Articles pour l’extérieur et terrasses Climatisation et chauffage Cuisine Cuisson à l'extérieur et barbecues Décor et Meubles Électricité Électroménagers Gazon, pelouse et centre jardin Luminaires et ventilateurs de plafond Maison intelligente Matériaux de construction Organisation et entreposage Outils Peinture Plomberie Portes et fenêtres Produits nettoyants Quincaillerie Revêtements de sol Salle de bain Stores et habillages de fenêtre Terrasses, bois de consturction et composite Tous les départements Centre de cadeaux pour la fête des Pères ÉVÈNEMENT mobilier de jardin
Livraison en 3 heures à partir de 12,97 $*  En savoir plus
SharkBite Outil de désaccouplement et jauge de profondeur SharkBite pour PVC de 3/4 po.

SharkBite Outil de désaccouplement et jauge de profondeur SharkBite pour PVC de 3/4 po.

Modèle nº UIP712A|Nº UGS 1001701519

Aperçu

Modèle # UIP712A Internet # 1001701519

Loutil de désaccouplement et jauge de profondeur SharkBite pour PVC (IPS) de 3/4" est utilisé pour désaccoupler les raccords en PVC (IPS) de SharkBite des tuyaux en PVC de nomenclatures 40, 80 et 120. La bride de désaccouplement libère le raccord du collet blanc. La bride de désaccouplement pour PVC peut également être utilisée comme jauge de profondeur pour marquer le tuyau en PVC et sassurer que le raccord est inséré à une profondeur adéquate.

  1. Construction en laiton sans plomb résistant à la dézincification pour une durabilité et une fiabilité accrues
  1. Démontage rapide et facile avec la bride de désaccouplement
  1. Peut être utilisé pour marquer la profondeur dinsertion adéquate sur le tuyau
  1. Permet de libérer le collet blanc des raccords IPS SharkBite sur les tuyaux en PVC de nomenclatures 40, 80 et 120 et les tuyaux PVC-C de nomenclatures 40 et 80.
  1. Le collier beige s'adapte aux tubes en cuivre et CTS CPVC et PEX, le collier blanc s'adapte au PVC

Manuel

  1. p_1001701519_alt_RWC_Warranty_ EN
  2. p_1001701519_alt_RWC-Warranty- FR

Home Depot fournira sur demande un document PDF en version accessible. Veuillez nous contacter au
1-800-628-0525.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
0.27
Hauteur de l’emballage (en pouces)
0.22
Largeur assemblée (en pouces)
0.1
Largeur de l’emballage (en pouces)
0.06
Poids assemblé (en livres)
0.05
Poids de l’emballage (en livres)
0.05
Profondeur assemblé (en pouces)
0.09
Profondeur de l’emballage (en pouces)
0.04

Détails

Entretien des installations
Matériau
Plastique
Pays d'origine
US-United States
Raccord
Raccord instantané

Garanties et certifications

Pour plus d'informations sur la garantie de ce produit, veuillez appeler notre centre de service client Internet au 1-877-700-4242
Outil de désaccouplement et jauge de profondeur SharkBite pour PVC de 3/4 po.SharkBite Outil de désaccouplement et jauge de profondeur SharkBite pour PVC de 3/4 po.Loutil de désaccouplement et jauge de profondeur SharkBite pour PVC (IPS) de 3/4" est utilisé pour désaccoupler les raccords en PVC (IPS) de SharkBite des tuyaux en PVC de nomenclatures 40, 80 et 120. La bride de désaccouplement libère le raccord du collet blanc. La bride de désaccouplement pour PVC peut également être utilisée comme jauge de profondeur pour marquer le tuyau en PVC et sassurer que le raccord est inséré à une profondeur adéquate.
SharkBite
1001701519
CAD3.792023-06-04
Home Depot Canada
Outil de désaccouplement et jauge de profondeur SharkBite pour PVC de 3/4 po. est évalué 4.5 de 5 de 13.
  • y_2023, m_6, d_3, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_fr_CA, sid_1001701519, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 74ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par [This review was collected as part of a promotion.] These SharkBite disconnect clips are a must-have for anyone who works with SharkBite fittings. This particular clip is designed for use with PVC piping only. They are available in three sizes, 1/2 in., 3/4 in. and 1 in. When working with copper, PEX or CPVC use the orange models also available at Home Depot. Releasing an installed fitting is quite simple. Clip the tool onto the pipe (doesn't matter which side faces the fitting). Making sure the fitting does not move, slide the tool up to the disconnect collar and press the collar in. Once compressed, pull on the fitting. You may have to twist and turn to get it off.. These clips also provide a depth gauge to mark a pipe for the correct insertion depth. I did find a little ambiguity with these measurements. Under the heading FAQ they show the correct depth for 1/2 in. pipes as 15/16 in. but the gauge on the clip measures 1-1/8 in. Also the 3/4 in. clip is shown as 1-1/8 in. but the clip gauge measures 1-1/4 in. Which is correct? I'm inclined to believe the gauge on the clip. I was unable to locate any type of warranty information on this product but it's molded with a very strong plastic type material and I think it's pretty much unbreakable.
Date de publication: 2018-01-28
Rated 5 de 5 de par I really like this device made for disconnecting Shark Bite fittings. I use them for disconnecti... [This review was collected as part of a promotion.] I really like this device made for disconnecting Shark Bite fittings. I use them for disconnecting poly pipe plugs for pressure testing while concrete is being poured for in-floor radiant heating systems. It is nice for all use points of the Shark Bite because of the depth indicator for marking the pipe with a sharpie before inserting it into the fitting. You never have to be concerned that you have not shoved the poly pipe in far enough. Other than it is small and easy to misplace, the tool is perfect.
Date de publication: 2018-03-16
Rated 5 de 5 de par If you use SharkBite, these disconnect clips are a must-have item. If you only use ¾”, then this ... [This review was collected as part of a promotion.] If you use SharkBite, these disconnect clips are a must-have item. If you only use ¾”, then this is the way to go, otherwise get the 3-pack with each size. The white color indicates it’s for PVC, vs. the orange disconnect clip which is for copper fittings (the tan ring on the SharkBite fitting). White to white—it couldn’t be any easier. Here’s the link to the fittings you would use it on: https://www.homedepot.com/catalog/pdfImages/c6/c6435a58-6b28-4767-9394-8a63a630b5c0.pdf A few nice features of this clip—there’s a built-in marking guide to make sure you insert your PVC far enough, and the little hole on the disconnect is great for a cord to keep your disconnect handy, especially if you’re working in the dirt and drop it. It sounds silly, but it saves needing to put it back in your bag each time—just clip it on your belt and it stays handy when you’re mocking up and test fitting everything.
Date de publication: 2018-02-02
Rated 5 de 5 de par This 3/4 inch SharkBite disconnect clip is perfect. It has directions for when the crew forgets h... [This review was collected as part of a promotion.] This 3/4 inch SharkBite disconnect clip is perfect. It has directions for when the crew forgets how to use it, is small enough but large enough to stay in a tool box and not get lost, and it has something to hang onto when you use it. It works with PCV and Pex. It does the trick and does it well. I've had other disconnects that were too small, hard to hang onto. You could actually drill a hole in the handle and put it on a key ring with your other disconnects.
Date de publication: 2018-02-07
Rated 5 de 5 de par If you work with push on fittings and have ever had to remove one, you know how that is almost im... [This review was collected as part of a promotion.] If you work with push on fittings and have ever had to remove one, you know how that is almost impossible without the right tools. These disconnect clips allow you to release the fitting so you can reuse it or fix a mistake. With their larger grip surface these disconnect clips are easier to use than some other styles. It could be hard to use this model in very tight spaces, but usually they are great. Make sure to get ones for the most common pipe sizes.
Date de publication: 2018-01-30
Rated 4 de 5 de par Unless you are working with Sharkbite fittings for PVC this disconnect isn't for you. Most Shark... [This review was collected as part of a promotion.] Unless you are working with Sharkbite fittings for PVC this disconnect isn't for you. Most Sharkbite fittings work universally with PEX, copper, CPVC, etc. but NOT PVC. As a home handyman and not a plumber I was preparing to modify the plumbing to my hot water tank that uses Sharkbite fittings and PEX tubing and found this disconnect tool too large for what I needed. Obviously my fault for not reading the description carefully. Sharkbite fittings and PEX tubing are a great advance over sweating copper but you need to follow simple instructions. The illustrations on the back of this disconnect are OK but the written instructions are unreadable. I highly recommend going to Sharkbite.com and viewing/reading/downloading the material there.
Date de publication: 2018-02-07
Rated 5 de 5 de par This little tool disconnects SharkBite fittings and if you've never used one like this they they ... [This review was collected as part of a promotion.] This little tool disconnects SharkBite fittings and if you've never used one like this they they are a absolute must in the old tool box. the last plumbing job I did it took me nine trips to the store to try and figure out the right stuff to get. After discovering SharkBite fittings I guess there's others out there but it's what I used, it became a one-and-done extremely easy No Mess no fuss no bother no hassle just quick water tight fit.
Date de publication: 2018-02-07
Rated 4 de 5 de par I've used Sharkbite fittings for years in every DIY plumbing project that requires hot and cold w... [This review was collected as part of a promotion.] I've used Sharkbite fittings for years in every DIY plumbing project that requires hot and cold water fittings. They save time and don't leak. However, it's always been frustrating when it's necessary to remove the fitting from the pipes for whatever reason. The small orange removal tool has always been difficult at best for me to use. This new IPS disconnect clip makes removing a Sharkbite fitting much easier and a lot less frustrating.
Date de publication: 2018-03-01
  • y_2023, m_6, d_3, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_fr_CA, sid_1001701519, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

HOME DEPOT describes this product as UIP712A. SHARKBITE seemingly only has a UIP712. Is this th...

HOME DEPOT describes this product as UIP712A. SHARKBITE seemingly only has a UIP712. Is this the same product or a variation? What does the A stand for?
Posée par: Anonyme
Same tool
Répondue par: 59ona64
Date de publication: 2023-05-05

Can this tool be used to remove the sharkbite support liners from the fitting? I am attaching to...

Can this tool be used to remove the sharkbite support liners from the fitting? I am attaching to copper pipe so the support fitting is an unnecessary restriction that should be removed first. Will this work or do I need the pliers-type tool instead to remove the support liners?
Posée par: carverdiyer
Hello, SharkBite disconnect clip model # UIP712A is intended for use with SharkBite PVC fittings (white release collar) which do not contain support liners. SharkBite model # U712A (SKU # 941656) can be used to help remove the support liners from standard 3/4" SharkBite fittings that will have tan colored release collars. The disconnect clip is used to push in the fitting's release collar. Once the release collar is pushed in a clean pair of needle nose pliers can be used to pull the support liner from the fitting. If you have additional questions please don't hesitate to reach out to our technical support department at 877-700-4242. Best Regards,
Répondue par: RWC Support
Date de publication: 2023-05-07
  • y_2023, m_6, d_3, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_1001701519, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 97ms
  • QUESTIONS, PRODUCT