L'événement du Centre de cadeaux pour la fête des Pères est en cours. N'attendez pas!  Magasiner l'événement

Aperçu

Modèle # 3260LSPVC-13-2-4 Internet # 1001548792

Les receveurs de douche Bathtub Replacement de Tile Redi sont conçus pour couvrir lespace laissé par la baignoire au moment de la remplacer par une douche. Faites votre choix parmi un accès à bordure simple, double, triple ou de plain-pied. Tous les modèles présentent les caractéristiques de qualité supérieure que vous attendez des receveurs de douche Tile Ready. Les bases de douche de Tile Redi sont conformes à tous les codes de plomberie nationaux et provinciaux et sont homologuées UL.

  1. Receveur de douche à bordure simple avec drain à gauche, 32 po P x 60 po L
  1. Receveur de douche monobloc préincliné avec bordure(s), parois redirigeant les éclaboussures et drain en PVC de 2 po intégrés
  1. Ce produit est carrelable. Il suffit de poser les carreaux directement sur la surface du receveur de douche.
  1. Installation rapide et facile
  1. À l'épreuve des fuites
  1. Comprend un couvercle de drain rond en acier inoxydable

Spécifications

Dimensions

Hauteur assemblé (en pouces)
7
Hauteur de l’emballage (en pouces)
62
Largeur assemblée (en pouces)
25
Largeur de l’emballage (en pouces)
62
Poids assemblé (en livres)
25
Poids de l’emballage (en livres)
42
Profondeur assemblé (en pouces)
32
Profondeur de l’emballage (en pouces)
34

Détails

Bonde incluse
Bonde incluse
Couleur possible
Gris
Emplacement du drain
Drain à gauche
Famille de couleurs de la base de douche
Jaune
Finition de la bonde de la base de douche
Chrome
Forme
Rectangulaire
Hauteur du seuil (en)
4.5
Longueur de l'article assemblé (en po)
60
Matériau de la base de douche
Polyuréthane
Nombre de côtés finis
1
Pays d'origine
US-United States
Profondeur (po)
32
Shower Base Dimensions (L x W in.)
60 x 32
Type de bonde de la base de douche
Ronde
Type de paroi / contour
Alcôve (trois murs finis)

Garanties et certifications

3 Ans De Garantie Limitée
Base de douche à seuil simple avec drain à gauche, 32 po x 60 po, 3260LSPVC-13-2-4Tile Redi Base de douche à seuil simple avec drain à gauche, 32 po x 60 po, 3260LSPVC-13-2-4Les receveurs de douche Bathtub Replacement de Tile Redi sont conçus pour couvrir lespace laissé par la baignoire au moment de la remplacer par une douche. Faites votre choix parmi un accès à bordure simple, double, triple ou de plain-pied. Tous les modèles présentent les caractéristiques de qualité supérieure que vous attendez des receveurs de douche Tile Ready. Les bases de douche de Tile Redi sont conformes à tous les codes de plomberie nationaux et provinciaux et sont homologuées UL.
Tile Redi
1001548792
CAD10462024-05-30
Home Depot Canada
Base de douche à seuil simple avec drain à gauche, 32 po x 60 po, 3260LSPVC-13-2-4 est évalué 3.5 de 5 de 38.
  • y_2024, m_5, d_30, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_6, tr_32
  • loc_fr_CA, sid_1001548792, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 71ms
  • REVIEWS, PRODUCT
Rated 3 de 5 de par shower pan Product is sturdy. Installation is not exactly as shown in the video. Following those directions, the pan gave when stepped on after being set in mortar bed. I used another type of mortar and mixed it to cake mix consistency so that the ribs on the underside of the pan would ooze down and leave no air holes between the pan and the floor. Because of the oozing, I built a sort of frame to keep the material from oozing out to bathroom floor. It does not move now! Have waterproofed and will begin tiling. Make sure you check all diy sites on internet before installing. If you are willing to do the extra research and maybe have another person around to help, I would recommend this pan.
Date de publication: 2016-09-06
Rated 3 de 5 de par Base arrived in good shape and once set in a mortar bed was solid with a decent fit. One big DRAW... Base arrived in good shape and once set in a mortar bed was solid with a decent fit. One big DRAWBACK. The base is polyurethane and requires epoxy adhesive to set tiles which was included but a nightmare in terms of pot life. In Colorado with no humidity, epoxy adhesive pot life 25 minutes. Knowing I could not set all my tiles in that time, I called Tile-Redi Technical Support. You can skim coat the base with the epoxy, let dry for 24 hours, then use normal tile mortar which I did. So why does not Tile-Redi pre-coat the bases before shipping to save the end user the manic scramble of tiling the base before losing the epoxy? For $600, that is what I'd expect. So three stars.
Date de publication: 2020-07-11
Rated 1 de 5 de par The product looks different than in the pictures .... more like compressed foam. I read the inst... The product looks different than in the pictures .... more like compressed foam. I read the instructions and watched the mfg. video at least three times each. Since I didn't have access to the plumbing from below the installation was especially complicated. Frankly there is NO way that this product can be installed by following the instructions. I tried repeatedly to set the base correctly in a 1" bed of the specified mortar mixed to the specified consistency. I finally had to abort the entire effort and dispose of about 120 lbs. of mortar. I finally devised an alternative installation plan and was able to install this satisfactorily but I still would not recommend it and wouldn't use it again.
Date de publication: 2019-04-05
Rated 3 de 5 de par This is not for an average DIY person. If installed... This is not for an average DIY person. If installed on cement slab the drain pipe has to be perfectly lined up for base to fit on to it. Not easy! When getting ready to set the base on beading mud , almost impossible to get every cavity to fill with the mud. If not done right the first time, there's no going back. If you have never used this product before, you may want to at least talk to someone that has. The drain it's self is pretty cheap. For the price of the unit I would expect better. If I was going to do it all over again I might try it, but the learning curve on your first time using this product is pretty steep. Ask around before you get started. It can turn out to be a pretty expensive mistake. Read the reviews. Reviews will tell you a lot about some of the problems and also some good things.
Date de publication: 2021-02-17
Rated 1 de 5 de par Over priced. poor quality. Installers did not want to work with it. DYI not possible. drainage an... Over priced. poor quality. Installers did not want to work with it. DYI not possible. drainage angle to steep. Difficult to lay floor because of sharp angle. Round drain harder than square to fit. very difficult to squeeze mortar to fill voids. Why don't you just make the bottom solid and flat. Bed into thin layer of thinset.
Date de publication: 2017-12-21
Rated 5 de 5 de par Great product Overall great product, little pain in the behind to install but follow the instructions and everything will go well. I have used this product many times to rebuild showers with hot mopping that has failed.
Date de publication: 2016-03-16
Rated 5 de 5 de par Worked great... Worked great
Date de publication: 2018-04-03
Rated 1 de 5 de par Overpriced styrofoam trash. AVOID TILEREDI PRODUCTS AT ALL COST. I cant believe I fell for the marketing crap around this product. Its complete trash. The design is flawed from the start. The pan traps air when you try to install and it wont sit flat against the floor. Pray you didnt do like me and set the plumbing with the idea the pan would sit against the floor, because it doesnt. Their install instructions are complete Bs. Ill be filing complaints CSPC as well.
Date de publication: 2024-01-27
  • y_2024, m_5, d_30, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_6, tr_32
  • loc_fr_CA, sid_1001548792, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 47ms
  • REVIEWS, PRODUCT

Can I use this to achieve a flush floor to shower floor? In other words I want to make it wheel chair accessable. No curb or ledge at all.

Posée par: REM2023
The customer's home where I installed this used a wheel chair to roll in her mother for a shower.
Répondue par: Verny
Date de publication: 2023-05-07

When talking about curb height is that the step in border

Posée par: joneses
Yes, Curb height is the height of the entrance threshold/step in border of the showerpan.
Répondue par: Customer Service
Date de publication: 2023-05-05

The pan seems to have some give to it. Very noisy. We followed all the directions. We painted ...

The pan seems to have some give to it. Very noisy. We followed all the directions. We painted on a water barrier over the sub floor. Is this common?
Posée par: Babs
Our contractor installed the pan on a bed of thin set, it doesn’t have any give. He also used Kerdi waterproof system on shower walls, underneath tile, and also used a flashing system sold by Tile Redi, between the pan and tile......it fit exactly, because it was made for that sized pan. We’re very satisfied with this product.
Répondue par: jonniebean
Date de publication: 2023-05-05

What size is the installed base entry so i use the right size backer board on the floor to meet the curbless entry into the shower pan?

It appears to be1.75 inches. That would be 1/2” backer board with a 1/4” underlay of thin set, 1/4” thin set under tile and then the depth of the tile.
Posée par: Anthony
Yes, on this barrier free pan, the entry is 1.75 inches.
Répondue par: Customer Service
Date de publication: 2024-04-20

Why in the video shown does it say it "replaces the need for a traditional mortar bed installatio...

Why in the video shown does it say it "replaces the need for a traditional mortar bed installation" and then shows them using a mortar bed to set the base? Could you not use an adhesive, i.e. liquid nail, silicone, mastic instead of a mortar bed? The base comes pre-sloped for the drain, is there not a way to secure as previously suggested or secured through the side-walls into the framing? I just thought it was funny that they said in the video that it didn't need a mortar bed and then shows them using a mortar bed.
Posée par: Perry
No mortar needed
Répondue par: HomeDepotCustomer
Date de publication: 2023-05-05

Does it comes with the epoxy to set the tile?

Posée par: Emil
The redi poxy is not needed to tile our shower pans, you may use any modified thinset that is on the approved list of the instructions. The redi poxy would have to be ordered separately if you want to use it.
Répondue par: Customer Service
Date de publication: 2023-04-04

Can this pan be used with pvc walls for tile just on the shower floor?

Posée par: Gretchen
No. Unfortunately our pan is designed for 1/2 inch backerboard and is to be tiled over.
Répondue par: Customer Service
Date de publication: 2023-06-06

Can you get the drain on the other end?

Posée par: PoppaD
Yes
Répondue par: Customer Service
Date de publication: 2023-05-06
  • y_2024, m_5, d_29, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_fr_CA, sid_1001548792, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 69ms
  • QUESTIONS, PRODUCT