L’événement Les journées Milwaukee est en cours. N’attendez pas!  Magasiner maintenant

Aperçu

Modèle # UP058CA5 Internet # 1001013226

Le raccord en PEX cannelé de SharkBite (paquet de 5) est une solution simple et économique pour raccorder les tuyaux en PEX. Fabriqués à partir de polymères de formule améliorée, ces raccords sont une solution idéale pour les endroits où des raccords en laiton résistants à la dézincification seraient sujets à la corrosion. Les raccords en plastique PEX cannelés de SharkBite conviennent aux applications de distribution deau potable et de chauffage hydronique. Ces raccords en PEX peuvent être utilisés avec le système de bagues de serrage en acier inoxydable ou le système de bagues de sertissage en cuivre (vendus séparément). La gamme de produits en PEX cannelés de SharkBite comprend un vaste éventail de raccords, collecteurs, robinets, bagues de serrage, bagues de sertissage et outils de différentes dimensions pour vous aider à mener à bien votre prochain projet de plomberie.

  1. Construction en polysulfone
  1. Certifié sans plomb et résistant à la corrosion
  1. Répond aux normes de l'UPC, l'IPC et du cUPC
  1. Compatible avec les tuyaux en PEX
  1. Répond aux normes NSF 61, ASTM F 877 et CSA 137.5
  1. Homologué à 200 °F et 200 psi

Spécifications


Matériau

Plastique


Méthode de raccordement

Raccord cannelé


Type de raccord

Manchon


Type de PEX

PEX A, PEX B, PEX C

Dimensions

Hauteur assemblé (en pouces)
6.50
Hauteur de l’emballage (en pouces)
0.75
Largeur assemblée (en pouces)
4.50
Largeur de l’emballage (en pouces)
4.19
Poids assemblé (en livres)
0.69
Poids de l’emballage (en livres)
0.05
Profondeur assemblé (en pouces)
10.75
Profondeur de l’emballage (en pouces)
7.62

Détails

Dimensions de lemballage
5
Matériau
Plastique
Méthode de raccordement
Raccord cannelé
Pays d'origine
AU-Australia
Taille du raccord (en po)
3/4"
Type de PEX
PEX A, PEX B, PEX C
Type de raccord
Manchon
Utilisation
Eau potable, Alimentation d'eau
Utiliser avec
Eau propre

Garanties et certifications

Pour en savoir plus sur la garantie offerte pour ce produit, veuillez contacter notre centre de service à la clientèle en ligne au 1-888-820-0120.
Raccord de réduction pour tuyaux en PEX, plastique, 3/4 po x 1/2 po - 5/paq.SharkBite Raccord de réduction pour tuyaux en PEX, plastique, 3/4 po x 1/2 po - 5/paq.Le raccord en PEX cannelé de SharkBite (paquet de 5) est une solution simple et économique pour raccorder les tuyaux en PEX. Fabriqués à partir de polymères de formule améliorée, ces raccords sont une solution idéale pour les endroits où des raccords en laiton résistants à la dézincification seraient sujets à la corrosion. Les raccords en plastique PEX cannelés de SharkBite conviennent aux applications de distribution deau potable et de chauffage hydronique. Ces raccords en PEX peuvent être utilisés avec le système de bagues de serrage en acier inoxydable ou le système de bagues de sertissage en cuivre (vendus séparément). La gamme de produits en PEX cannelés de SharkBite comprend un vaste éventail de raccords, collecteurs, robinets, bagues de serrage, bagues de sertissage et outils de différentes dimensions pour vous aider à mener à bien votre prochain projet de plomberie.
SharkBite
1001013226
Raccord de réduction pour tuyaux en PEX, plastique, 3/4 po x 1/2 po - 5/paq. est évalué 4.9 de 5 de 13.
  • y_2024, m_7, d_17, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_12
  • loc_fr_CA, sid_1001013226, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 49ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par A quality alternative to copper or galvanized pipe for water plumbing systems. A reducer is ofte... [This review was collected as part of a promotion.] A quality alternative to copper or galvanized pipe for water plumbing systems. A reducer is often an additional cost savings technique to scale down size of valves or other fittings if full flow is not needed. Scaling up, or using this fitting as an “increaser” is often required to keep proper flow. Keep in mind that 3/4 inch PEX pipe is about the same internal diameter as 1/2 inch galvanized. Barbed fittings are smaller diameter yet, since they fit inside the pipe. It is a good idea to properly size your system if you are installing any length of pipe or doing a large project. Good price for a quality fitting, and readily available.
Date de publication: 2019-01-10
Rated 5 de 5 de par [This review was collected as part of a promotion.] These things can be a time saver as well as a quick way to do repairs. I got a couple packs of these in different variations. The sizes I got were for rubber hose repairs and to make longer lengths as well as attach a barbed end adapter for some machinery.. So far so good even with some hot water running thru some they perform as I expected. Just used the last of them for a sump pump hose I actually use at home in a sink that tends to overflow during heavy rain storms. Saved me from having to wet vac the floor this last storm.
Date de publication: 2018-12-17
Rated 5 de 5 de par I really like these as they not only can be used as they are marketed for PEX tubing, but with an... [This review was collected as part of a promotion.] I really like these as they not only can be used as they are marketed for PEX tubing, but with any water tubing project around the house. Rated to 200°F and 200 psi, I have used these to repair my pond aerator air tubing after chasing out the Snapping turtle that was chewing through the air lines. As a matter of fact, I like these fittings more as they are less expensive than the old alternative splices and there's five in a pack. I have also used these for my garden water aeration system. Affordable, durable and flexible.
Date de publication: 2018-12-09
Rated 5 de 5 de par [This review was collected as part of a promotion.] The 3/4 in. x 1/2 in. Plastic PEX Barb Reducer Coupling is an excellent fitting. The body of the fitting as well as both ends have a great finish, no sharp ends or burrs. Provides a good tight connection. I have specified and used this type of fitting for many years. I am now retired and spend most of my time in my yard and garden.Sometimes it is necessary to bring water to areas where the sprinklers just don't reach, vinyl tubing and barbed, threaded or compression fittings are perfect to reach these goals. Yes, I like and recommend these fittings. Ref: https://www.homedepot.com/p/SharkBite-3-4-in-x-1-2-in-Plastic-PEX-Barb-Reducer-Coupling-5-Pack-UP058A5/206133156
Date de publication: 2019-01-05
Rated 5 de 5 de par Here is another new arrival for my waterline replacement project, 3/4 X 1/2 In. Plastic PEX Barb ... [This review was collected as part of a promotion.] Here is another new arrival for my waterline replacement project, 3/4 X 1/2 In. Plastic PEX Barb Reducer five pack, by SharkBite. I am on a well system and the water pressure is fairly low. So all of the under the house runs are 3/4 in PEX, reduced to 1/2 in. PEX near the risers, and above the floor. Simply cut the PEX tubing squarely, slip on the crimp ring, and crimp with the appropriate crimping tool, Quick, simple, and clean. Another fine product from SharkBite.
Date de publication: 2019-01-09
Rated 5 de 5 de par The Shark Bite PEX plastic barb reducing coupling is probably the best plastic coupling you can g... [This review was collected as part of a promotion.] The Shark Bite PEX plastic barb reducing coupling is probably the best plastic coupling you can get. Its quality appears to be excellent with no sharp edges or barbs left over from the molding process. They install just like brass couplings and I would use them as an alternate to the brass as desired. Theres just not a lot you can say about plastic plumbing fittings, but if you're going to use plastic, use the best, like Shark Bite.
Date de publication: 2018-12-08
Rated 5 de 5 de par PEX 3/4 inch to 1/2 inch plastic barbed reducing couplings are great to use when installing new P... [This review was collected as part of a promotion.] PEX 3/4 inch to 1/2 inch plastic barbed reducing couplings are great to use when installing new PEX tubing for new installations or retrofitting old work. I prefer the plastic fittings when installing PEX plumbing in my home. I have found that the brass fittings get calcification building up, and begin to plug-up within a year or so after installing them. That doesn't seem to happen with the plastic fittings.
Date de publication: 2018-12-31
Rated 5 de 5 de par Was putting up a sprinkler for my lawn and needed couple of these couplings to join and split the... [This review was collected as part of a promotion.] Was putting up a sprinkler for my lawn and needed couple of these couplings to join and split the lines. These look good, fit well and i like the flexibility to have these to be able to cover all the vegetable garden and rest. I would certainly recommend these. Make sure you are looking for this exact sizes, coz my neighbor bought the same and they didn't fit his.
Date de publication: 2019-01-10
  • y_2024, m_7, d_17, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_12
  • loc_fr_CA, sid_1001013226, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 29ms
  • REVIEWS, PRODUCT

Does this measure a true 3/4” on the large barb side?

Posée par: James
The barb fittings are installed inside the pipe, so the measurement is true to the inside diameter of the pipe, not the outside. If you have further questions about our products, please contact Customer Service M-F, 8am-5pm at (877) 700-4242.
Répondue par: RWC Support
Date de publication: 2023-05-05

Will these hold tight with 110 psi water pressure with copper clamp on?

Posée par: cloe
Yes, our SharkBite fittings are rated to 200°F and 200 psi.
Répondue par: RWC Support
Date de publication: 2023-05-04

Will these hold tight even with 110 psi water pressure?

Posée par: cloe
Pipe will hold, but fittings and clamps aren't rated that high.
Répondue par: SnowyMT
Date de publication: 2023-05-06

Is this the outside demension

Posée par: Howard
Hello, The dimensions in the description are nominal pipe sizes. This fitting is suitable for connecting 3/4" nominal size (7/8" O.D.) PEX or PE-RT tubing to 1/2" nominal size (5/8" O.D.) PEX or PE-RT tubing. If you have additional questions please don't hesitate to reach out to our technical support department at 877-700-4242. Best Regards,
Répondue par: RWC Support
Date de publication: 2023-05-06
  • y_2024, m_7, d_17, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_fr_CA, sid_1001013226, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 50ms
  • QUESTIONS, PRODUCT