Everbilt Anti-Vibration Pads (4-Pack)

Whirlpool Washer Fill Hoses

These Washer Fill Hoses feature a space-saving 90-deg elbow and can be used to fill the washer with both hot and cold water. The part includes (2) high-quality nylon-braided hoses with (4) Hydro-Blue Steel anti-corrosive couplings with pre-installed EPDM washers. The hoses measure 6' L and feature a large diameter design for maximum water flow and 1700-PSI burst strength. This is an accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, but no disassembly of the appliance or repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We recommend replacing your washing machine's inlet hoses every 5 years to reduce the risk of hose failure and leaks.

Waterline Female Swivel X Compression Water Hammer Arrestor

3/8" Female Swivel X 3/8" Compression Water Hammer Arrestor prevents damages to the plumbing system due to excessive water pressure. This pressure creates a potential for failure of plumbing connections, fixtures and appliances. Protects piping, fixtures and appliances from damage and eliminates the system shock that causes banging pipes. It is maintenance free-unit piston is the only moving part.

Oatey Quadtro Wmob W/ Hammer Copper Sweat

Oatey Quadtro Washing Machine Outlet Boxes are available for commercial and residential applications that require supply valves and waste drain recessed into the wall.

SharkBite Ice Maker Box with Hammer Arrestor, 1/2" and 3/4" Connection

The SharkBite Ice Maker Outlet Box with Water Hammer Arrestor features a 1/2 in. push-fit connection and can be used with copper, CPVC or PEX lines. SharkBite Push-fit connections decrease the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, deburr, mark the pipe approximately 1 in. (for proper insertion depth), install pipe to proper depth and you are done. Water Hammer Arrestor is integrated into valve to protect your homes plumbing system and your fixtures from Water Hammer. The Kit includes the Ice Maker Outlet Box, 1/2 in. SharkBite Push-Fit x 1/4 in. O.D. Compression Quarter-Turn Ball Valve (with Water Hammer Arrestors), Faceplate Cover, 2 Support Brackets. Perfect for use behind your refrigerator, ice maker or water dispenser to provide a clean installation and allow for easy shut-off to protect your home when away and water line is not in use to guard against accidental leaks.