Achetez en ligne et ramassez en magasin ou dans le stationnement  En savoir plus

Simpson Strong-Tie Étrier À Solive Double - 2 x 6 (ZMAX)

Modèle nº LUS26-2Z|Nº UGS 1000151887

Aperçu

Modèle # LUS26-2Z Internet # 1000151887

Pour l'assemblage entre une solive double 2x6 ou 2x10 et un linteau. Son motif de clouage à double cisaillement breveté permet d'obtenir une plus grande solidité avec moins de clous.

  1. Le clouage de biais des solives est plus facile dans les espaces restreints.
  1. On l'installe avec des clous ordinaires (pas nécessaire d'acheter des clous à solive plus courts).
  1. La galvanisation ZMAXMC offre une meilleure résistance à la corrosion lors d'applications extérieures et avec le bois traité.
  1. Installer au moyen de 10 clous ordinaires galvanisés à chaud 16d ou vis Strong-DriveMD SD #10 x 2-1/2".

Spécifications

Dimensions

Hauteur assemblé (en pouces)
2
Hauteur de l’emballage (en pouces)
4.986
Largeur assemblée (en pouces)
5.125
Largeur de l’emballage (en pouces)
5.346
Poids assemblé (en livres)
0.39
Poids de l’emballage (en livres)
0.39
Profondeur assemblé (en pouces)
4.875
Profondeur de l’emballage (en pouces)
2.204

Détails

Ajustement
Non
Famille de couleurs
Argent
Longueur (en pouces)
4.98
Matériau
Acier
Pays d'origine
US-United States
Taille
2x6
Type de bride de suspension
Montage de face
Utilisation
Bois

Garanties et certifications

Telephoner au 1-800-999-5099 pour les informations sur la garantie
Étrier À Solive Double - 2 x 6 (ZMAX)Simpson Strong-Tie Étrier À Solive Double -  2 x 6 (ZMAX)Pour l'assemblage entre une solive double 2x6 ou 2x10 et un linteau. Son motif de clouage à double cisaillement breveté permet d'obtenir une plus grande solidité avec moins de clous.
Simpson Strong-Tie
1000151887
Étrier À Solive Double - 2 x 6 (ZMAX) est évalué 4.7 de 5 de 34.
  • y_2022, m_8, d_9, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_6, tr_28
  • loc_fr_CA, sid_1000151887, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 83ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Reasonably priced and fairly foolproof, I use these often in sistering up floor joists to address... Reasonably priced and fairly foolproof, I use these often in sistering up floor joists to address springy or compromised floors in older construction. Just be careful to purchase the right ones for your needs, these are for nominal lumber, ie each joist is 1.5" wide.
Date de publication: 2020-02-01
Rated 4 de 5 de par doesn't hold a 4x4 Doesn't fit a 4x4 because it's not supposed to, it holds a double 2x4 which is 3 inches by 3.5 inches while a 4x4 is 3.5 by 3.5.
Date de publication: 2014-08-13
Rated 5 de 5 de par The negative reviews are because folks don't know what they're buying. The title is a bit mislead... The negative reviews are because folks don't know what they're buying. The title is a bit misleading. This is a face mount joist hanger for (2) 2"x6" boards. standard lumber. So, imagine a laminated beam comprised of 2 2"x6"x10' boards. That is what this is made for, and it does it well.
Date de publication: 2016-11-02
Rated 5 de 5 de par Yep. They work great of floor joists. I had to add a few extra supports to jack off of to repl... Yep. They work great of floor joists. I had to add a few extra supports to jack off of to replace my sill plates. Everything held together great.
Date de publication: 2018-05-22
Rated 5 de 5 de par Multi-use Excellent for a fender eliminator/license plate mount/blinker mount on a street bike! May require some minor trimming and drilling, but will save you a boat load of dough!
Date de publication: 2010-07-27
Rated 5 de 5 de par Worked great for my deck repair to fix joists. Was... Worked great for my deck repair to fix joists. Was able to bend to work in flat areas. Would definitely recommend and use this product again
Date de publication: 2020-06-17
Rated 5 de 5 de par I like the Simpson products and these hangers are no... I like the Simpson products and these hangers are no exception. These fit perfectly with a double 2x6 beam.
Date de publication: 2019-07-08
Rated 5 de 5 de par Joist hangers Makes hanging joists very easy, especially with the nail to hold in place while screwing.
Date de publication: 2020-08-06
  • y_2022, m_8, d_9, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_6, tr_28
  • loc_fr_CA, sid_1000151887, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Will this hanger work for hanging 1-new 2x8 (1-1/2" thickness) and 1-rough cut 2x8 (1-3/4" thickness) sistered together? If not, is there a product that would work for this application? Thank you.

Posée par: Greg
The two that are standard 1.5" thickness are pretty tight, but I believe you could get the rough cut in there. You would have to do a little reshaping it as I dont think there is any other bracket that will work. I would imagine you will have to hammer each one individually to make it fit. Hope this helps.
Répondue par: JosephD
Date de publication: 2022-02-04

will this hanger take a double with 1/2 plywood in the middle 3 1/2 total

Posée par: chuck
No, it will not. Sized to take approx 3" stock.
Répondue par: NVContractor
Date de publication: 2021-11-23

Could this be used to attach a 4x6 beam to a tree for a swing set?

Posée par: Playground
Thank you for your interest, but I’m sorry to say we do not have any connectors intended for swing applications. Our products have not been evaluated with regards to the forces that a swing may put on them. Thank you!
Répondue par: Simpson Strong-Tie
Date de publication: 2020-07-27

can this be attached to concrete with tapcons?

Posée par: Chris
No, it is not recommended to be attached to concrete with tapcons.
Répondue par: Communityanswer
Date de publication: 2019-08-29

what size joist is Simpson Strong Tie Model LUS28-2Z for?

The description does not say
Posée par: Montana
It is for two 2x8s side-by-side.
Répondue par: littlemike
Date de publication: 2019-08-29

how long should the 4 screws be that pass through the (2) 2x6s and into the 2x header?

how long should the 4 screws be that pass through the (2) 2x6s and into the 2x header?
Posée par: lunchbox
The LUS26-2Z requires 0.162 x 3 1/2" nails (not screws) in all holes (including the double shear joist locations). Thank you!
Répondue par: Simpson Strong-Tie
Date de publication: 2022-01-18

how long of a screw should be used in the 4 holes that go through the (2) 2x6 joists and into the...

how long of a screw should be used in the 4 holes that go through the (2) 2x6 joists and into the 2x header?
Posée par: lunchbox
The LUS26-2Z requires 0.162 x 3 1/2" nails (not screws) in all holes (including the double shear joist locations). Thank you!
Répondue par: Simpson Strong-Tie
Date de publication: 2019-04-10

Do they make a heavy duty one of these?

Do they make a heavy duty one of these?
Posée par: Greg
The HUS28-2 is 14 gauge. It is not offered in Z-MAX, but can be ordered with the HDG finish which provides the same level of corrosion protection. Please see the load tables in our catalog/on our website for allowable loads and to verify if adequate for your demand load. Thank you!
Répondue par: Simpson Strong-Tie
Date de publication: 2018-11-21
  • y_2022, m_8, d_8, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_fr_CA, sid_1000151887, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 71ms
  • QUESTIONS, PRODUCT