L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.
Choisissez vos options

Aperçu

Modèle # 90000919 Internet # 1001342316

Les vis Cap-Tor xd sont spécialement conçues pour fixer les planches de terrasses en composites et en PVC. Elles sont de couleur assortie avec des produits de terrasse populaires et offrent une finition propre et professionnelle. Chaque paquet contient 100 vis et 1 embout T20

  1. Grade 305 en acier inoxydable
  1. Entonnements en étoile extra profonds pour empêcher le cam-out
  1. Têtes dégagées pour couper proprement à travers la couche externe dure du platelage
  1. Inverser les filets pour éviter la prolifération et les défauts de surface
  1. Pointes de tarière de type 17 pour une insertion plus rapide et plus facile et pour éviter les fendillements

Spécifications


Couleur possible

Cèdre


Type d'accessoires

Accessoires pour terrasse


Matériau

Métal

Dimensions

Hauteur assemblé (en pouces)
1.25
Hauteur de l’emballage (en pouces)
1.25
Largeur assemblée (en pouces)
2.75
Largeur de l’emballage (en pouces)
2.75
Poids assemblé (en livres)
1.34
Poids de l’emballage (en livres)
1.34
Profondeur assemblé (en pouces)
6.75
Profondeur de l’emballage (en pouces)
6.75

Détails

Couleur possible
Cèdre
Matériau
Métal
Pays d'origine
TW-Taiwan
Type d'accessoires
Accessoires pour terrasse

Garanties et certifications

Starborn garantit que ses attaches sont exemptes de défauts de matériaux et de fabrication. La responsabilité de Starborn est limitée au prix d'achat de ce produit
Vis pour terrasse en composite - Cap-Tor xd Headcote en acier inoxydable 305 - 10 2 1/2 po. - 100 mcx/pqt - CedarStarborn Vis pour terrasse en composite - Cap-Tor xd Headcote en acier inoxydable 305 - 10 2 1/2 po. - 100 mcx/pqt - CedarLes vis Cap-Tor xd sont spécialement conçues pour fixer les planches de terrasses en composites et en PVC. Elles sont de couleur assortie avec des produits de terrasse populaires et offrent une finition propre et professionnelle. Chaque paquet contient 100 vis et 1 embout T20
Starborn
1001342316
CAD48.142024-02-29
Home Depot Canada
Vis pour terrasse en composite - Cap-Tor xd Headcote en acier inoxydable 305 - 10 2 1/2 po. - 100 mcx/pqt - Cedar est évalué 3.9 de 5 de 33.
  • y_2024, m_2, d_28, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_21, tr_12
  • loc_fr_CA, sid_1001342316, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 74ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Strips material being drilled into. Just finishing up a deck project with composite decking using these screws where hidden fasteners can't be used. Screwing composite decking into new SPF pressure treated 2x boards using variable speed adjustable torque drill. About 20% of the screws stripped the wood when the head of the screw touched the surface of the composite board. This prevented the screw from countersinking fully into decking. Will have to see if these screws eventually work their way out of the board. As it is these screws are not flush and will be a literal pain to step on with bare feet. Also forget trying to remove any screw from composite once the decking material bonds with the screw.
Date de publication: 2021-07-08
Rated 5 de 5 de par Composite color match screws They match the decking perfectly and I did not countersink. they are tricky if you hit a screw in the framing under as they would leave an ugly hole if withdrawn. The look is perfect on fascia especially. A little hard to start in the composite but I was very happy with finished product
Date de publication: 2020-09-30
Rated 4 de 5 de par Very cool fastening system When used with the installer tool the create an very discrete fastening for TREX deck boards. Practice on a scrap to make sure the tool is adjusted well. Once installed they blend right in - you can see them if you are looking for them, otherwise they are nearly invisible. We found one or two snapped off when over tightened so don't do that. If you do not use this brand of fasteners I believe it may void your TREX warranty. It would be nice if it was a stock item at Home Depot and not a special order.
Date de publication: 2020-10-04
Rated 3 de 5 de par These look great if they are countersunk properly. But it is not easy to do. I pre drilled the boards for easier installation. Here is the issue: some screws simply did not drive properly even while following the instructions. They would just stick out and become a pain to fully countersink. Some just stripped the wood below the deck board resulting in a permanently stuck screw that is sticking out. Not sure what to do about that. Any tips? Also note that if you user an impact driver to drive the screws, it will scratch off the coloured finish inside the screw head which defeats the purpose. The top of the head still has the finish but on a darker screw, the scratched on the inside of the screw head are very visible. 3 stars because the product is good when it works, but it definitely doesn't work reliably.
Date de publication: 2023-07-20
Rated 2 de 5 de par Difficult to countersink in composite decking These screws look great when countersunk. Unfortunately, even using the available countersink bit, there can be tricky to countersink. I found that pre-drilling was helpful but it is important to continue screwing until the head is countersunk. If you stop before it is fully countersunk, it is very difficult to complete the task: the screw refuses to go in further and a broken head is the likely result—very frustrating. Very expensive as well.
Date de publication: 2021-06-20
Rated 2 de 5 de par Is it possible they strip because too sharp? These screws would commonly strip the wood out before the head had sunk fully. I didn't have this problem with the cheaper brand that is fully color coated. Then when stripped, reversing would not remove them, and I'm stuck with a head out of the composite I have to get plyers to lift while reversing. Pretty over priced.
Date de publication: 2022-08-17
Rated 5 de 5 de par The right part for the job When you spend extra money to make the job look good, don't cheap out on finishing touches. Spend the few extra dollars and have something that will last and look good for years.
Date de publication: 2023-12-21
Rated 1 de 5 de par Composite screws The screws ripped thru the composite creating a bump on top of the boards. They are super difficult to insert also.
Date de publication: 2021-06-20
  • y_2024, m_2, d_28, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_21, tr_12
  • loc_fr_CA, sid_1001342316, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 58ms
  • REVIEWS, PRODUCT

How many screws per box ? What size Torx driver ? Is a Torx bit included ?

Posée par: Paul Debbie
Hello Paul Debbie, there are 100 screws per pack, T-20 Star bit included.
Répondue par: Customer support
Date de publication: 2020-06-16
  • y_2024, m_2, d_28, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_1001342316, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 150ms
  • QUESTIONS, PRODUCT