L’événement Les journées Milwaukee est en cours. N’attendez pas!  Magasiner maintenant

Aperçu

Modèle # UR370CA Internet # 1000792340

Les raccords à insertion SharkBite Max sont la solution facile pour raccorder les tuyaux en PEX, cuivre, PVC-C, PE-RT ou PEHD. Avec leur nouveau collet de retenue innovateur en acier inoxydable, les raccords SharkBite Max offrent une résistance et une durabilité accrues avec une pression nominale de 250 psi. Leur corps spécialement conçu permet d'insérer les tuyaux sans effort et n'exige pas l'utilisation de renforts pour PEX. L'installation se fait sans soudage, brides de serrage, raccords-union, colle, ni outils spéciaux. Il suffit d'insérer le tuyau et les dents en acier inoxydable « mordent » pour assurer un raccordement solide, tandis qu'un joint torique spécialement conçu se compresse pour une étanchéité à toute épreuve. Même une fois assemblés, il est possible de les faire tourner pour modifier l'installation. Le désaccouplement est tout aussi rapide grâce à l'outil de désaccouplement facile les raccords et les vannes peuvent ainsi être facilement changés et réutilisés.

  1. Réparation rapide des tuyaux en PEX, cuivre, PVC-C, PE-RT et PEHD
  1. Collet de retenue résistant en acier inoxydable, homologué pour une pression de 250 psi
  1. Raccordement facile et insertion sans effort
  1. Aucun renfort pour PEX requis
  1. Homologué à 93 °C et 250 psi
  1. Garantie de 25 ans si installé avec des tuyaux en PEX, en cuivre, en PVC-C et en PE-RT; voir garantie

Spécifications


Matériau

Laiton


Méthode de raccordement

Raccord instantané


Type de raccord

Raccord en T

Dimensions

Hauteur assemblé (en pouces)
6.5
Hauteur de l’emballage (en pouces)
0.53
Largeur assemblée (en pouces)
4
Largeur de l’emballage (en pouces)
1.77
Poids assemblé (en livres)
0.4
Poids de l’emballage (en livres)
0.36
Profondeur assemblé (en pouces)
1.4
Profondeur de l’emballage (en pouces)
2.76

Détails

Certifié
Dimensions de lemballage
1
Matériau
Laiton
Méthode de raccordement
Raccord instantané
Nombre d'articles dans l'emballage
1
Pays d'origine
US-United States
Taille
3/4
Taille du raccord (en po)
1/2"
Type de raccord
Raccord en T
Utilisation
Eau potable, Alimentation d'eau
Utiliser avec
Eau propre

Garanties et certifications

1-888-820-0147
Té à insertion en laiton, 3/4 poSharkBite Max Té à insertion en laiton, 3/4 poLes raccords à insertion SharkBite Max sont la solution facile pour raccorder les tuyaux en PEX, cuivre, PVC-C, PE-RT ou PEHD. Avec leur nouveau collet de retenue innovateur en acier inoxydable, les raccords SharkBite Max offrent une résistance et une durabilité accrues avec une pression nominale de 250 psi. Leur corps spécialement conçu permet d'insérer les tuyaux sans effort et n'exige pas l'utilisation de renforts pour PEX. L'installation se fait sans soudage, brides de serrage, raccords-union, colle, ni outils spéciaux. Il suffit d'insérer le tuyau et les dents en acier inoxydable « mordent » pour assurer un raccordement solide, tandis qu'un joint torique spécialement conçu se compresse pour une étanchéité à toute épreuve. Même une fois assemblés, il est possible de les faire tourner pour modifier l'installation. Le désaccouplement est tout aussi rapide grâce à l'outil de désaccouplement facile les raccords et les vannes peuvent ainsi être facilement changés et réutilisés.
SharkBite Max
1000792340
Té à insertion en laiton, 3/4 po est évalué 4.8 de 5 de 289.
  • y_2024, m_7, d_15, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_101, tr_188
  • loc_fr_CA, sid_1000792340, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 18ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Great for temporary connections... ...and apparently for permanent ones too. I understand that the UPC now allows these fittings to be used inside walls in permanent installations. I am using a pair of these tees to make a temporary connection from my old copper water system to my new PEX system. When I am finished cutting out the old copper, I will relocate my water heater and run new lines to my PEX manifold and from the city's main supply line, and connect those with permanent barbed fittings and crimp rings. But in the meanwhile, these do a great job. They went in VERY quickly and there has been no sign of any leakage.
Date de publication: 2013-11-17
Rated 5 de 5 de par great product I was doing a plumbing project , installing a new UV light and a house water filter housing and saw the benefits of using Sharkbite products.With all Sharkbite products the pipe inside will spin and I will be able to swivel my UV canister away from the wall and remove it if would need replacement .After installing everything I didn't have enough teflon tape on the threads causing a leak and had to remove the UV unit and yes it did swivel away from its hold down brackets so I could reseal the threads .
Date de publication: 2016-01-24
Rated 5 de 5 de par Easy connection These push-fit fittings are great and easy to use. They will speed up installation. I used it to connect my existing CPVC with the new PEX tubing and it was a very simple installation. They are a little more costly but are worth the money.
Date de publication: 2012-09-11
Rated 5 de 5 de par This product was super easy to use. It's also very easy to disconnect and reconnect if need be. I... This product was super easy to use. It's also very easy to disconnect and reconnect if need be. I highly recommend this for pipe replacement or new additions.
Date de publication: 2018-04-25
Rated 5 de 5 de par Excellent product. No retainer ring to forget that other similar fittings require and simple to install.
Date de publication: 2014-10-07
Rated 5 de 5 de par Expensive but ease of install is worth it Very easy to install. Wish more stores carried lead free in the store.
Date de publication: 2012-07-10
Rated 5 de 5 de par Using SharkBite is outstanding Sharkbite push on connectors are excellent. SharkBite eliminates soldering, plus speeds up the project. They are used for connecting copper to copper, Pex to copper, Pex to Pex. For over twelve years none of my SharkBite leaked nor failed. Last week we installed a replacement water heater; for the water lines SharkBite was used. On a side note, the white plastic insert is not needed for copper to copper, however, whichever side connects to Pex you must leave the plastic, it provides rigidity for the Pex.
Date de publication: 2022-12-08
Rated 5 de 5 de par Great product! Saves the day alot !!! We are on a older property and we use these quite frequentl... Great product! Saves the day alot !!! We are on a older property and we use these quite frequently.... It is awesome and does not fail us.
Date de publication: 2020-02-04
  • y_2024, m_7, d_15, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_101, tr_188
  • loc_fr_CA, sid_1000792340, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 16ms
  • REVIEWS, PRODUCT

I was going to the Sharkbite 3/4, 3/4, 3/4 Tee to add an additional water line for a sink. I noticed a direction arrow

Pointing in from the single 3/4 side. I want the water to flow out of the single side to my sink. Will that work
Posée par: JT
There is no directional arrow on the Tee, that is a shark emblem that we incorporate so we no it is our product. You can install the tee however you need for your installation. If you have further questions, please contact Customer Service M-F, 8am-5pm at (877) 700-4242.
Répondue par: RWC Support
Date de publication: 2023-05-04

Will this work with PVC? the incoming water line to my house is 3/4" schedule 40 PVC. i am loo...

Will this work with PVC? the incoming water line to my house is 3/4" schedule 40 PVC. i am looking to 'T' off of that and run PEX in opposite directions. just not sure if i can go PVC into the bottom of this T, and then PEX either direction.
Posée par: matt
Yes, it works with copper, pvc, cpvc and flex.
Répondue par: HomeDepotCustomer
Date de publication: 2023-05-05

i have 2 existing water lines cold & hot.  i would like to cut into them use the sharkbite tee to add cold & hot into a utility tun.  can i use this sharkbite tee for that?

Posée par: Ajax
SharkBite products as designed for PEX, copper, CPVC and PERT tubing to be used with potable water only, with a maximum temp. of 200 F and maximum pressure rating of 200 psi.
Répondue par: The Home Depot Canada
Date de publication: 2021-02-26

Can I use this fitting to run a PEX line from a Polybutylene (PB) line?

Can I use this fitting to run a PEX line from a Polybutylene (PB) line?
Posée par: ConnectorProblems
Hello, SharkBite part # U370LFA is not suitable for use with polybutylene tubing. If you have additional questions please don't hesitate to reach out to our technical support department at 877-700-4242. Best Regards,
Répondue par: RWC Support
Date de publication: 2023-05-06

How much do you have to cut the pipe you will be servicing for this to fit properly and how far does the pipe slip into the tee?

Posée par: umchong2
As per Sharkbite, the pipe insertion amount for 1/2 fittings is 15/16" or almost one inch. You'd have to cut accordingly to make this fit. They have another Tee fitting with a 'slip' end which would make the installation much easier. 
Répondue par: jackie2701
Date de publication: 2017-11-06

can it be direct buried

Posée par: IBRE
Hi, The SharkBite 3/4 in. Push-to-Connect Brass Tee can be buried. When burying any push-to-connect fitting you must wrap them in a silicone wrap. I've attached a link to the silicone wrap. If you have any more questions you can call tech support at 877-700-4242. (https://www.sharkbite.com/us/en/brass-push-to-connect/tools/silicone-wrap) (Kind regards,)
Répondue par: RWC Support
Date de publication: 2023-04-04

What is screw in cetera on 3/4 tee actually called.1

Posée par: JoeyDean
Hello, Your question is unclear. Please contact out technical support team at 877-700-4242 so we may assist. Regards,
Répondue par: RWC Support
Date de publication: 2023-10-09

Could this be used to connect a brass pipe with .84 in. outside diameter to a copper pipe with .875 in. outside diameter?

Posée par: ctokrat
HI, The SharkBite 3/4 in. Push-to-Connect Brass Tee can not be connected to Brass pipe. If you have any more questions you can call tech support at 877-700-4242. ()Kind regards,)
Répondue par: RWC Support
Date de publication: 2023-11-29
  • y_2024, m_7, d_15, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_fr_CA, sid_1000792340, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 33ms
  • QUESTIONS, PRODUCT