Veuillez attendre de recevoir un courriel indiquant que votre commande est prête à être ramassée avant de vous rendre au magasin.  En savoir plus

SharkBite Adaptateur femelle PEX à souder, 3/4 x 3/4 po

Modèle nº UC606LFCA|Nº UGS 1001012277

Aperçu

Modèle # UC606LFCA Internet # 1001012277

Ladaptateur femelle en laiton cannelé à souder de SharkBite de 3/4 pouces est le choix idéal pour votre prochain projet de plomberie. Cet adaptateur peut être utilisé avec les tuyaux en PEX (non compris) et résiste à la corrosion.

  1. Construction en laiton sans plomb résistant à la dézincification pour une durabilité et une fiabilité accrues
  1. Système de raccordement économique pour réseaux de plomberie
  1. Répond aux normes de l'UPC, l'IPC et du cUPC
  1. Compatible avec les tuyaux en PEX
  1. Homologué NSF
  1. Homologué à 200 °F et 200 psi

Spécifications

Dimensions

Hauteur assemblé
6.50
Hauteur de l’emballage (en pouces)
1.024
Largeur assemblée
4.50
Largeur de l’emballage (en pouces)
4.5
Poids assemblé
1.26
Poids de l’emballage (en livres)
0.105
Profondeur assemblé
10.75
Profondeur de l’emballage (en pouces)
7

Détails

Entretien des installations
Non
Matériau
Laiton
Pays d'origine
AU-Australia
Raccord
Raccord cannelé
Type de raccord
Adaptateur
Utilisation
Eau potable

Garanties et certifications

Pour en savoir plus sur la garantie offerte pour ce produit, veuillez contacter notre centre de service à la clientèle en ligne au 1-888-820-0120. 
Adaptateur femelle PEX à souder, 3/4 x 3/4 poSharkBite Adaptateur femelle PEX à souder,  3/4 x 3/4 poLadaptateur femelle en laiton cannelé à souder de SharkBite de 3/4 pouces est le choix idéal pour votre prochain projet de plomberie. Cet adaptateur peut être utilisé avec les tuyaux en PEX (non compris) et résiste à la corrosion.
SharkBite
1001012277
Adaptateur femelle PEX à souder, 3/4 x 3/4 po est évalué 2.9 de 5 de 14.
  • y_2021, m_1, d_25, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_fr_CA, sid_1001012277, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 80ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par THOSE COMPLAINING JUST PLAIN SUCK! These people shouldnt be soldering! These fittings are industry standard and if they leak, its either joint prep or heat control. Ive been a plumber for twenty years as much as i hate to see this stuff ruin the quality of plumbing systems, its not these fittings fault. They are industry standard. These types of systems give a home owner the illusion that its easy and they can do it themselves but the truth is that it still takes some basic mechanical ability
Date de publication: 2019-01-26
Rated 5 de 5 de par Worked as expected... Worked as expected
Date de publication: 2018-03-20
Rated 5 de 5 de par I was reluctant to purchase this item after reading a couple these reviews. I tried using the wat... I was reluctant to purchase this item after reading a couple these reviews. I tried using the water base flux and with poor results. So, I Switched over to petroleum based flux and life was good again. I used MAPP Gas. Propane is a waste of time! I heard some friends and local plumbers using Acetylene (without oxygen) though I haven’t needed to go that route.
Date de publication: 2017-10-18
Rated 1 de 5 de par Garbage! I Sweat this on and did a pressure test and it leaked like a sieve. Had to run back to HD and buy copper fittings instead. Don't buy this, get the copper threaded fitting and do it right!
Date de publication: 2017-06-30
Rated 5 de 5 de par I used these a couple weeks ago and had no problems at all... Great product! I'm a DIY person. I used these a couple weeks ago and had no problems at all... Great product! I'm a DIY person.
Date de publication: 2017-01-30
Rated 1 de 5 de par Useless!!! I've been in plumbing bussines for over 15 years and never had problems sweating copper but this product just doesn't work with copper! Had to do few of them none would work, all leaked. Who makes this stuff and release it to the market? It's borderline criminal.
Date de publication: 2016-08-30
Rated 5 de 5 de par Good fitting -- no problem I have installed a couple of these 3/4 inch adapters recently, and a half dozen of the 1/2 inch size. I had no problem sweating them. I wire brushed both surfaces and used a good flux. Oatey No. 95 petroleum-based tinning flux worked great, but I also had good results with Oatey's H2O-95 water-based tinning flux. The latter is less forgiving and more difficult to use, but eliminates the insoluble sludge inside the pipe and is easier to clean up on the outside. I used Oatey Safe Flo lead free solder. I was able to test all of these sweat assemblies with air before installing in my house. All of them had no detectable air loss, 2 hrs at 100 psi. After installing in my house, I did not have one drop of water leak out either end of these adapters at roughly 60 psi. Great Results! I'm a DIY'er.
Date de publication: 2016-08-06
Rated 1 de 5 de par DO NOT BUY THESE!! The only problem with PEX sweat adapters is that they do not sweat adapt. All of my copper to copper joints solder with ease. So do the copper to brass outdoor faucet joints. But try and try and try again and there is no luck with either of the PEX sweat adapters. Use a copper pipe thread adapter instead. I wish I had saved myself the time, money, and frustration. Horrible product...
Date de publication: 2016-07-30
  • y_2021, m_1, d_25, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_fr_CA, sid_1001012277, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 82ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;