Achetez en ligne et ramassez en magasin ou dans le stationnement  En savoir plus

DEWALT DWV012 Extracteur de poussière HEPA 10 gallons humide et sec avec nettoyage automatique du filtre

Modèle nº DWV012|Nº UGS 1001015720

Aperçu

Modèle # DWV012 Internet # 1001015720

Le dépoussiéreur DEWALT DWV012 de 10 gallons avec nettoyage automatique du filtre est un aspirateur léger entièrement assemblé. L'appareil est doté d'un simple interrupteur permettant de sélectionner l'actionnement de l'outil. Le DWV012 dispose également de plusieurs points d'ancrage et de levage pour sécuriser les échafaudages ou pendant le transport. Ses roues robustes et ses roulettes à frein assurent la durabilité sur le chantier et son raccord de tuyau universel assure une connexion robuste avec possibilité de pivotement. Il dispose également d'une poignée télescopique facile d'accès que vous pouvez obtenir facilement d'une zone de travail à l'autre. Comprend (1) un aspirateur de 10 gallons DEWALT DWV012 avec filtre automatique, (2) des filtres HEPA et (1) un boyau anti-pliage.

  1. Puissant moteur de 15 ampères pour 140 CFM de débit d'air pour une aspiration maximale
  1. Aucun assemblage requis
  1. Peut être utilisé avec des applications humides ou sèches
  1. Puissant moteur de 15 ampères pour 140 CFM de débit d'air pour une aspiration maximale
  1. Aspiration variable pour le contrôle de la consommation d'énergie et de la quantité d'aspiration du vide
  1. Poignée télescopique pour faciliter le transport
  1. Raccord de tuyau universel pour une connexion robuste avec possibilité de pivotement
  1. Léger et portable à seulement 33.5 lbs.
  1. Roues robustes et roulettes verrouillables pour une plus grande longévité sur le chantier
  1. Plusieurs points de levage et d'arrimage pour fixer le vide à l'échafaudage ou pendant le transport
  1. Fonctionnement simple à 1 interrupteur pour la sélection de l'actionnement de l'outil ou du vide uniquement

Spécifications

Dimensions

Hauteur assemblé (en pouces)
23
Hauteur de l’emballage (en pouces)
23
Largeur assemblée (en pouces)
19.25
Largeur de l’emballage (en pouces)
19.25
Poids assemblé (en livres)
45.52
Poids de l’emballage (en livres)
45.52
Profondeur assemblé (en pouces)
28.25
Profondeur de l’emballage (en pouces)
28.25

Détails

Ampères de la batterie
12 and Over
Caractéristiques de l'aspirateur
Espace de rangement intégré pour les accessoires, Cordon d'alimentation long (plus de 6 pi), Tambour en acier inoxydable
Classe
Usage résidentiel
Diamètre du tuyau
Universel
Famille de couleurs
Jaune
Niveau de filtration intégré
Filtre HEPA
Pays d'origine
CN-China
Pile incluse
Non
Puissance maximale (Hp.)
Sans Puissance maximale
Sans fil/avec fil
Avec fil
Taille du tambour (en gallons)
Moyen (de 7 à 12 gallons)
Type d'aspirateurs
Portatif
Type de surface
Plancher nu

Garanties et certifications

Garantie de remboursement de 90 jours, service gratuit pendant 1 an, garantie limitée de 3 ans
DWV012 Extracteur de poussière HEPA 10 gallons humide et sec avec nettoyage automatique du filtreDEWALT DWV012 Extracteur de poussière HEPA 10 gallons humide et sec avec nettoyage automatique du filtreLe dépoussiéreur DEWALT DWV012 de 10 gallons avec nettoyage automatique du filtre est un aspirateur léger entièrement assemblé. L'appareil est doté d'un simple interrupteur permettant de sélectionner l'actionnement de l'outil. Le DWV012 dispose également de plusieurs points d'ancrage et de levage pour sécuriser les échafaudages ou pendant le transport. Ses roues robustes et ses roulettes à frein assurent la durabilité sur le chantier et son raccord de tuyau universel assure une connexion robuste avec possibilité de pivotement. Il dispose également d'une poignée télescopique facile d'accès que vous pouvez obtenir facilement d'une zone de travail à l'autre. Comprend (1) un aspirateur de 10 gallons DEWALT DWV012 avec filtre automatique, (2) des filtres HEPA et (1) un boyau anti-pliage.
DEWALT
1001015720
CAD7592022-08-19
Home Depot Canada
DWV012 Extracteur de poussière HEPA 10 gallons humide et sec avec nettoyage automatique du filtre est évalué 3.9 de 5 de 35.
  • y_2022, m_8, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_32
  • loc_fr_CA, sid_1001015720, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 84ms
  • REVIEWS, PRODUCT
Rated 3 de 5 de par This could be so much better! I have used this Dust Collector for about 6 months now - First off - this is a dust collector and not a shop vac ! I used this on a large drywall project - worked well at collecting the dust and then on my table saw and miter saw - worked well too. A nice feature is the auto on outlet - where you plug your tool into the dust collector and it will automatically turn on and off when you run your tool. My big pet peeves with this is that the hose really is bad - it leaves black marks everywhere! If you use this as a light shop vac - even to clean up the floor - the solid steel tubing clogs very easily! In closing - if you are buying this as a dust collector - it will do the job - If you expect this to be a shop vac - not so much!
Date de publication: 2019-05-22
Rated 5 de 5 de par awesome new product! better than the competition for sure! never was a DeWALT guy before, however I needed a new dust vac for the work sites. guy told me this was a newly released line of vac so i tried it out... AMAZING!! Definitely recommend it!
Date de publication: 2012-12-05
Rated 4 de 5 de par Great with dust Purchased this almost a year ago. Price was the main factor and job site convience. Needed a dust collector on site for the miter saw, sds hammer drills, router table etc. So far it works great, I always run it with a bag, and the filters last forever. Down side as other reievers have mentioned is the black marks from the hose. I always find my self throwing drop cloths under the saws on any finished floors just because of the marks. Pros-does a great job at dust collection, the price point was excellent compared to other brands, the filters do not cost a small fortune. Cons- the hose is stiff and leaves a lot of marks. The hose does not play nice with other brands for hook up to say grinders, router tables etc... All in all I am happy with the collector, needs some tweaks on the hose for attachments and a non marring version. Would still recommend this machine.
Date de publication: 2019-12-31
Rated 5 de 5 de par Capable Dust Extractor Oddly, this is not a shop vacuum. It is a dust extractor. You need to know that before you buy it. It is meant to connect to a tool that is producing dust (not clean your garage floor). For its intended purpose it works great. Dust collection is excellent, and it is quiet compared to my Ridgid 6.5 hp vac. The auto filter clean feature works like a charm to keep suction high. Plug your sander / biscuit joiner / router etc into the on-board outlet and turning on your tool will activate the vacuum. Variable speed is nice, and can make the vac even quieter if needed. Even at full tilt it is only 59-61 db at 3 feet away (Ridgid 6.5 hp measured 10-12 db higher). With the long hose, you can be even further away from the vac as you work. The only negative is the hose, and its weird couplings. They have a twist lock coupling that allows them to swivel... great in theory... but they are tough to turn and far too bulky for woodworking. The quick connect from the vac to the hose works fine, so I kept that. The hose itself is fine, and is a tough but fairly supple material. The hose is 1-1/4" i.d., and is plenty long. The problem for me was the tool end of the hose which required a Dewalt universal connector (not included), and a Dewalt adapter (not included). So I ordered these two parts from Dewalt and I really disliked their bulk and length. So I removed these factory accessories, and replaced them with a #24 reverse thread adapter from Mr. Nozzle. That particular fitting fits right onto the hose, and attached directly to almost all my Dewalt tools. It is a flexible fitting that will accommodate any tool port close to 1-1/2". So with that quick modification, this is a great dust extractor. The build quality is very good. The sturdy clamps that secure the power head to the canister are impressive.
Date de publication: 2016-07-14
Rated 4 de 5 de par Best shop vac Amazing shop vac, picks up everything! Dust, nails, screws, everything gets sucked up in this vacuum, and the paper bag makes cleanup easy and fast. Would be a 5* review, but the black hose marks up everything it touches so be careful. Also definitely buy the accessory kit.
Date de publication: 2018-02-22
Rated 1 de 5 de par Dissapointing I've had this vac for about 2 years using it daily on jobsites. It does a mediocre job to begin with, but stopped working altogether in the middle of a big job. I got my hands on the Bosch equivalent and can tell you there is no comparison. The Dewalt looks and feels like a child's toy compared to the Bosch. I'd avoid the Dewalt for sure.
Date de publication: 2018-03-23
Rated 2 de 5 de par Suction power and airflow is less than my Ridgid 6.5 hp shopvac, which is fine, since this is a d... Suction power and airflow is less than my Ridgid 6.5 hp shopvac, which is fine, since this is a dust extractor, not a shopvac. It doesn't come with the adapters you need to connect to many Dewalt tools, which is disappointing for a $600 machine, but not a deal breaker. The problem I have is my concern that it does not have a true HEPA performance. After using it for a clean up job with mold, the exhaust smells like mold for days, even after changing the bag. I don't even have this problem with the Ridgid when using a GoreTex HEPA filter. So in short, at 4x the price, the power, filtration is inferior. It does to well in keeping suction while filling up with fine dust due to the pulse technology, but the smell leads me to think that it may be leaking some of the smaller and more dangerous particles.
Date de publication: 2017-02-28
Rated 4 de 5 de par Great automatic dust extractor [This review was collected as part of a promotion.] This does a great job as a dust extractor in my small shop ... I’ve used it for my miter saw, oscillating sander, table saw, and other tools. The auto turn on/off feature is awesome. As many have noted, it’s not supposed to be a Shop Vac, even though it looks like it. We use it to vacuum up a lot of stuff in the garage and cars, and it does fine, but it really shine as a dust extractor. I like it ... the connector is just ok, though, and it was a bit of a pain to figure out how to hook up all my different tools, not all of which are deWalt. All in all ... great product, been working great for a year with no problems. I love DeWalt and am glad I’m in a position to start buying them again!
Date de publication: 2019-11-06
  • y_2022, m_8, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_32
  • loc_fr_CA, sid_1001015720, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

does it come with a hose that will connect to dewalt sanders and if so how long is hose

does it come with a hose that will connect to dewalt sanders and if so how long is hose
Posée par: joe
Yes it will connect to sanders and hose is 1.25" diameter and 15' long. We currently use with diamabrush concrete grinding attachment and it works great.
Répondue par: Budman1966
Date de publication: 2018-09-02

Is it a heppa vac

Posée par: Randy
Yes, It says that on the top front!
Répondue par: DAVID
Date de publication: 2019-09-22

Does this vacuum hose can be use with others tool thant Dewalt, thank you

Posée par: Leo
Yes
Répondue par: Budman
Date de publication: 2018-01-06

Is this vacuum certified for small tools for cutting/grinding concrete?

Is this vacuum certified for small tools for cutting/grinding concrete?
Posée par: dan
Yes. Works very good.
Répondue par: Budman1966
Date de publication: 2018-04-26

what size motor comes in the dewalt 10gal

what size motor comes in the dewalt 10gal
Posée par: cc
The DWV012 has a 60 Hertz 15.0 amp motor.
Répondue par: DewaltProductExpert
Date de publication: 2018-12-04

What is the pressure that the vacuum sucks with?

What is the pressure that the vacuum sucks with?
Posée par: Jonathan
This model has a 15 amp motor for 140 CFM of airflow for maximum suction.
Répondue par: Communityanswer
Date de publication: 2018-08-06

How many CFM doues it pull?

Posée par: Lrusty
155 CFM MAX
Répondue par: Budman1966
Date de publication: 2018-04-26

what is the maximum amp outlet power tool you can plug in to this?

what is the maximum amp outlet power tool you can plug in to this?
Posée par: Jeff
The rating of the outlet is 15 amps. There is no internal protection or breaker. The outlet and the vacuum are treated like an outlet strip so if the vacuum is on, and you pull an additional 15 amps from the outlet, the cord set will pull more current and cause the breaker in the wall to trip.
Répondue par: SBD_Product Expert
Date de publication: 2019-04-26
  • y_2022, m_8, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_fr_CA, sid_1001015720, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT