Noël Articles pour l’extérieur et terrasses Climatisation et chauffage Cuisine Cuisson à l'extérieur et barbecues Décor et Meubles Électricité Électroménagers Luminaires et ventilateurs de plafond Maison intelligente Matériaux de construction Organisation et entreposage Outils Peinture Plomberie Portes et fenêtres Produits nettoyants Quincaillerie Revêtements de sol Salle de bain Stores et habillages de fenêtre Terrasses, bois de consturction et composite Tous les départements Vendredi fou Centre de cadeaux des Fêtes Liste d'entretien hivernal de la maison
Magasinez les aubaines du Vendredi fou incroyables dès maintenant. Dépêchez-vous! L’événement se termine le 3 décembre.  Magasiner les articles de l’événement.

Hitachi Power Tools Micro cloueuse pour pointes de calibre 23

Modèle nº NP35A|Nº UGS 1000763464

Hitachi Power Tools Micro cloueuse pour pointes de calibre 23

Aperçu

Modèle # NP35A Internet # 1000763464

La nouvelle micro cloueuse NP35A utilise les pointes (sans tête) de calibre 23 qui laissent des trous pratiquement invisibles. Le magasin NP35 se règle automatiquement en fonction des pointes dune longueur de 1,6/1,9/2,54/3/3,5 cm (5/8, 3/4, 1, 1 3/16 et 1 3/8 po) pour une grande variété de travaux. Le bouclier de carter de grande dimension, les embouts antimarque et léchappement arrière protègent les surfaces de travail délicates des dommages coûteux. Les caractéristiques comme lindicateur visuel de recharge, le réglage de la profondeur de clouage et le magasin à grande capacité réduisent le temps darrêt et sont pratiques pour lutilisateur.

  1. Conçu pour les travaux d'ébénisterie, la pose panneaux et de moulures, l'artisanat et la pose de boiseries.
  1. Inclus Embout antimarque (x2), Coffret de transport, Lunettes de sécurité, Raccord mâle NPT de 1/4 po, Clé hexagonale
  1. Contrôle de la profondeur pour une pose affleurante dans plusieurs genres de surfaces

Spécifications

Dimensions

Hauteur assemblé (en pouces)
11.75
Hauteur de l’emballage (en pouces)
11.75
Largeur assemblée (en pouces)
12.75
Largeur de l’emballage (en pouces)
12.75
Poids assemblé (en livres)
4.65
Poids de l’emballage (en livres)
4.65
Profondeur assemblé (en pouces)
4.33
Profondeur de l’emballage (en pouces)
4.33

Détails

Arrivée d'air minimale recommandée en pi³ standard/min à 90 psi
1-5
Arrivée dair minimale recommandée à 90 psi (en pi³ standard/min)
1.9
Certifié
Clous Calibre (cal.)
23
Pays d'origine
TW-Taiwan
Pression minimale recommandée lors du fonctionnement (en psi)
65
Sans fil/avec fil
Avec fil
Source dalimentation
À air
Taille maximale de lattache (en po)
1-3/8
Taille minimale de lattache (en po)
5/8

Garanties et certifications

Hitachi garantit à l'acheteur original que ses cloueuses pneumatiques sont exemptes de tout défaut de matériau et de fabrication pendant une période de cinq (5) ans à compter de la date d'achat originale. Pour plus de détails, visitez le http://hitachipowertools.ca/fr/CustService/Warranty.
Micro cloueuse pour pointes de calibre 23Hitachi Power Tools Micro cloueuse pour pointes de calibre 23La nouvelle micro cloueuse NP35A utilise les pointes (sans tête) de calibre 23 qui laissent des trous pratiquement invisibles. Le magasin NP35 se règle automatiquement en fonction des pointes dune longueur de 1,6/1,9/2,54/3/3,5 cm (5/8, 3/4, 1, 1 3/16 et 1 3/8 po) pour une grande variété de travaux. Le bouclier de carter de grande dimension, les embouts antimarque et léchappement arrière protègent les surfaces de travail délicates des dommages coûteux. Les caractéristiques comme lindicateur visuel de recharge, le réglage de la profondeur de clouage et le magasin à grande capacité réduisent le temps darrêt et sont pratiques pour lutilisateur.
Hitachi Power Tools
1000763464
CAD1192023-12-05
Home Depot Canada
Micro cloueuse pour pointes de calibre 23 est évalué 4.8 de 5 de 167.
  • y_2023, m_12, d_4, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_167
  • loc_fr_CA, sid_1000763464, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 335ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Excellent Pin Nailer I own a 16 guage Senco finish nailer and an 18 guage Airy finish nailer. Neither tool was suitable for making picture frames. The Metabo pin nailer is perfect for the task. I have also discovered that it is good for pinning parts together while glue dries in projects that will be painted. The small holes made by the pin can be filled without leaving the dimple that is common when I use my 16 and 18 guage nailers. The only thing I find annoying is setting the depth of the pin by adjusting air pressure. I am sure that with time I will discover the optimal pressure and I will just set that pressure when I set the gun up.
Date de publication: 2019-02-28
Rated 5 de 5 de par Great pinner from the best in pneumatic guns Metabo-HPT does it again with this 23ga micro pin nailer! I have used it to install crown molding and it was great for getting into tight corners and light enough to be easy to handle when overhead nailing. All of the nails sank to a decent depth and the holes are small enough that paint fills them with no need for filler. I am currently using the Metabo-HPT 23ga Micro pin nailer for building MDF cabinets and even when bonding 2 pieces of 3/4 MDF the pins are counter sunk enough to have no need for a punch, and MDF is a hard dense material. I have zero complaints and have as much confidence in this tool as I do my Hitachi framing nailer I have been using for 15 years.
Date de publication: 2023-07-01
Rated 5 de 5 de par Lightweight, rear exhaust, easy to adjust nail dep [This review was collected as part of a promotion.] It was in May when I purchased the NP35A 23gauge pin nailer. I was building a banquette for my daughter in her dining area and needed a pin nailer or some very fine molding work I was doing. I went to Lowe's and shipped through the different nail guns and he never seen Metabo before and it made me remember the Metabo Power Grip I purchased over 12 years ago and how that tool has been so reliable and the batteries still hold a charge. It is the most handy tool for a bid variety of jobs, especially getting into right places. Sorry for getting off the main subject. The pin nailer worked perfectly for the fine nailing I had to do.
Date de publication: 2020-09-11
Rated 4 de 5 de par Light weight easy to use I built a table and wanted to pin the trim to secure it as the glue dried. The tool was easy to load and use. I liked the view window so I can see if I am low on nails.The only issue I had was adjusting the nail depth. Most of my nailers have an adjusting knob this nailer needed an allens wrench and no matter which way I adjusted the depth it was not always consistent. I had to increase the compressor pressure so I was sure no heads were exposed. It also took a while to get use to the safety trigger, it was awkward to use.
Date de publication: 2019-04-09
Rated 4 de 5 de par Great pin nailer but not perfect This is a light weight pin nailer. It has a rear exhaust which is great...no more oil mist in the face. The no mar tips look great. I didn't see any marks on white cedar so it looked to do the job really well. It's tiny like very small which is great if you need that. It will dry fire which isn't great noting like missing nails in the mag and not knowing because who really checks the nail indicator box really. The only real issue I have is that the trigger seemed flimsy and had a lot of flex to it. The one I got was made in Taiwan which is a good thing I guess. Other than the trigger and it being able to dry fire it's hard to not absolutely love this nailer. It does what it's intended.
Date de publication: 2023-07-21
Rated 2 de 5 de par Pinner is not what Hitachi claims Returned my first pin nailer because the so called countersin k adjustable nosepiece did not work . the second pinner is no different. I cannot countersink the pins even a miniscule amount. Also the owners manual appears to have the instructions for adjustment backwards. Called customer service and they were useless. I don't think they even knew that hitachi made a pin nailer. I ended up grinding the tip of the nailer and now at least the pins are mostly flush with the surface of the wood with hardwood. With softwood the pinner leaves an obtrusive dent where the pins are driven. The price of the pinner was decent but not what I expected. Does not compare to the quality and performance of my other Hitachi tools.
Date de publication: 2013-01-07
Rated 4 de 5 de par Great except for the no mar tips are crap I have bought several of these pin nailers and I Iove them. I install cabinets and use this nailer every day for hours at a time. I usually have to replace the driver about once a year, but that’s a small part. My only beef is with the new no-mar tips. They changed the material at some point to a harder rubber, which is great for durability, but the little nib it holds it in place, breaks off easily, sometimes they only last me an hour. There’s no other way for them to stay on, so you just have to trash them and get another. other than that it’s a great gun
Date de publication: 2023-09-28
Rated 5 de 5 de par Exactly what I needed [This review was collected as part of a promotion.] I bought this to pick glued drawer parts together. I quickly found other useful jobs for this nailer. It is great to pin thin or small trim, or even larger stock to hold it in place. It is small and light. The depth of set was perfect right from the box. I will be using it to apply trim on my kitchen cabinets next.
Date de publication: 2022-07-19
  • y_2023, m_12, d_4, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_167
  • loc_fr_CA, sid_1000763464, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 201ms
  • REVIEWS, PRODUCT

Will you still take if returned

Posée par: Donk
Hi Donk, yes, most products purchased on Homedepot.com can be returned however the policy varies between products. This item has a 90 day return policy. To see if an item has a return policy, please refer to the 'Specifications' portion of the item's product page where one row should be titled 'Returnable'. If returning in a Home Depot store, please bring your shipment confirmation email with the bar code or the credit card used to make the purchase for ease of return. Also, please refer to the following link for exceptions and more information. http://www.homedepot.com/c/Return_Policy We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Répondue par: THDSupport
Date de publication: 2023-05-03

How do i order this nail gun and what is the price as the page seems to be missing this information?

Posée par: JRan32
JRan32, thank you for your recent inquiry with The Home Depot. Unfortunately, the 1-3/8 in. x 23-Gauge Micro Pin Nailer with Carrying Case, Safety Glasses, Male Plug and Hex Bar Wrench has been discontinued and is no longer in stock or available to be purchased. The item will remain on the website for customer reference, and the description will be updated with “Discontinued” if it has not been already. We may have an alternate item that would suit your needs. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Répondue par: THDSupport
Date de publication: 2023-05-03
  • y_2023, m_12, d_4, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_1000763464, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 347ms
  • QUESTIONS, PRODUCT