English -1002 anonymous Making a Scrollwork Mirror | Home Depot Canada
Home>Know-How Centre>Living & Bedroom>Making a Scrollwork Mirror

Making a Scrollwork Mirror

Project Overview

Making a Scrollwork Mirror

Throw your room a curve with a feminine fretwork mirror. Start with four pieces of in-stock pine scrollwork painted in your preferred colour. Single or in a trio, it makes a pretty impression.

7 Steps

  1. Sand,
  2. Assemble
  3. Position
  4. Apply clear silicone
  5. Line up
  1. Once silicone
  2. Touch up with paint,
Show all steps »

Step 1


prime and paint the 4 pieces of scrollwork that will make up the frame.


Step 2


the frame and measure to determine the size of mirror required. We used a 20" x 24" bevel-edged mirror.


Step 3


the framing sections on the mirror and mark where the frame will sit.

Apply clear silicone

Step 4

Apply clear silicone

to the parts of the scrollwork that will be in contact with the mirror.

Line up

Step 5

Line up

the guide marks and fit the frame to the mirror.

Step 6

Once silicone

has dried remove any excess with a razor knife or scraper.

Step 7

Touch up with paint,

if necessary, and hang in your preferred location.

Write a Review

You have rated

 out of 5 stars.

Do you want to submit this quick rating?

Yes No

Thank you!
Your quick rate has been submitted.

Please note it may take up to 8 hours for your quick rating to appear.

Sorry we are currently experiencing technical difficulties. Please try and resubmit your Quick Rating.

Thank you, you have already quick rated this product.  out of 5

Project Details

Skill Level: Beginner

Time: 2 hours

Before you start, read this »

Due to differing conditions, tools, and individual skills, The Home Depot® assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of attempting to replicate any of the home improvement ideas portrayed in this website Before beginning any home improvement project, review it thoroughly to ensure you or your contractor can finish the project and if any doubts or questions remain, consult local experts or authorities. Because codes and regulations vary greatly, you always should check with authorities to ensure that your project complies with all applicable local codes and regulations. Always read and observe all of the safety precautions provided by any tool or equipment manufacturer, and follow all accepted safety procedures.



Related Resources


know how event34