlorine pools to repair cracks and resurface if the dried finished surface will be submerged under chlorinated water?

    Posée par: dragonmorphs
    “yes” it will be ok to be exposed to chlorinated water. I would not recommend it in a salt water pool though. Make sure to follow the packaging instructions for application and curing. Further information (TDS) is also available at http://www.kpmindustries.com/KingHomeImprovementProducts/product/sakrete-topn-bond/ Thank you for your inquiry.
    Répondue par: King Packaged Materials
    Date de publication: 2018-08-24

    I need to repair a large horse concrete or cement statue. I need something that I can actual sculpt as there are parts missing. What would I use.

    Posée par: Shell
    Thank you for your inquiry. yes you could use SAKRETE top'n bond for this repair. A better option would be to use SAKRETE ShapeCrete http://www.kpmindustries.com/KingHomeImprovementProducts/product/sakrete-shapecrete/
    Répondue par: King Packaged Materials
    Date de publication: 2018-08-24

    Can I use top'n bond to resurface laminate countertop?

    I knew I have to sand the laminate countertop to improve the adhesif, but I wonder if I can cover it directly with top'n bond product?
    Posée par: Anonyme
    No, you cannot resurface laminate with the Top N Bond.
    Répondue par: Sakrete Customer Care
    Date de publication: 2018-08-24

    can this be used to set a ceramic tile?

    Posée par: Anonyme
    yes it could be used. Do a small test first. top’n bond is a polymer modifi ed, pre-blended, ready to use cement mixture with superior bonding specifi cally designed for repairing concrete quickly and easily. Forms a bond that is 8 to 10 times stronger than that of regular cement mix. Use for concrete repairs from a feather edge up to 1.25 cm (1/2 inch) thick. Open to light foot traffi c in 12 to 24 hours and heavy traffi c after 48 hours. FEATURES & BENEFITS • sticks to existing concrete • feather edges easily • high strength • just add water USES Ideal for repairing, smoothing or resurfacing concrete slabs, driveways, sidewalks, steps, walls or any worn, chipped or spalled concrete surface. It may also be used for setting dense surfaced stone, marble or slate and as a setting bed for quarry tile, fl agstone, brick, patio block units, etc.
    Répondue par: King Packaged Materials
    Date de publication: 2018-08-24
    • y_2020, m_1, d_26, h_12CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_11
    • loc_fr_CA, sid_1000109128, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 98ms
    • QUESTIONS, PRODUCT