Veuillez attendre de recevoir un courriel indiquant que votre commande est prête à être ramassée avant de vous rendre au magasin.  En savoir plus

SharkBite Shrkbte Pf Dscnnct Clip 3/4 In

Modèle nº 421332|Nº UGS 1001144824

Aperçu

Modèle # 421332 Internet # 1001144824

Shrkbte Pf Dscnnct Clip 3/4 In

  1. Disconnect clips allow for quick un-install if mistake is made
  1. Available in 1/2 In., 3/4 In., and 1 In.
  1. Easy removal tool
  1. Reusable
  1. Design certified and agency listed

Spécifications

Dimensions

Hauteur assemblé
0.204
Hauteur de l’emballage (en pouces)
0.204
Largeur assemblée
0.204
Largeur de l’emballage (en pouces)
0.204
Poids assemblé
0.247
Poids de l’emballage (en livres)
0.247
Profondeur assemblé
0.204
Profondeur de l’emballage (en pouces)
0.204

Détails

Entretien des installations
Oui

Garanties et certifications

Pour de plus amples informations, veuillez contacter notre service à la clientèle au 1-800-628-0525
Shrkbte Pf Dscnnct Clip 3/4 InSharkBite Shrkbte Pf Dscnnct Clip 3/4 InShrkbte Pf Dscnnct Clip 3/4 In
SharkBite
1001144824
CAD3.55
Home Depot Canada
Shrkbte Pf Dscnnct Clip 3/4 In est évalué 1.7 de 5 de 7.
  • y_2021, m_1, d_16, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_fr_CA, sid_1001144824, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 90ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Complete fail I’ve used these and also the special plier tool. Neither of them is very effective. Best option is to use appropriately-sized crescent wrench. Just fit the wrench to the pipe or tubing, then slide against the sharkbite fitting, and pull it off. Works best for me.
Date de publication: 2020-03-08
Rated 2 de 5 de par Quick installation, impossible to remove I thought this was the most wonderful product until it was time to remove the SharkBite fitting. "Easy" disconnect couldn't be further from the truth. I've been wrestling with this for the last hour and it hasn't budged. I am following the instructions as well so this has nothing to do with operator error.
Date de publication: 2018-12-02
Rated 1 de 5 de par Waste of Time and Money I was almost sold on Sharkbite, until I was forced to "undo" a fitting, using the disconnect clips. The in store demonstration of the removal process was nothing like my personal experience. In real life, I found myself in a cold and muddy 26" crawl space cutting the fitting off, like I've done, for the last two decades, except at four times the cost.
Date de publication: 2016-11-26
Rated 1 de 5 de par Disconnect tool This tool is as close to worthless as you can get. A waste of time and money. Ended up cutting out four fittings to fix a defective one.
Date de publication: 2016-10-23
Rated 5 de 5 de par Great little tool This tool is a must have when installing any Sharkbite connections. I just installed two 3/4" connections. The first one went on just great, very quickly. With the second one, the connection went in halfway and stopped. I went down to my local hardware store and picked up this tool and very quickly removed the second connector and found a little bump on the underside of the pipe that prevented complete installation. I removed the bump and successfully reinstalled the connection all the way on. Without this little tool I would have been stuck with a failed installation.
Date de publication: 2016-10-14
Rated 1 de 5 de par disconnect clip I have had no success with the disconnect tool. The white tubing does not come out. Your video makes it look easy but not so. I buy additional joints to take care of leaks, but that is more $$.
Date de publication: 2016-07-01
Rated 1 de 5 de par Absolutely worthless I was told to buy the disconnect clip because it will be the best $2 you will ever spend. The Sharkbite fitting I installed did not seat the full 3/4 of an inch and when I tried to remove it with the disconnect clip, nothing moved. After pulling the clip towards the fitting with my right hand and pulling on the copper pipe with my left hand for at least 10 minutes, I decided it was better to make a second cut on the copper pipe below the Sharkbit fitting versus inadvertently bending the copper. I ended up making another trip to HD, buying a second fitting and a longer hose. I have taken the fitting with copper in it to my workbench and still cannot disconnect the copper with the clip. My experience with Sharkbite is buy double.
Date de publication: 2016-05-22
  • y_2021, m_1, d_16, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_fr_CA, sid_1001144824, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 23ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;