Magasinez les aubaines du Vendredi fou que vous ne voudrez pas manquer!  Magasiner les articles de l’événement

SharkBite SharkBite Robinet à bille coulissant, 1"

Modèle nº 24737LF|Nº UGS 1001615629

Choisissez vos options

Aperçu

Modèle # 24737LF Internet # 1001615629

Le robinet à bille coulissant de SharkBite permet de couper 2 po de tuyauterie rigide en cuivre ou en PVC-C sur une canalisation existante pour ensuite reconnecter la tuyauterie à laide de loutil de désaccouplement en glissant le raccord sur lautre extrémité du tuyau. Technologie à insertion novatrice pour une installation rapide et facile. Excellent outil à avoir sous la main en cas de gel ou de réparations urgentes. Solution idéale pour les espaces restreints. Linstallation rapide et facile permet de réduire les risques derreurs

  1. Compatible avec les tuyaux en cuivre, PVC-C, PEX, PE-RT et PEHD
  1. Installation sans outils, soudage, brides de serrage, raccords-union, ni colle
  1. La bride de démontage permet de détacher le raccord du tuyau en cas derreur (vendue séparément)

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1.839
Hauteur de l’emballage (en pouces)
1.84
Largeur assemblée (en pouces)
1.4
Largeur de l’emballage (en pouces)
1.84
Poids assemblé (en livres)
1.4
Poids de l’emballage (en livres)
1.4
Profondeur assemblé (en pouces)
8.189
Profondeur de l’emballage (en pouces)
8.19

Détails

Entretien des installations
Matériau
Laiton
Nombre d'articles dans l'emballage
1
Pays d'origine
AU-Australia
Taille
1
Utilisation
Alimentation d'eau

Garanties et certifications

RWC-Warranty- FR
SharkBite Robinet à bille coulissant, 1"SharkBite SharkBite  Robinet à bille coulissant, 1"Le robinet à bille coulissant de SharkBite permet de couper 2 po de tuyauterie rigide en cuivre ou en PVC-C sur une canalisation existante pour ensuite reconnecter la tuyauterie à laide de loutil de désaccouplement en glissant le raccord sur lautre extrémité du tuyau. Technologie à insertion novatrice pour une installation rapide et facile. Excellent outil à avoir sous la main en cas de gel ou de réparations urgentes. Solution idéale pour les espaces restreints. Linstallation rapide et facile permet de réduire les risques derreurs
SharkBite
1001615629
CAD66.732022-11-28
Home Depot Canada
SharkBite Robinet à bille coulissant, 1" est évalué 4.4 de 5 de 13.
  • y_2022, m_11, d_27, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_5
  • loc_fr_CA, sid_1001615629, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 119ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Space needed on rigid line My main supply line valve was a compression type. It was corroded and leaking. So I decided to replace it. After the city supply valve was turned off, I cut out the old valve. All in all it's worked perfectly. However, here's what I'd like to communicate... The instructions say that it's supposed to cover a gap of up to 2in... Well, I cut the 2in section and it wasn't big enough for me to slip it on. So, long story short, I ended up cutting a total of 6&5/8ths out of the original pipe and using 3&7/8ths with a sharkbite coupling and the slip ball valve... That being said, maybe I could have just cut out 2&3/4ths inches. I haven't had full pressure for years because I was so nervous to mess with it.
Date de publication: 2021-03-29
Rated 5 de 5 de par Easy to install and no leaks Used this to replace an old leaky shutoff. It was very easy to install but just be aware that it requires a 2" gap (no more) which can be difficult to achieve exactly if replacing an old valve like I was (could not get the old valve out without leaving a bigger than 2" gap). I had to use an additional short length of PEX and a Sharkbite coupler to get the gap down to 2" (YMMV). I like that it is a ball valve and so does not restrict the water flow like the globe-type valve I replaced.
Date de publication: 2022-04-21
Rated 2 de 5 de par Slip valve is not looking enough Had to replace and old gate valve that would not shut off. In the past I have used a shark bite ball valve and slip fitting. Saw this and was excited as it would reduce the number of connections needed. Ended up still needing another connection because every old valve was a half inch longer then this allowed. Would be a great product and get 5 starts if the slip end were longer.
Date de publication: 2020-11-22
Rated 1 de 5 de par Stopped working Less than a year and the valve no longer works. We have freezing temperatures and I cannot turn off my water. Moving to Off position, water is still running.
Date de publication: 2021-01-31
Rated 5 de 5 de par Quick installation I cut off an inch to much of copper pipe and this was the perfect fix.
Date de publication: 2018-08-22
  • y_2022, m_11, d_27, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_5
  • loc_fr_CA, sid_1001615629, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 51ms
  • REVIEWS, PRODUCT

I recently installed a 3/4" Sharkbite ball valve in-line on my water supply to the sprinklers on the lawn side of the old/failing existing gate valve located in the basement. There was less pressure after install...has anyone had this issue?

Posée par: beerman611
Hi There, Thanks for the inquiry. All SharkBite ball valves are full-bore without restriction, so it would be unusual that you would encounter less pressure from the valve compared to your old gate valve. Was there any other component installed in the system recently? Thanks.
Répondue par: SharkBite Support
Date de publication: 2020-09-16
  • y_2022, m_11, d_27, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_1001615629, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT