Magasinez les aubaines du Vendredi fou que vous ne voudrez pas manquer!  Magasiner les articles de l’événement

STANLEY Boîte à onglets de luxe avec scie de 14,5 pouces

Modèle nº 20-600D|Nº UGS 1000116597

Aperçu

Modèle # 20-600D Internet # 1000116597

Utilisez la boîte à onglets Stanley Deluxe avec scie pour réaliser des coupes d'onglets de calibre professionnel sans avoir à investir dans un outil électrique encombrant. Les fentes mesurées sur la boîte à onglets vous permettent d'effectuer des coupes à 90°, 45° et 22,5° tandis qu'un pont sur le dessus de la scie à ruban l'empêche de creuser dans la plate-forme de coupe. Fixez votre pièce à usiner en tournant et verrouillant les goupilles en forme de came dans la base en nid d'abeille.

  1. Base en nid d'abeilles et 2 goupilles en forme de cames permettent de sécuriser la pièce pour des coupes précises.
  1. Butée de scie intégrée pour éviter de couper dans la boîte à onglets
  1. La lèvre moulée sur le bord de la base permet une utilisation facile sans montage.
  1. Les fentes de rangement intégrées protègent les goupilles de came et le crayon.
  1. Construction durable
  1. 2 trous de montage dans la base
  1. Facile à utiliser

Spécifications

Dimensions

Hauteur assemblé (en pouces)
4.5
Hauteur de l’emballage (en pouces)
4.5
Largeur assemblée (en pouces)
7
Largeur de l’emballage (en pouces)
7
Poids assemblé (en livres)
2.76
Poids de l’emballage (en livres)
2.76
Profondeur assemblé (en pouces)
18.5
Profondeur de l’emballage (en pouces)
18.5

Détails

Guide de coupe au laser
Non
Longueur (en po)
14.5
Longueur de la lame (en po)
14
Nombre de pièces dans l'ensemble
2
Nombre de pièces dans lensemble
1
Pays d'origine
US-United States
Portatif ou fixe
Portatif
Sans fil/avec fil
Sans fil
Type de support à outils
Support pour scie à onglets
Utilisation
Scie à onglets

Garanties et certifications

Garantie à vie limitée
Boîte à onglets de luxe avec scie de 14,5 poucesSTANLEY Boîte à onglets de luxe avec scie de 14,5 poucesUtilisez la boîte à onglets Stanley Deluxe avec scie pour réaliser des coupes d'onglets de calibre professionnel sans avoir à investir dans un outil électrique encombrant. Les fentes mesurées sur la boîte à onglets vous permettent d'effectuer des coupes à 90°, 45° et 22,5° tandis qu'un pont sur le dessus de la scie à ruban l'empêche de creuser dans la plate-forme de coupe. Fixez votre pièce à usiner en tournant et verrouillant les goupilles en forme de came dans la base en nid d'abeille.
STANLEY
1000116597
Boîte à onglets de luxe avec scie de 14,5 pouces est évalué 3.8 de 5 de 925.
  • y_2022, m_11, d_26, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_62, tr_863
  • loc_fr_CA, sid_1000116597, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 73ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par A good miter box for the price. You get what you pay for and for the price, this miter box does an excellent job for small jobs. What makes this box superior over the Buck Brothers is the built in honey comb clamps. This feature holds the wood very well and helps in getting clean accurate cuts. I recommend that you use both clamps. Don't think you can get away with using only one and holding the other end. You have two clamps, so use them. It helps a lot. I would have given this box five stars but the saw is too short. It is 12 inches. The Buck Brothers is 14 inches. You could use the two extra inches. But the Buck Brothers does not have the built in clamps and this is why the Stanley is superior.
Date de publication: 2012-07-10
Rated 4 de 5 de par Good for basic use [This review was collected as part of a promotion.] This is a good alternative for buying a miter saw for $100+, which you don't really need unless you are doing a lot of cutting. At the price it is, the miter box and saw serves its purpose. It is a little bit of work to cut, but again it all depends on how many cuts you will do. For basic use, it allows a fairly precise cut. The saw is decent, not great, and the pegs that come with the box do their job of holding what you are cutting (they are slighty oval and allow fine tuning to hold everything firm). In short: if you need limited cutting, this is a good compromise.
Date de publication: 2007-01-23
Rated 5 de 5 de par Great for small baseboard project! I did not want to make a hasty decision on a power miter saw for a small baseboard project in the kitchen. So, I chose the Stanley Miter Box with a saw and 2 pegs for two reasons: (1) I had to learn how to cut angles, and (2) I was only going to cut about 20 ft. of baseboard for this project. I recommend others learn the basics too before jumping into "pro" projects. Glad that I did buy a wee extra bit of board so I could learn what to expect when I cut 45 degree angles for inside and outside corners. I took pictures for my own sake, but decided to share with all of you. As a 64 y.o. woman with arthritis I saw slowly, however, the end result was a smooth cut that fit well enough. I learned that even a good fit does not mean your wall is straight (caulking will resolve that small problem). LOL
Date de publication: 2015-06-17
Rated 5 de 5 de par Complete DIY novice here. I wanted to replace baseboard in our bathroom and was a bit intimidated... Complete DIY novice here. I wanted to replace baseboard in our bathroom and was a bit intimidated by the power miter saw, but also did not want to have them make the cuts at the store in case my measurements were slightly off. I bought this thinking, "for a few bucks, why not give it a try." It was awesome! Clean, perfect cuts every time. The baseboards fit like a glove. My husband even said my job was better than the original baseboard job done by the pros (I agree). Sweet little tool for high-impact jobs.
Date de publication: 2017-09-20
Rated 4 de 5 de par Good for small budgets Item works well once you know what you're doing. Good for small budgets and people who have minimal needs to cut things. It would be better with instructions on how to use the pegs to secure things in place. I messed up a few times before I figured it out. I had no wood working experience before buying this product. I needed an affordable saw for a home remodeling project. You'll need to clamp this on a table in order to use this effectively, otherwise it's hard to hold the saw in place while you cut. If you don't have clamps, you can have someone hold the box still while you cut but that's still pretty challenging. Overall, I recommend it. It's light weight, affordable, and cuts accurately enough.
Date de publication: 2015-11-10
Rated 5 de 5 de par First Timer This miter saw box did the trick! I watched a few videos before I cut. The old homeowner left quarter rounds so I was able to use mostly pine but there was one quarter round that was oak! The saw was fine, you just have to make sure you're holding it down at an angle so it doesn't cut into the plastic. The saw was a bit ragged at the end, especially when I had to cut the oak. It took more sweat. Very pleased with the results though. I probably would buy a new saw if I need it in the future. Great results for a first try!
Date de publication: 2021-03-30
Rated 5 de 5 de par Wouldn't be able to do my project without this box. I needed to cut 2 aluminum u-channels for a f... Wouldn't be able to do my project without this box. I needed to cut 2 aluminum u-channels for a frame of a new screen door at 45 angle and also shorten the aluminum frame (cut 2 side pieces at 45 angle). It was somewhat slow process because I had to use my hack saw with blade for metal which was 18 long. So the wing nuts didn't allow me to move saw back and forth much and they also constantly hit the box and caused some damage to the plastic. The pins worked very well and once tightened the piece didn't move at all even though some were up to 8' long. The cut was more or less clean but I had to file off the rough edges. In all door fits and slides perfectly, pieces cut to proper size. I also used this box to cut a piece of 2x4 with the saw provided, which was a much faster experience.
Date de publication: 2017-09-05
Rated 2 de 5 de par Saw is 12''. That's too short for the 45. I just installed a laminate floor and used this for the new trim. Bads: The saw is 12 inches and kept slipping out of the guide on the far end - not enough length to stay in the slot. Not insurmountable but it made it harder to work with than it should have been. Saw blade could be a little more aggressive. Took me way too many strokes to get through both trim and qtr round. Goods: The pegs do have a lot of versatility and they held the wood securely. I really like the idea of the saw connecting to the box when not in use and that is actually why I bought it. So-So: There probably isn't much in this price range that is better.
Date de publication: 2013-06-03
  • y_2022, m_11, d_26, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_62, tr_863
  • loc_fr_CA, sid_1000116597, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

can it cut a 2x4?

Posée par: Willy08
Yes, it can cut a 2x4. I found it can comfortably seat a board up to 3.5 inches wide and up to 3 inches thick. The bigger the board, the more elbow grease you will need for the cut. If you need to cut a lot of 2x4s, get a powered saw!
Répondue par: WoodyWorker
Date de publication: 2021-06-26

Hello, How fine is the blade of the saw? Does the saw cut smooth and precise, without eating the ...

Hello, How fine is the blade of the saw? Does the saw cut smooth and precise, without eating the wood, which results in uneven line, wrong measurements and a lot of sanding afterward? In case I decide to use a hacksaw, which is the blade of my choice for precise and smooth cuts, do I need to search 14in one, so far the longest one I found personally is 12in, is it going to work?
Posée par: Jim
It is pretty smooth and precise. I use this box sometimes over my compound miter because the box gives better cuts
Répondue par: SteveVA
Date de publication: 2021-01-28

Will this cut 45 degree bevels, like where baseboards meet at a corner?

Posée par: GeeDubya
Would not recommend. It will only work if you have really narrow baseboards. This is for cutting wood laying on the flat and the cut angle in the plane of the wide side not for standing on edge and is more of a general use than cabinetry fineness. There is a 45 degree slot for cutting width, but I would not trust that to be particularly accurate. What you need is a compound miter saw. Rent if you do not have one.
Répondue par: RaymondC
Date de publication: 2021-04-06

Can it fit a 9" deep piece of wood?

What are the dimensions inside the miter box?
Posée par: JM
No
Répondue par: SteveVA
Date de publication: 2019-11-12

can i miter cut 5"crown molding

can i miter cut 5"crown molding
Posée par: habiba
No, this box is 4 1/2 inches wide and 3 inches deep.
Répondue par: RaymondC
Date de publication: 2020-12-24

Can I cut bigger PVC pipe with this? Thanks

Posée par: Ren
Howdy Ren, Yes larger PVC pipe can easily be cut with a miter saw. The only foreseeable problem could be the miter function would not work if the saw cannot use the miter box guide slots. happy cutting, Coach Dave
Répondue par: CoachDave
Date de publication: 2017-04-03

can I use this to cut 5 1/2 in baseboards?

can I use this to cut 5 1/2 in baseboards?
Posée par: andy
No, the capacity of the 20-600D is 4 5/8."
Répondue par: SBD_Product Expert
Date de publication: 2018-03-11

I just want to make straight precise cuts in 2x4’s will this Miter box work?

Posée par: Chuck
It’ll work, but you’re better off investing in a miter saw. With this tool, you’ll be cutting forever.
Répondue par: TheDapperDad
Date de publication: 2021-12-28
  • y_2022, m_11, d_26, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_50
  • loc_fr_CA, sid_1000116597, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 69ms
  • QUESTIONS, PRODUCT