Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Aperçu

Modèle # U370LFCA Internet # 1000792340

Les raccords-poussoirs SharkBite<sup>®</sup> sont le moyen le plus rapide et le plus facile de joindre toute combinaison de tuyaux en cuivre, CPVC ou PEX. Chaque raccord accroît la facilité d'utilisation tout en réduisant le temps et l'effort nécessaire pour raccord

  1. Raccord-poussoir instantané de grande facilité d'emploi.
  1. Raccords certifiés jusqu'à 1379 kPa (200 PSI) et 93°C (200° F)
  1. Adaptés aux tuyaux en cuivre et aux tuyaux CTS en CPVC et en PEX, dans toute combinaison.
  1. Avec gaine de tubulure intégrale pour les installations en PEX.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
3.84
Hauteur de l’emballage (en pouces)
0.53
Largeur assemblée (en pouces)
0.75
Largeur de l’emballage (en pouces)
1.77
Poids assemblé (en livres)
0.37
Poids de l’emballage (en livres)
0.36
Profondeur assemblé (en pouces)
0.75
Profondeur de l’emballage (en pouces)
2.76

Détails

Certifié
Entretien des installations
Non
Matériau
Laiton
Nombre d'articles dans l'emballage
1
Pays d'origine
US-United States
Raccord
Raccord-poussoir
Taille
3/4
Taille du raccord
3/4 po.
Type de raccord
Raccord en T
Utilisation
Eau potable

Garanties et certifications

1-888-820-0147
Té 3/4 po x 3/4 po x 3/4 poSharkBite Té  3/4 po x 3/4 po x 3/4 poLes raccords-poussoirs SharkBite<sup>®</sup> sont le moyen le plus rapide et le plus facile de joindre toute combinaison de tuyaux en cuivre, CPVC ou PEX. Chaque raccord accroît la facilité d'utilisation tout en réduisant le temps et l'effort nécessaire pour raccord
SharkBite
1000792340
Té 3/4 po x 3/4 po x 3/4 po est évalué 4.8 de 5 de 227.
  • y_2022, m_10, d_2, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_62, tr_165
  • loc_fr_CA, sid_1000792340, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 61ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Great for temporary connections... ...and apparently for permanent ones too. I understand that the UPC now allows these fittings to be used inside walls in permanent installations. I am using a pair of these tees to make a temporary connection from my old copper water system to my new PEX system. When I am finished cutting out the old copper, I will relocate my water heater and run new lines to my PEX manifold and from the city's main supply line, and connect those with permanent barbed fittings and crimp rings. But in the meanwhile, these do a great job. They went in VERY quickly and there has been no sign of any leakage.
Date de publication: 2013-11-17
Rated 5 de 5 de par great product I was doing a plumbing project , installing a new UV light and a house water filter housing and saw the benefits of using Sharkbite products.With all Sharkbite products the pipe inside will spin and I will be able to swivel my UV canister away from the wall and remove it if would need replacement .After installing everything I didn't have enough teflon tape on the threads causing a leak and had to remove the UV unit and yes it did swivel away from its hold down brackets so I could reseal the threads .
Date de publication: 2016-01-24
Rated 5 de 5 de par Easy connection These push-fit fittings are great and easy to use. They will speed up installation. I used it to connect my existing CPVC with the new PEX tubing and it was a very simple installation. They are a little more costly but are worth the money.
Date de publication: 2012-09-11
Rated 5 de 5 de par This product was super easy to use. It's also very easy to disconnect and reconnect if need be. I... This product was super easy to use. It's also very easy to disconnect and reconnect if need be. I highly recommend this for pipe replacement or new additions.
Date de publication: 2018-04-25
Rated 5 de 5 de par Excellent product. No retainer ring to forget that other similar fittings require and simple to install.
Date de publication: 2014-10-07
Rated 5 de 5 de par Expensive but ease of install is worth it Very easy to install. Wish more stores carried lead free in the store.
Date de publication: 2012-07-10
Rated 5 de 5 de par Great product! Saves the day alot !!! We are on a older property and we use these quite frequentl... Great product! Saves the day alot !!! We are on a older property and we use these quite frequently.... It is awesome and does not fail us.
Date de publication: 2020-02-04
Rated 5 de 5 de par Sharkbites are great for tying into existing work or running new work, without any soldering... i... Sharkbites are great for tying into existing work or running new work, without any soldering... if the space you are working in is tight, and neither side of the pipe will move much (for copper), be sure to get the "slip-tee" version, which will allow you to slide the sharkbite down further on the pipe and slide it back to make a solid connection.... great innovation and makes a 20 minute solder job into existing work (after draining the lines) take about 5 mins.
Date de publication: 2018-08-14
  • y_2022, m_10, d_2, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_62, tr_165
  • loc_fr_CA, sid_1000792340, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

I was going to the Sharkbite 3/4, 3/4, 3/4 Tee to add an additional water line for a sink. I noticed a direction arrow

Pointing in from the single 3/4 side. I want the water to flow out of the single side to my sink. Will that work
Posée par: JT
There is no directional arrow on the Tee, that is a shark emblem that we incorporate so we no it is our product. You can install the tee however you need for your installation. If you have further questions, please contact Customer Service M-F, 8am-5pm at (877) 700-4242.
Répondue par: RWC Support
Date de publication: 2020-10-11

Will this work with PVC? the incoming water line to my house is 3/4&quot; schedule 40 PVC. i am loo...

Will this work with PVC? the incoming water line to my house is 3/4&quot; schedule 40 PVC. i am looking to 'T' off of that and run PEX in opposite directions. just not sure if i can go PVC into the bottom of this T, and then PEX either direction.
Posée par: matt
No, that tee is just for PEX, copper or CPVC. The tee you need is a transition tee from schedule 40 PVC to PEX, copper or CPVC. This tee is a special order item on HomeDepot.com. The special order sku # is 1001501319. Your other option would be to install a 3/4&quot; PVC transition coupling first, then a small piece of PEX pipe, then the 3/4&quot; tee you originally inquired about. Both of those fittings are sold in the store without having to special order anything. If you have any further questions, please contact our Customer Service, M-F, 8am-5pm at (877) 700-4242.
Répondue par: SharkBiteProductExpert
Date de publication: 2019-07-27

i have 2 existing water lines cold &amp; hot. &nbsp;i would like to cut into them use the sharkbite tee to add cold &amp; hot into a utility tun. &nbsp;can i use this sharkbite tee for that?

Posée par: Ajax
SharkBite products as designed for PEX, copper, CPVC and PERT tubing to be used with potable water only, with a maximum temp. of 200 F and maximum pressure rating of 200 psi.
Répondue par: The Home Depot Canada
Date de publication: 2021-02-26

Can I use this fitting to run a PEX line from a Polybutylene (PB) line?

Can I use this fitting to run a PEX line from a Polybutylene (PB) line?
Posée par: ConnectorProblems
Hello, SharkBite part # U370LFA is not suitable for use with polybutylene tubing. If you have additional questions please don't hesitate to reach out to our technical support department at 877-700-4242. Best Regards,
Répondue par: RWC Support
Date de publication: 2021-07-26

Are these Push-to-Connect UPC approved for use in Connecticut?

Posée par: Patrick
Hi, The SharkBite 3/4 in. Push-to-Connect Brass Tee Fitting has been tested and approved to the standards in the link below. If you have any more questions you can call tech support at 877-700-4242. (https://amer.sharkbite.com/us/en/brass-push-to-connect/fittings/tees/brass-push-tee) (Kind regards,)
Répondue par: RWC Support
Date de publication: 2022-04-18

How much do you have to cut the pipe you will be servicing for this to fit properly and how far does the pipe slip into the tee?

Posée par: umchong2
As per Sharkbite, the pipe insertion amount for 1/2 fittings is 15/16&quot; or almost one inch. You'd have to cut accordingly to make this fit. They have another Tee fitting with a 'slip' end which would make the installation much easier.&nbsp;
Répondue par: jackie2701
Date de publication: 2017-11-06
  • y_2022, m_10, d_2, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_fr_CA, sid_1000792340, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 91ms
  • QUESTIONS, PRODUCT