Le Vendredi fou du printemps des Pros est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # 48-89-4604 Internet # 1001011007

Les forets en titane SHOCKWAVEMC Impact Duty de MilwaukeeMD avec la technologie RED HELIXMC sont conçus pour les perceuses à percussion et les perceuses. Dotés de la technologie de rainures à géométrie variable Variable HelixMC offrant un angle d'attaque agressif de 35° qui se termine à 15°, les forets Impact Duty en titane avec RED HELIXMC sont munis de la technologie d'évacuation rapide des copeaux Rapid Chip RemovalMC qui permet de limiter la montée en chaleur et de garder son tranchant plus longtemps. Leur pointe entaillée à 135° permet un début de perçage précis, sans glissement, pour effectuer rapidement des trous d'une grande précision. Leur revêtement de titane permet d'utiliser ces forets pour tous les travaux de perçage et leur confère une durée de vie jusqu'à 3fois supérieure à celle des forets à l'oxyde noir Black Oxide Drill BitsMC.

  1. Revêtement de titane pour une durée de vie jusqu'à 3fois supérieure à celle des forets à l'oxyde noir
  1. SHOCKWAVEMC Impact Duty, conçues pour le perçage et le perçage à percussion
  1. RED HELIXMC doté de la technologie d'évacuation rapide des copeaux Rapid Chip RemovalMC
  1. Pointe entaillée à 135° pour un début de perçage précis, sans glissement

Spécifications

Dimensions

Hauteur assemblé (en pouces)
0.29
Hauteur de l’emballage (en pouces)
5.75
Largeur assemblée (en pouces)
5.75
Largeur de l’emballage (en pouces)
0.29
Poids assemblé (en livres)
0.1
Poids de l’emballage (en livres)
0.1
Profondeur assemblé (en pouces)
1.87
Profondeur de l’emballage (en pouces)
1.87

Détails

Arbre inclus
Non
Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Universel
Diamètre de la mèche (en po)
7/64
Matériau de la mèche
Titane
Matériau de la pointe
Titane
Nombre de pièces dans l'ensemble
1
Pays d'origine
CN-China
Source dalimentation
Sans fil
Type d'accessoire pour outils à moteur
Mèches hélicoïdales
Type de mèche
Mèche pour perceuse à percussion
Type de tige
Hex
Utilisation
Métal, Bois et métal

Garanties et certifications

Pour plus d'information, veuillez contacter le 1-800-628-0525
Forets En Titane Shockwavemc De 7/64po DeMilwaukee Tool Forets En Titane Shockwavemc De 7/64po DeLes forets en titane SHOCKWAVEMC Impact Duty de MilwaukeeMD avec la technologie RED HELIXMC sont conçus pour les perceuses à percussion et les perceuses. Dotés de la technologie de rainures à géométrie variable Variable HelixMC offrant un angle d'attaque agressif de 35° qui se termine à 15°, les forets Impact Duty en titane avec RED HELIXMC sont munis de la technologie d'évacuation rapide des copeaux Rapid Chip RemovalMC qui permet de limiter la montée en chaleur et de garder son tranchant plus longtemps. Leur pointe entaillée à 135° permet un début de perçage précis, sans glissement, pour effectuer rapidement des trous d'une grande précision. Leur revêtement de titane permet d'utiliser ces forets pour tous les travaux de perçage et leur confère une durée de vie jusqu'à 3fois supérieure à celle des forets à l'oxyde noir Black Oxide Drill BitsMC.
Milwaukee Tool
1001011007
CAD9.342024-04-20
Home Depot Canada
Forets En Titane Shockwavemc De 7/64po De est évalué 4.3 de 5 de 119.
  • y_2024, m_4, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_21, tr_98
  • loc_fr_CA, sid_1001011007, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 95ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par convenient bits [This review was collected as part of a promotion.] I started using a driver recently instead of my standard drill, so I needed some hex bits like these. They are extremely convenient and snap right into the driver. They save time and keep my hands from tiring out from the extra work of tightening and loosening standard bits. They do work just fine in a standard drill as well. They do cost a little more than standard bits, but because they can be used in both drivers and drills and because these are titanium, they last longer than the black oxide bits. I'm very happy with these and will be getting more to make a complete set.
Date de publication: 2016-08-08
Rated 1 de 5 de par Broken bits After one use the 1/2” bit broke. I used the smaller bits to step up in size and they were fine but the 1/2” bit broke at the base of the shaft. Seems like some poor material to break that quick.
Date de publication: 2020-07-31
Rated 4 de 5 de par Bit that will Last! [This review was collected as part of a promotion.] Needed to replace one of bits that I broke on my last job. So I decided to get the Milwaukee Shockwave made for your impact drill. This bit is made to drill though Steel, Aluminum, Cast Iron, Duct/Sheet Metal, and Stainless Steel. I had no problem drill though 1/8" steel. I cut with very little effort. One good plus is that is coated with Titanium to help keep the bit sharp. The only negative is bit is only 1 3/8 long so it was shorter than I was replaced. Wish it was a little longer.
Date de publication: 2016-09-06
Rated 1 de 5 de par I really tried to like these drill bits .... Bought these bits because of the Milwaukee name, but have truly been disappointed. First off it is so hard to pull the bits from the case. I've cut myself pulling bits from the case before. At first I thought these bits were pretty good, but I was drilling into soft materials. When trying to drill into harder materials, its like pushing the bit through instead of actually drilling. I would not buy these again ... period.
Date de publication: 2022-07-12
Rated 4 de 5 de par Killer Drill Bits [This review was collected as part of a promotion.] Got these at the recommendation of a tradesman friend, and boy was he right. They chew through wood and aluminum quickly, efficiently, and accurately, without wandering off. I'm not smart enough or skilled enough to get into specifics on bit patterns, grooves, and all the technical stuff: They're drill bits, and they work quickly, and that's all I care about since I'm not building bridges. Great set of all the sizes you'd usually need, in a sturdy plastic case that looks like it will hold up long term.
Date de publication: 2020-12-08
Rated 1 de 5 de par Very disappointed with this set. The drill bit 5/16 broke in couple uses and the remaining bits are worn off, not as sharp with couples uses.
Date de publication: 2019-09-03
Rated 3 de 5 de par Great for multiple applications I use on a daily basis any combination of these bits for anything from wood to hard metal. I’ve noticed these will fill after a few metal jobs. But as far as using for wood they are amazing even if the top has filled from hard metal usage. I don’t know if that’s carry any kind of replacement warranty if dulled but really would like to find out. I am a heavy Milwaukee user and regular Milwaukee enthusiast as well as unofficial brand embassador. I eat sleep and breathe Milwaukee tools and I share my thoughts and enthusiasm with others.
Date de publication: 2023-02-17
Rated 5 de 5 de par Excellent Set of Bits [This review was collected as part of a promotion.] Great set of bits, no warping, sharp! Hard case for storage that is very easy to get bits in and out of. Locks to prevent spills when walking and falls out of your pocket or if you're kinda clumsy like me. Speed-wise they cut excellent, as always make sure you dimple your project before drilling to ensure the best location. The inclusion of the hexagon perfect since so many users today are using quick-change cordless drills. Very happy with these and I hope they last long term!
Date de publication: 2020-11-30
  • y_2024, m_4, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_21, tr_98
  • loc_fr_CA, sid_1001011007, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

What’s the warranty this wouldn’t even drill out my bolt was dull right out of package other one is sharp you can tell

Posée par: Ncm1291
HI Ncm1921, please contact our team at 1-800-SAWDUST.
Répondue par: Milwaukee Tool
Date de publication: 2023-05-07
  • y_2024, m_4, d_20, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_1001011007, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT