Livraison express en 3 heures à partir de 9,97 $*  En savoir plus

WEN Jauge de marquage offset en aluminium de 10 po et outil

Modèle nº ME251R|Nº UGS 1001661147

Aperçu

Modèle # ME251R Internet # 1001661147

La jauge de marquage en aluminium WEN permet de nombreuses applications pour le travail du bois utiles à un grand nombre dutilisateurs. Déverrouillez le bouton central pour faire coulisser librement la jauge davant en arrière. Cela vous permet de prendre manuellement des mesures avec une précision de 0,002 po, comparable à celle dun pied à coulisse. Léchelle de Vernier comprend des marquages métriques et impériaux, pour sadapter aux besoins de la tâche à accomplir. Cela permet aux utilisateurs de tracer les lignes de référence des pièces, daligner les guides et de définir les profondeurs de coupe exactes sur leurs tables de défonceuse ou leurs scies à table. La construction robuste en alliage daluminium offre un bord droit solide et durable, tandis que les marquages gravés au laser maximisent la précision et empêchent la décoloration.

  1. Permet la collecte manuelle des mesures avec la précision dun pied à coulisse
  1. Inclut à la fois léchelle métrique (0,05 mm) et léchelle impériale (0,002 po) de Vernier
  1. Les marquages gravés au laser maximisent la précision et ne sestompent pas avec le temps
  1. Déverrouillez le bouton central pour faire coulisser facilement la jauge davant en arrière.
  1. Tracez les lignes de référence de la pièce, définissez les profondeurs de coupe et alignez les guides

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1.25
Hauteur de l’emballage (en pouces)
1.25
Largeur assemblée (en pouces)
0.5
Largeur de l’emballage (en pouces)
3.5
Poids assemblé (en livres)
0.5
Poids de l’emballage (en livres)
0.5
Profondeur assemblé (en pouces)
12.75
Profondeur de l’emballage (en pouces)
12.75

Détails

Longueur de la règle (en po)
10
Pays d'origine
CN-China
Type
Standard
Étalon de mesure
Lime pointue

Garanties et certifications

Pour plus dinformation, veuillez contacter le 1-800-628-0525
Jauge de marquage offset en aluminium de 10 po et outilWEN Jauge de marquage offset en aluminium de 10 po et outilLa jauge de marquage en aluminium WEN permet de nombreuses applications pour le travail du bois utiles à un grand nombre dutilisateurs. Déverrouillez le bouton central pour faire coulisser librement la jauge davant en arrière. Cela vous permet de prendre manuellement des mesures avec une précision de 0,002 po, comparable à celle dun pied à coulisse. Léchelle de Vernier comprend des marquages métriques et impériaux, pour sadapter aux besoins de la tâche à accomplir. Cela permet aux utilisateurs de tracer les lignes de référence des pièces, daligner les guides et de définir les profondeurs de coupe exactes sur leurs tables de défonceuse ou leurs scies à table. La construction robuste en alliage daluminium offre un bord droit solide et durable, tandis que les marquages gravés au laser maximisent la précision et empêchent la décoloration.
WEN
1001661147
CAD20.982022-05-16
Home Depot Canada
Jauge de marquage offset en aluminium de 10 po et outil est évalué 3.9 de 5 de 9.
  • y_2022, m_5, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_fr_CA, sid_1001661147, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 79ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Easy to mark rabbits on the edge of wood with... Easy to mark rabbits on the edge of wood with this tool
Date de publication: 2022-03-25
Rated 4 de 5 de par Inch vernier scale is not designed correctly This tool feels solid and accurate. I've checked the inch marks against gage blocks and the inch scale is accurate at the the fractional 1/16" marks with the "0" on the vernier scale. That is where it ends. Like the other review earlier, the inch vernier is not designed correctly for 0.002". The vernier markings are larger than the fractional 1/16" markings, so the vernier scale should be a retrograde scale, reading in reverse to the main scale. And the markings just are not correct to read 0.002". I used the gage blocks to measure in between fractions such as 7/32 and 15/64, and the vernier decimals just don't add up. The only use I have for the vernier scale is that the "4" can be reasonably used to set 1/32 of an inch as it reasonably (but not accurately) falls between the 1/16" marks. So it is not totally useless. I have emailed Wen customer service and am still waiting on a reply. Still, it is a nice marking/measuring tool for the price.
Date de publication: 2021-01-19
Rated 1 de 5 de par need better instructions need better instructions
Date de publication: 2020-12-04
Rated 5 de 5 de par Rating provided by a verified purchaser... Rating provided by a verified purchaser
Date de publication: 2020-06-17
Rated 5 de 5 de par WEN 10-Inch Aluminum Offset Marking Gauge and Layout Tool with Laser-Etched Scale - a Home Depot ... [This review was collected as part of a promotion.] WEN 10-Inch Aluminum Offset Marking Gauge and Layout Tool with Laser-Etched Scale - a Home Depot Seeds Program Review I do some woodworking and that always involve some precision measurements and I have lots of tools to do that. This WEN 10-Inch Aluminum Offset Marking Gauge and Layout Tool with Laser-Etched Scale is now another tool in my measuring and marking collection. The height of the blade on a tablesaw or router bit need a good precision tool to measure. This offset marking gauge is aluminum that feels pretty sturdy. I don’t think it would easily deform even if drop on a hard surface but seems like it could mark or scratch pretty easily with any sharp point or blade. The metric and SAE markings are laser etched and filled white which stand out well against the black tool. The vernier scales allow measurement down to 0.002 inches or 0.05 mm which is very precise for this type of tool. My best caliper only has a 0.001 inch precision. The dimension of wood I’m working with would probably change dimensions greater than that just by breathing on it. If I were working with metal my needs would be a little different. The gauge has a foot on one end that’s wide enough that the tool can stand upright on its own. The measuring block is more than 2 ½ inches wide and very readable. The block is held on with a large, knurled knob that easily loosens for smooth adjustment and tightened to hold the measurement. The markings go from 0 to 10 inches or 0 to 250 mm but, short of removing the marking block, I haven’t found a way to mark or measure a length more than a little less than 8 ½ inches. The WEN 10-Inch Aluminum Offset Marking Gauge and Layout Tool with Laser-Etched Scale is a great and accurate tool. It’s wide enough to stand upright hands-free. The accuracy, with the vernier scale, puts it on par with a good caliper. The large locking knob is easy on the hands and holds tightly. The markings are clear and very readable. This is a marking gauge I’ll be using for a long time. Here’s the manufacturer’s website information on this product if interested: https://wenproducts.com/collections/measuring-equipment/products/10-inch-aluminum-offset-marking-gauge-and-layout-tool-with-laser-etched-scale
Date de publication: 2020-03-06
Rated 3 de 5 de par I am an experienced amateur at woodworking and plastics, mostly making toys for my grandchildren... [This review was collected as part of a promotion.] I am an experienced amateur at woodworking and plastics, mostly making toys for my grandchildren. I needed a precise marking tool to enable greater precision in my work. This marking tool is extremely well made of heavy gauge aluminum. It is coated in black paint and then etched through to make the marks, so the marks are very sharp with significant contrast making it easy to use. I have some significant questions on the most effective way to use this tool. While my questions on its use are probably due to my inexperience with such tools, I would expect to get answers readily. The product came with no instructions and the manufacturer's web site likewise contained no usage instructions or even photos of the product in use. I sent a set of questions to the manufacturer, but no reply has been received for a week. As a result, I marked the review down for usability.
Date de publication: 2020-03-03
Rated 5 de 5 de par This sliding marking scale is like all wen products it is second to none. It is well built and ve... [This review was collected as part of a promotion.] This sliding marking scale is like all wen products it is second to none. It is well built and very strong.And the accuracy is by far taking the guess work out of measuring . The accuracy being within .02000 you can not ask for more. so for precision cutting or any time you need to have accurate measurements I highly suggest this Etched measuring stick
Date de publication: 2020-03-02
Rated 3 de 5 de par Meh! This WEN 10-in Marking gauge (Model ME-251R) is an okay tool that wants to be more than it i... [This review was collected as part of a promotion.] Meh! This WEN 10-in Marking gauge (Model ME-251R) is an okay tool that wants to be more than it is. It's solid and heavy, and because of the offset it can only mark up to 7 ½ “ - the other 2 ½ “ of the rule is taken up by the sliding block. It's important to note the measurements on the scale are offset so they measure from the flat end of the gauge, not the zero mark. The aluminum is nicely machined and 1/8” thick in most places, so it won't bend or flex. The sliding block locks tightly with a knurled thumbscrew, but the screw is slightly too long; it protrudes through the block and can mar a wood surface underneath. The laser-Etched scales are nice and bright, but too thick to take full advantage of the vernier scales. The verniers are the biggest issue. The scale works fine for the metric side, with the vernier scale divided so as to measure in 0.05mm increments. As stated previously, that's a real challenge given the thickness of the etchings, but it's feasible. The imperial (inch) scale is another matter. Although the ruler is marked on 1/16” increments, the vernier is divided into 20 increments of 0.002in – meaning any measurement is a combination of fractional inches and decimal inches. Proper measurement in most cases requires converting the fractional measurement to decimal, counting out the number of vernier markings, multiplying that count by 0.002, and adding that to the converted fractional measurement. And, since the vernier scale has 20 increments, it covers a vernier range of 0.04”, meaning the maximum vernier measurement one can “add” to the fractional measurement is 0.04”. Since the smallest fractional measurement is 1/16” = 0.0625”, the vernier scale is too small to measure the full range between two 1/16”markings. When I contacted WEN customer service about this, they were very quick to respond and sent me a video of how to use the vernier scale. Unfortunately, it addressed neither of the above issues. As a cabinet maker, I would never use the vernier scales anyway, preferring 1/16 – 1/32 Inch accuracy, and I use a marking gauge to set a measurement then draw a line, not to measure a distance in the first place, so it's not important to me. If accurate imperial measurements to smaller than 1/16” are important, this is not the tool for you. As a woodworkers marking gauge, it's adequate but would not be my first choice.
Date de publication: 2020-02-27
  • y_2022, m_5, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_fr_CA, sid_1001661147, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 128ms
  • REVIEWS, PRODUCT

Does this Wen marking gauge move freely along measurements? or does it click into specific measur...

Does this Wen marking gauge move freely along measurements? or does it click into specific measurements? i am unsure if i am asking this correctly. Example: Incra makes one that clicks in place at every thousandth of an inch. so when you tighten the knob it's exactly where you wanted it. Whereas, Woodsmith's gauge moves freely and so relies on my unsteady hand & poor eyesight to be accurate. I love Wen products & this looks to be better made than the Woodsmith, it's half the cost of the Incra & the markings are clearer than the WM AND the Incra. But, i am curious about the adjustment "clicks"? Thanks.
Posée par: AuntieLisa
Moves freely.
Répondue par: JimL
Date de publication: 2020-11-18
  • y_2022, m_5, d_15, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_1001661147, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 70ms
  • QUESTIONS, PRODUCT