• Panier
  • <?xml version="1.0" encoding="utf-8"?>
    NOS PRIX SONT IMBATTABLES. NOUS LE GARANTISSONS.Certaines conditions s’appliquent
    <?xml version="1.0" encoding="utf-8"?>

    Varathane Fini de bar et de table ultra épais pour verser de l'époxyde en transparent lustré, 946mL

    Modèle nº Y236000|Nº UGS 1000686141

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # Y236000 Internet # 1000686141

    Le fini pour bars et tables à verser est un époxyde ultra épais, très brillant et transparent qui assure une durabilité optimale. Idéal en tant que fini imperméable pour les dessus de bar et de table, le produit est aussi parfait pour les objets d'artisanat et pour remettre à neuf les meubles

    1. II peut être utilisé sur presque toutes les surfaces, qu'elles soient rugueuses, finies, teintées, peintes ou lisses.
    1. Une couche est aussi épaisse que 75 couches de vernis
    1. Offre une durabilité optimale
    1. Imperméable
    1. Résiste à la chaleur et aux produits chimiques
    1. Il peut être utilisé sur presque toutes les surfaces, qu'elles soient rugueuses, non finies, teintées, peintes ou lisses

    Spécifications

    Dimensions

    Hauteur assemblé
    20.5
    Hauteur de l’emballage (en pouces)
    8.66
    Largeur assemblée
    12.5
    Largeur de l’emballage (en pouces)
    5.51
    Poids assemblé
    2.5
    Poids de l’emballage (en livres)
    5
    Profondeur assemblé
    6.5
    Profondeur de l’emballage (en pouces)
    8.46

    Détails

    Certifié
    Non
    Composant de base
    Panneau en relief
    Faibles émissions de COV
    Oui
    Lustre
    Fini brillant
    Pays d'origine
    US-United States
    Quantité dans le contenant (L)
    0.94
    Surface couverte (pi²)
    6.4
    Transparence
    Lumière scintillante

    Garanties et certifications

    La garantie limitée au remplacement de produit seulement ou de remboursement de prix d'achat de produit. La preuve d'achat exigé. Car n'importe quelles investigations appellent 1-800-363-0667 ou visitent notre site Internet à www.rustoleum.ca
    Fini de bar et de table ultra épais pour verser de l'époxyde en transparent lustré, 946mLPhoto of productLe fini pour bars et tables à verser est un époxyde ultra épais, très brillant et transparent qui assure une durabilité optimale. Idéal en tant que fini imperméable pour les dessus de bar et de table, le produit est aussi parfait pour les objets d'artisanat et pour remettre à neuf les meubles
    Varathane
    1000686141
    FINI POUR COMPTOIRS ET TABLES est évalué 2.5 de 5 de 8.
    • y_2019, m_9, d_16, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_fr_CA, sid_1000686141, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 151ms
    • REVIEWS, PRODUCT
    Rated 1 de 5 de par Looks great at first but... I just finished building a new side table for my home office and ended up purchasing this product to finish the table top. Once it cured (for a minimum of 72 hours) it looked great. 'Looked' is the operative word. I put a small desk fan with rubber feet on it and noticed that after a while of running the fan, small dents appeared in the glossy finish. I thought they may have been there before so I moved the fan and a while later, new divots appeared. On a hunch I used my finger nail to see if it would cause a mark... It did. The finish is too soft to be used on a working table. I won't purchase this product any more. It cost over $100 to finish the table. FYI, I build a matching standing desk table top and finished it with a different brand of resin/epoxy and haven't encountered any issues. It is a harder finish.
    Date de publication: 2019-05-17
    Rated 4 de 5 de par Follow Instructions! I’m not sure about the reviews slamming this product. If you follow the instructions, it turns out like it’s supposed to. It IS slow to cure, but it is easy to use...This is my very first project with epoxy. I mixed the product the minimum time instructed and it turned out like a sheet of glass. Bubbled were easily removed with a heat gun. It was a little too thick to simply pour and allow to self level (skin friction), but once I used a squeegee to push it to the edges, it leveled itself out nicely.
    Date de publication: 2019-01-27
    Rated 1 de 5 de par Complete Garbage!!!! I bought this for a top clear coat for an expensive, solid maple project. Followed directions religiously.....it all bubbled and turned yellow. As an experienced wood worker.....i know things happen so i tried again. .. Same thing happened. After hours of sanding this disgusting product .....i hesitantly tried another product.....turned out perfect. Do not buy! Home Depot...pull this bunk garbage !
    Date de publication: 2018-12-24
    Rated 2 de 5 de par Didn’t read the cure time before purchase The box says it is the same as 75 coats of varnish. I think the varnish would cure faster
    Date de publication: 2018-12-20
    Rated 2 de 5 de par An exercise in frustration Unless you have great patience, which I do not possess, this product is very frustrating to use. It is just too thick to spread by itself, and it's cure time is far too long.
    Date de publication: 2018-09-23
    Rated 4 de 5 de par hard to handle bought this recently and be warned mix mix and mix some more But be careful not to induce air as you mix. i bought 3 and even though i mixed it well parts of the table didn't cure. After slowly mixing for 5 min pour the whole mixture in a new container and mix for 2 more min then pour. i learned this the hard way and now i have to redo the table top. if you don't mix well enough you have to gently wash the project with acetone and redo
    Date de publication: 2018-02-16
    Rated 1 de 5 de par Coverage listed is INCORRECT This product covers 6 sq feet NOT 25 as stated online. Home Depot does not even sell the size of epoxy to cover 25 sq feet. Annoying after driving an hour to pick up
    Date de publication: 2017-12-22
    Rated 5 de 5 de par seals wood I use this epoxy to seal the inside of my wood turnings. It makes them water proof .My wine goblet hold red wine and do not stain the wood,
    Date de publication: 2015-12-04
    • y_2019, m_9, d_16, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_fr_CA, sid_1000686141, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 28ms
    • REVIEWS, PRODUCT

    how does this epoxy sand up after ? does it sand up to a glossy shine ? or can you even sand it after it drys ? thanks

    Posée par: Marty
    You can sand this product and if you want to bring it to the same shine, you would have to sand it with finer and finer and finer sand paper until you can buff it to a shine again.
    Répondue par: Rust-Oleum Answers
    Date de publication: 2019-09-13

    I want to use this product on the surface of a table the isn't wood. What other surfaces will it adhere to?

    Posée par: JLFP
    Hi JLFP, Thank you for your question. Our bar &amp; Table Ultra Thick Clear Gloss Epoxy can be used over almost any surface; from rough and finished to stained, painted or smooth surfaces. We hope this answers your question. Feel free to contact us again if you require further information.
    Répondue par: Rust-Oleum Answers
    Date de publication: 2019-07-20

    What is the minimum temperature that the room I use it in should be? And is it heat/moisture resistant? I'm going to apply it in my garage. I plan on putting it onto the underside of an MDF shelf less than an inch above my coffee maker.

    Posée par: Tangre
    I used it at ~15C and it turned out fine. It is waterproof and heat resistant. It's not very viscous right after being mixed, so if you want a layer a couple mm thick, use masking tape to make a vertical perimeter around the board so it doesn't spill off the edges. Mix it thoroughly and slowly and use a heat gun to get rid of bubbles after you pour it.
    Répondue par: jackie27
    Date de publication: 2019-05-04
    • y_2019, m_9, d_17, h_23CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_3
    • loc_fr_CA, sid_1000686141, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 109ms
    • QUESTIONS, PRODUCT
    <?xml version="1.0" encoding="utf-8"?>