L’événement On se met à l’oeuvre est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # RTC2Z Internet # 1000804583

Faire, des projets solides de bonne mine qui va durer avec le CCF rigide Cravate . Cette série recueille les deux éléments en bois à un poteau vertical formant un angle de 90 degrés. Ces connecteurs sont idéales pour la construction de tables de travail et de stockage des étagères.

  1. Connecteurs Tie ™ angle rigides assurent une liaison forte de 90 degrés entre les deux 2x2s et un poste de 2x2, formant un angle
  1. Pas de coupes en biais ou fixation angle qui peut fendre le bois
  1. Plus fort que les autres méthodes de construction de coin
  1. Poster Taille: 2x
  1. Solive Taille: 2x
  1. Installer avec des vis SD8x1.25 Strong-Drive <sup>®</sup>

Spécifications

Dimensions

Hauteur assemblé (en pouces)
5.5
Hauteur de l’emballage (en pouces)
4.12
Largeur assemblée (en pouces)
5.5
Largeur de l’emballage (en pouces)
5.59
Poids assemblé (en livres)
0.56
Poids de l’emballage (en livres)
0.56
Profondeur assemblé (en pouces)
4.13
Profondeur de l’emballage (en pouces)
5.59

Détails

Ajustement
Non
Pays d'origine
US-United States
Type
Vilebrequin d'angles
Type d'équerre
En angle
Type de produit
Vilebrequin d'angles
Type de quincaillerie
Construction
Type de sangle
Attache

Garanties et certifications

Visitez notre site Web à strongtie.com et entrez en garantie dans le cadre de la recherche d'informations détaillées sur la garantie
RTC2Z ZMAX Galvanisé calibre 18 2x connecteur Cravate rigideSimpson Strong-Tie RTC2Z ZMAX  Galvanisé calibre 18 2x connecteur Cravate rigideFaire, des projets solides de bonne mine qui va durer avec le CCF rigide Cravate . Cette série recueille les deux éléments en bois à un poteau vertical formant un angle de 90 degrés. Ces connecteurs sont idéales pour la construction de tables de travail et de stockage des étagères.
Simpson Strong-Tie
1000804583
CAD10.212024-05-22
Home Depot Canada
RTC2Z ZMAX Galvanisé calibre 18 2x connecteur Cravate rigide est évalué 4.8 de 5 de 166.
  • y_2024, m_5, d_21, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_26, tr_140
  • loc_fr_CA, sid_1000804583, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 96ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Good brackets Nice brackets, though expensive. You can buy them in workbench kit of 8 with screws included, and that is what I recommend over buying them singly. It is cheaper that way. I used mine to build an aquarium stand (see picture). These are galvanized, so if you paint them you can't use most spray paint without a special primer. I used acrylic latex paint, which is supposed to work with galvinized metal. It took about 3-4 coats.
Date de publication: 2015-07-27
Rated 5 de 5 de par quick and easy project I have always made my own platform bed frames out of 2x4's because I like to store big plastic totes under the bed. The last one was quite an involved structure that took me forever and I wanted to make something quick and easy this time. Cue these brackets. I had the donor project disassembled, the pieces re-cut and put back together as a queen size bed frame with an OSB platform in less than 3 hours using nothing but my impact driver and cordless circular saw right there in the bedroom. It was square with very little effort and it is rock solid with a minimal amount of wood. I also am in love with the Simpson wafer head screws. I thought they might be a gimmick, but they really do make installation a breeze compared to my old standby of drywall screws. The time saved and frayed nerves that they prevented made up for the increased cost. No one will ever guess what brutally practical hardware lurks underneath the bed skirt.
Date de publication: 2015-10-28
Rated 5 de 5 de par Nice clean look I needed shelving in my garage and this is strong and also looks clean. We used 36 and it looks great!
Date de publication: 2014-12-09
Rated 5 de 5 de par work bench! Piece mealed this bench together from the plans i downloaded on simpsons website. My home depot didnt have the kit in stock. About 140 bucks in materials. Very sturdy!
Date de publication: 2019-01-20
Rated 5 de 5 de par These corners are great for building heavy duty tables. Makes construction very clean and easy. U... These corners are great for building heavy duty tables. Makes construction very clean and easy. Ultra strong! I've a set that is probably 10 years old that's been on the garage work bench and they look as good today as the new set i just bought. You cannot build a rickety table if you use these. They are absolutely the best way to create a HEAVY DUTY work bench or shelf.
Date de publication: 2018-02-13
Rated 4 de 5 de par Great Product! should be offered in stores! Only issue I... Great Product! should be offered in stores! Only issue I found while using this product is squaring my angles up perfectly. It's hard due to the fact that the angle is not one piece leaving room for play on either end.
Date de publication: 2017-11-14
Rated 5 de 5 de par Provides rigid and true framework. Brackets provide a very rigid frame and all angles were very close to 90 degrees. Racking and twist once all screws were installed was almost non-existent.
Date de publication: 2021-06-06
Rated 5 de 5 de par Needed to make a shelf to store my kids outdoor toys. Worked out awesome for my storage project. ... Needed to make a shelf to store my kids outdoor toys. Worked out awesome for my storage project. Very strong and sturdy product.
Date de publication: 2019-08-27
  • y_2024, m_5, d_21, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_26, tr_140
  • loc_fr_CA, sid_1000804583, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT

Could these be used to make raised garden beds?

Could these be used to make raised garden beds?
Posée par: KRArkansas
Yes. If you are looking for the rugged look of braces. These are used for deck support and such so structure is not an issue. These come in multiple variations of 2x4s and 4x4s. As for a garden bed, if you want the look these connectors provide they are a great choice.
Répondue par: MaximumEffort
Date de publication: 2023-05-05

Can you use it flipped over, with the extending piece facing up?

Can you use it flipped over, with the extending piece facing up?
Posée par: HomeBeast
Yes, it can be used upside down. The attached picture shows the top of my work bench and if you wanted to have pieces at the bottom of the legs that can be done.
Répondue par: JJKC
Date de publication: 2023-05-06

Could you use this to connect two 2x6 beams at a corner, resting on top of a 4x4 post?

Could you use this to connect two 2x6 beams at a corner, resting on top of a 4x4 post?
Posée par: Craig
For a 4x4 post you will want to use Model # RTC42 which will support a 2x6 beam, or any 2 by for that matter. Model # RTC2Z only support 2x4 posts
Répondue par: Jeff
Date de publication: 2023-05-05

Will these work in a 2x2 setup? George

Will these work in a 2x2 setup? George
Posée par: Shelver
I don't think so, they are specifically designed for 2x4s. There are several different connectors for 2x2...see the catalog via the link below. Not sure which ones home depot carries. http://embed.widencdn.net/pdf/plus/ssttoolbox/xd2mseqyql/C-C-2017-p355.pdf
Répondue par: kerriman
Date de publication: 2023-05-05

Can you use any wood screws or do you need specific ones

Posée par: Stalker
Hi, Thank you for your question, The vendor have confirmed that RTC2Z connector requires specific screws - not any generic screws. You can use one of the following 2 options: SD8x1.25 (#8x1 &frac14;&rdquo; wafer head screw) SD9112 (#9x1 &frac12;&rdquo; hex head connector screw)
Répondue par: The Homedepot Canada
Date de publication: 2024-04-12

Is this item true size 2 x 2 or 2X3 ? as the lumber is 1.5 inch but commonly called 2 by ...

Posée par: Wally
The slot is 1.5&rdquo; to work with any of the 2x material. (2x2, 2x4, 2x6 etc)
Répondue par: Shaun
Date de publication: 2022-06-16

Do you have connector for 4x4 lumber

Posée par: Hotrod
The RTC2Z shown here connects 2x joists to a 2x4 post. We also offer the RTC42 which connects 2x joists to a 4x4 post and the RTC44 which connects 4x joists to 4x4 posts. Thank you!
Répondue par: Simpson Strong-Tie
Date de publication: 2023-05-03

Can you use these as corner braces for a ground level deck? Knocking the point into the ground?

Can you use these as corner braces for a ground level deck? Knocking the point into the ground?
Posée par: kelli
It would be up to the Designer/Engineer of Record to specify the appropriate connector based on framing layout, demand loads, local building codes, etc., but I can tell you we can only support the installation of our products as designed/tested. In the case of the RTC2Z that would attached to a wood post and carrying the two size members. Also, other than the E-Z Spike, we do not recommend any of our connector products for below grade applications. Thank you!
Répondue par: Simpson Strong-Tie
Date de publication: 2023-05-07
  • y_2024, m_5, d_21, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_fr_CA, sid_1000804583, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 79ms
  • QUESTIONS, PRODUCT