SharkBite Washing Machine Valve - Angle, 1/2" and 3/4" Connection

Cash Acme 3/4 inch Pressure Reducing Valve

Cash Acme pressure regulating valves are designed to reduce incoming water pressure to a safe pressure to protect plumbing components. They also help to prevent pressure surges from entering the household from the main line. High pressure can cause damage to appliances and plumbing. A pressure regulator should be installed after the main line to help protect plumbing. The Cash Acme EB-45 is a half-cartridge based pressure reducing and regulating valve with a lead free bronze body. The valve resembles traditional regulators with a spring chamber and an adjusting screw but offers the high performance of a cartridge based valve. Fitted with the SharkBite Connection system the EB-45 can be installed using a push-to-connect connection that can be installed on any combination of Copper, CPVC, or PEX Pipe.

BrassCraft Angle Valve 1/2 Inch Nominal Push Connect X 3/8 Inch Od Compression

BrassCraft 1/4-turn angle valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the floor. With a 90 degree

Watts PL-3042 3/8 In. O.D. Tube X 3/8 In. Male Iron Pipe Shut-Off Valve

Watts Quick-Connect products are designed and manufactured to be trouble free for many years of service life. Watts Quick-Connect products are designed and manufactured in polypropylene, a high performance thermal plastic material. All product are approved and certified to NSF-61. Products are available in standard imperial inch sizes. The Watts Quick-Connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper, CPVC or polybutylene piping and snap a Watts Quick-Connect fitting in place for a zero leak connection. Temperature and Pressure: Max. 150psi @ 70 Degrees F (10 Bar @ 20 Degrees C) Max. 60psi @ 140 Degrees F (4 Bar @ 60 Degrees C) Min. 33 Degrees F/1 Degrees C

John Guest 3/8 in. Polypropylene Push-to-Connect to Male Valve

The John Guest 3/8 in. x 3/8 in. Push-to-Connect to Male valves are manufactured from white polypropylene and equipped with EPDM O-rings utilizing John Guest's push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John Guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.