Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Freeman Ensemble cloueuse à charpente et cloueuse de finition

Modèle nº P4FRFNCB|Nº UGS 1000720863

Aperçu

Modèle # P4FRFNCB Internet # 1000720863

Lensemble de 4 pièces cloueuse à charpente et cloueuse de finition constitue loffre rêvée pour tout entrepreneur. Cet ensemble répondant à vos besoins en construction et finition. La trousse P4FRFNCB de Freeman comprend une cloueuse à charpente 21° (PFR2190), une cloueuse de finition à angle 34° calibre 15 (PFN1564), une cloueuse de finition calibre 18 de 1 1/4 po (PBR32) et une agrafeuse à couronne étroite calibre 18 de 1 1/4 po (PST9032), le tout prenant place dans un sac de transport en toile. Ces cloueuses présentent des cylindres en aluminium anodisé pour plus de durabilité, des garnitures en téflon limitant lusure interne, des embouts non marquants protégeant des dommages en surface, des lames d'entraînement monopièces et des déflecteurs d'éjection réglables à 360°. Les cloueuses pneumatiques de Freeman sont fabriquées selon de strictes normes assurant une qualité professionnelle.

  1. Le chargeur en aluminium anodisé contient jusqu'à 100 clous pour les applications intensives. La cloueuse à charpente peut contenir jusqu'à 55 clous
  1. Filtre à air/pare-poussière empêchant les débris de pénétrer dans la cloueuse pour assurer un rendement optimal
  1. Mécanisme de dégagement rapide (cloueuse de finition) ouvrant le boîtier de loutil pour retirer aisément les clous bloqués et réduire les pertes de temps
  1. Mollette (PFR2190 et PFN1564) réglant la profondeur denfoncement rapidement et de façon pratique
  1. Le sac de toile facilite le transport
  1. Compatible avec toutes les grandes marques de clous et dagrafes

Spécifications

Dimensions

Hauteur assemblé (en pouces)
24
Hauteur de l’emballage (en pouces)
24
Largeur assemblée (en pouces)
18
Largeur de l’emballage (en pouces)
18
Poids assemblé (en livres)
25.03
Poids de l’emballage (en livres)
26
Profondeur assemblé (en pouces)
10
Profondeur de l’emballage (en pouces)
10

Détails

Angle de la cloueuse
34
Arrivée d'air minimale recommandée en pi³ standard/min à 90 psi
1-5
Arrivée dair minimale recommandée à 90 psi (en pi³ standard/min)
2.4
Clous Calibre (cal.)
15
Pays d'origine
CN-China
Pression minimale recommandée lors du fonctionnement (en psi)
70
Sans fil/avec fil
Avec fil
Source dalimentation
À air
Système de batteries
Autre
Taille maximale de lattache (en po)
3.5
Taille minimale de lattache (en po)
2
Tension de batterie
Pas de tension précise

Garanties et certifications

Garantie limitée Freeman de 7 ans. Veuillez vous adresser au 888-669-5672 si vous avez des questions.
Ensemble cloueuse à charpente et cloueuse de finitionFreeman Ensemble cloueuse à charpente et cloueuse de finitionLensemble de 4 pièces cloueuse à charpente et cloueuse de finition constitue loffre rêvée pour tout entrepreneur. Cet ensemble répondant à vos besoins en construction et finition. La trousse P4FRFNCB de Freeman comprend une cloueuse à charpente 21° (PFR2190), une cloueuse de finition à angle 34° calibre 15 (PFN1564), une cloueuse de finition calibre 18 de 1 1/4 po (PBR32) et une agrafeuse à couronne étroite calibre 18 de 1 1/4 po (PST9032), le tout prenant place dans un sac de transport en toile. Ces cloueuses présentent des cylindres en aluminium anodisé pour plus de durabilité, des garnitures en téflon limitant lusure interne, des embouts non marquants protégeant des dommages en surface, des lames d'entraînement monopièces et des déflecteurs d'éjection réglables à 360°. Les cloueuses pneumatiques de Freeman sont fabriquées selon de strictes normes assurant une qualité professionnelle.
Freeman
1000720863
CAD3192022-09-27
Home Depot Canada
Ensemble cloueuse à charpente et cloueuse de finition est évalué 4.5 de 5 de 248.
  • y_2022, m_9, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_13, tr_235
  • loc_fr_CA, sid_1000720863, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 21ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par Well worth the price ! I’m generalling the construction of our new house. Which means I have lots of work to do. I bought this set because it was affordable and I don’t plan to use it in any continual capacity. Everything works great, looks great, and was as advertised. I had one issue, the framing nailer wouldn’t always fire, instead you could hear air exhaust around the trigger. I e-mailed Freeman with my “complaint”. The next day they called me to get my address to send me a new trigger kit. I received the kit a couple days later, installed it, and the nailer works perfectly. I was very impressed by Freeman’s support. I’d recommend this buy to a friend.
Date de publication: 2012-03-02
Rated 5 de 5 de par Wow ! What a deal on a great set of hard hitting nailers ! Got this set of nailers at a great price! ON-Line. Seven Year warranty, great service behind the nailers by Freeman. Rated all across the WEB with highest marks in reviews. I have owned the Name Brands, and had the Freeman's working hard and long enough to make an honest declaration to you guys looking for Nailers you can count on. Buy these and you will be happy! The framing nailer has been mistreated by my crew...but works everyday! It's consistant in it's power and driving nails right like you want. We use the trim nailer, and stapler a lot. Guy's don't pay too much for something else. Get a set of Freeman's and go get your job done!
Date de publication: 2015-08-19
Rated 5 de 5 de par Wish I had this kit at the start of my projects! I'm very pleased with this kit so far. I still haven't used the stapler but the other three guns have worked great from the beginning so I expect the stapler will be fine when I get around to using it. I did get 1 nail jammed while using the Brad but it was very easy to clear and has not jammed since. These seem like they'll hold up for a while and the quality looks and feels good. Important that you have an adequate size air compressor for these guns especially with the framing gun (uses a lot of air with each shot). I've done much research, I've read plenty of reviews and this kit is the best bang for your buck and has a lot of positive feedback! My thought was "I have nothing to lose anyway" since they offer a return if not satisfied. I'll be keeping my set.
Date de publication: 2013-04-20
Rated 5 de 5 de par Freeman 4 piece finishing / framing combo is a bargain Very nice combo. Well made, feels good to use. My only complaint was in using the nail gun. I had to use Grip Rite nails, as those were the only brand my local HD store carried for the angle and size my job required (demo and rebuild deck). The nail gun performed brilliantly in driving in nail after 3" nail into treated 2 x 6 lumber. But, I did have a couple of jams, and it would always stop when I got down to 3-5 nails left in the chamber. In most cases, I would drop in a new clip behind the stragglers and all was well. But, once in a while, it would jam under these conditions. My guess is this is particular to the nails I am using but I don't know for sure. I have used all the tools other than the stapler, and they have worked to perfection. And the combo bag that holds all 4 tools is not too shabby either. I have to wonder why neither Home Depot close to my home stocks this item - corporate alliances perhaps? Highly recommend this set.
Date de publication: 2012-09-25
Rated 2 de 5 de par 3 out of 4 nail guns worked! The largest nail gun in the package is poorly made and an obvious a knock-off of a better made nail gun. The tell tale sign that this gun is a knock-off, are all the extra unused bosses protruding from the cast nose piece. The casting has been sloppily honed in the nail chamber, leaving many bumps and grooves. This causes the nails to hang up inside the chamber, causing the nail to enter the wood at an angle and incapable of driving the nail home. The Aluminum feeder was nearly 5 degrees off angle, causing the nails to miss-align. I corrected that problem but with all the other issues, this tool is completely useless and now resides in the landfill. The other three nailers/staplers, are not great but they do work.
Date de publication: 2016-01-03
Rated 5 de 5 de par Great tool. Used 2 of the 4 tools so far, finisher and stapler. Works great after 6 hours of usage with porter 34 degree nails. Easy loading/unloading has not jammed once. Highly recommend and would purchase other tools by this brand.
Date de publication: 2011-11-26
Rated 5 de 5 de par Great Value for the DIY'er I had my wife purchase this for my birthday. I always have projects around the house but this is the first time I really needed multiple nail guns. Also planning on finishing my basement and will need the framing nailer as well. Used the brad and angled finish nailers for our coffered ceiling project in the formal dining room. I had never done a ceiling like this before so there was a lot of measuring and drawing done until we had the layout we liked. These guns performed fantastic. I couldn't tell you the difference between a $300 nail gun and $100 nail gun. For the average user doing DIY projects these guns should do the trick. I only had 2 small issues. 1) The non-marring tip from the finish nailer came off a few times when using it at odd angles. No big deal as it just slides back on. 2) Had to use a nail set on about 1-2% of the finish nails. This may have been operator error. When I held the gun firmly in place and pulled the trigger it seemed to set the nails properly. Only when working at odd angles did I have issues, but as I was working alone, it was unavoidable. The ceiling took about a month working only nights and weekends but we are so happy with the results. Now we need to find a nice chandelier that accentuates the amount of sweat equity I put into this project. I bet I told my wife at least 5 times that this was the best birthday present ever. FYI...I used Dewalt 2" and 2 1/2" angled finish nails and Dewalt brad nails.
Date de publication: 2016-08-08
Rated 3 de 5 de par Great product for the cost! Decent quality. OK for everyday use. Only issue is that it stops shooting with 4 nails left. Must only insert one sleeve and shoot a couple nails before inserting second sleeve of nails.
Date de publication: 2013-01-08
  • y_2022, m_9, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_13, tr_235
  • loc_fr_CA, sid_1000720863, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Do these come with nails and brads in the kit and how many?

Do these come with nails and brads in the kit and how many?
Posée par: bill
No, you have to buy them separately. If you read the specs, each gun takes a different range of sizes / guages of nails or staples. 21degree angled round head framing nails for framer (I think from 2.5" up to 3.5"), 15 gage angled finishing nails I can't recall the length range. Maybe 1.5-2.5" long, the brads are 18 G and as short as 3/4" or long as 1.5? and narrow crown 18 guage staples also come in various lengths of penetration. You have to buy the stock that best fits your project. for instance if you are nailing together little bird houses with very thin wood, you might only use 3/4" brads/ For upholstery you may need longer staples to penetrate layers of foam and still penetrate the wood. I bought the guns cause I needed a framing nailer to build a shed. I bought a 6 gallon pancake compressor by porter cable and started framing with 3" nails. Then I went to siding and used 2.5" ring shank nails still with framer. You only need to get a hose and a can of oil and off you go. Note that roofing nailers are different and work from coil stock and they are more money. Also there is a siding /fencing nailer that uses coil stock. so if you need to shoot stout, short nails for roofing or siding, you probably need a different type of nailer which might run more like 200 $ and uses a completely different type of gun and supply of nails. You can buy nails sold by porter cable, dewalt, many different companies. Just write down the specs of the guns and buy some nails for your projects as needed. Make sure to oil your guns before use with a drop or 3 of oil.
Répondue par: Chaula
Date de publication: 2020-08-20

Can the 15ga or any of the others be used to install hardy board siding?

Can the 15ga or any of the others be used to install hardy board siding?
Posée par: kdt
I wouldn’t. You would be better off using the framing nailer. I’m assuming warranty on Hardie board calls for a bigger nail than a finish nail.
Répondue par: Contractor
Date de publication: 2018-05-15

What type of oil do I need

Posée par: Daniel
none, this set comes with the oil required. Use a few drops when you are going to use it, that is all.
Répondue par: andres
Date de publication: 2020-03-29

All guns 229 dollars

Posée par: Mode
no
Répondue par: andres
Date de publication: 2020-04-02

What have you found to be the best framing nails to use with this gun?

What have you found to be the best framing nails to use with this gun?
Posée par: Stripes
I use either Grip Rite or DeWalt brand nails and they can be purchased at Home Depot.
Répondue par: Sully
Date de publication: 2021-08-22

Will the framing nailer shoot clipped head as well as full head nails?

Will the framing nailer shoot clipped head as well as full head nails?
Posée par: Profit
i love all of them i use them a lot and easy to load and easy to handle
Répondue par: connie
Date de publication: 2021-10-22

What kind of compressor do I need

Will the framing gun work with a 6gal 150 psi compressor? Will it work efficiently? Or will I need a bigger one
Posée par: Rubes
The Framing nailer will work fine with a 6 gallon 150 psi compressor. If you are firing the nailer in a more rapid fashion, you will need to slow down as it kicks on to wait for the compressor to catch up and refill the tank to supply adequate air volume for every shot.
Répondue par: Customer Service
Date de publication: 2019-09-03

what is the size of the male end on the guns for the quick connect?

what is the size of the male end on the guns for the quick connect?
Posée par: dono
This uses 3/8" quick connects.
Répondue par: Communityanswer
Date de publication: 2017-07-14
  • y_2022, m_9, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_fr_CA, sid_1000720863, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 21ms
  • QUESTIONS, PRODUCT