Livraison express en 3 heures à partir de 9,97 $*  En savoir plus

Aperçu

Modèle # V075169 Internet # 1001027998

Utilisez le couvre-joint universel en polycarbonate de 8 pi Snap Cap de SUNLITE pour assembler deux panneaux multimurs. Le couvre-joint en polycarbonate transparent forme une moulure en H lors de l'installation.

  1. Fait en polycarbonate pour une meilleure solidité
  1. Utilisé pour assembler deux panneaux multimurs en polycarbonate
  1. Installation facile

Spécifications

Dimensions

Hauteur assemblé (en pouces)
96
Hauteur de l’emballage (en pouces)
0.315
Largeur assemblée (en pouces)
0.335
Largeur de l’emballage (en pouces)
2
Poids assemblé (en livres)
1.69
Poids de l’emballage (en livres)
0.69
Profondeur assemblé (en pouces)
0.314
Profondeur de l’emballage (en pouces)
96

Détails

Pays d'origine
US-United States

Garanties et certifications

Pour de plus amples informations, veuillez contacter notre service à la clientèle au 1-800-628-0525
Moul H Male/Fem 8Mm 8'Sunlite Moul H Male/Fem 8Mm 8'Utilisez le couvre-joint universel en polycarbonate de 8 pi Snap Cap de SUNLITE pour assembler deux panneaux multimurs. Le couvre-joint en polycarbonate transparent forme une moulure en H lors de l'installation.
Sunlite
1001027998
Moul H Male/Fem 8Mm 8' est évalué 4.4 de 5 de 27.
  • y_2022, m_5, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_23
  • loc_fr_CA, sid_1001027998, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 164ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Garbage These caps are beyond difficult to use. Snapping them together is impossible. Poorly designed. Will be returning to the store.
Date de publication: 2022-05-03
Rated 3 de 5 de par Expensive! The sheets are reasonable, but then they gouge you... Expensive! The sheets are reasonable, but then they gouge you on the required fastening system. You’re not supposed to drill through the sheets. You use these channels to hold down the edges. At the corners you need to cut off the flanges on one side with a band saw. They don’t offer starter channels with flanges on one side only. I made it work, but I spent way more than I originally envisioned.
Date de publication: 2022-04-05
Rated 5 de 5 de par Easy to work with and drill to mount. Great product... Easy to work with and drill to mount. Great product and would use again.
Date de publication: 2022-02-01
Rated 5 de 5 de par It works good and fast... It works good and fast
Date de publication: 2021-12-18
Rated 5 de 5 de par Used panels for my catio roof. So far they have... Used panels for my catio roof. So far they have exceeded my expectations. I’ll know more as soon as we get out heavy snows.
Date de publication: 2021-09-22
Rated 4 de 5 de par A little tricky to use and get it to snap... A little tricky to use and get it to snap together but once you get a system it works fine
Date de publication: 2021-08-28
Rated 4 de 5 de par Getting the sheet into the cap was not easy ,... Getting the sheet into the cap was not easy , liquid soap helped
Date de publication: 2021-06-10
Rated 5 de 5 de par Quick and easy to use.... Quick and easy to use.
Date de publication: 2021-06-02
  • y_2022, m_5, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_23
  • loc_fr_CA, sid_1001027998, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 26ms
  • REVIEWS, PRODUCT

Could this cap be used effectively as a hip cap?

I am trying to find a ready made cap for a hip joined roof design. So far it seems like I'm going to have to come up with something on my own.
Posée par: DIYGreenhouser
Hello - This is not a recommend use for our Sunlite product.
Répondue par: Palram Americas
Date de publication: 2022-04-28

how do I connect panels using snap caps?

i mean do I need to disconnect them than snap back together or try to insert the edge of the panels into it without disconnecting? If 1st, how do I reach to snap them back together? i use them for the deck cover?
Posée par: Alex
You have to take them apart, screw the channel to the frame, lay the panel down in the channel and use a rubber dead blow mallet to rejoin the two halves of the H-channel. And predrill over size holes to allow for expansion (1/8” per 3 1/2’)
Répondue par: JOHN
Date de publication: 2022-04-05

Does this seam make it water proof

Posée par: David
I installed mine - just attached them together prior to installing them on framing - sealed with silicone and ... so far...completely waterproof!
Répondue par: AlexK
Date de publication: 2021-09-17

When I purchased this, the two pieces were already snapped together. I got home and for the life...

When I purchased this, the two pieces were already snapped together. I got home and for the life of me I cannot figure out how to take it apart so I can use it. Can anyone offer any help?
Posée par: Carl
slide them apart
Répondue par: guy
Date de publication: 2021-07-05

How do I remove the product stickers more easily? Its taking over 30 minutes per piece with 90% A...

How do I remove the product stickers more easily? Its taking over 30 minutes per piece with 90% Alcohol and Goo Gone with a plastic scraper, and the stickers still do not remove easily. This is a serious product flaw and a huge headache.
Posée par: FrustratedUser
Try using a hair dryer or heat gun only over the sticker, not the rubber vinyl. Chemicals take forever
Répondue par: Ritchey
Date de publication: 2021-03-22

It looks darker online, I saw a darker one at a Tacoma store, at other stores this product is ver...

It looks darker online, I saw a darker one at a Tacoma store, at other stores this product is very clear. How can I determine which one I am going to get?
Posée par: Rich
I used the CLEAR Polycarbonate panels. Lets in lots of light like a skylight. I previously put a covering over my entry with opaque panels but I really prefer the clear. Didn't like the darker panels at all.
Répondue par: HomeDepotCustomer
Date de publication: 2021-03-22

Can i attach this to pressure treated lumber?

Can i attach this to pressure treated lumber?
Posée par: scoob
I did. It made sense for an outdoor structure. I didn't find any cautionary notes not to.
Répondue par: Meaux55
Date de publication: 2020-10-16

How do I cut it into shorter lengths? (What tools work and don't work for that?)

How do I cut it into shorter lengths? (What tools work and don't work for that?)
Posée par: Scott
I used a hacksaw. It worked well.
Répondue par: Meaux55
Date de publication: 2020-10-16
  • y_2022, m_5, d_15, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_fr_CA, sid_1001027998, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 109ms
  • QUESTIONS, PRODUCT