RAIN BIRD 1" Inline Valve

Model # B60111|Store SKU # 1001492787

Overview

Model # B60111 Store SKU # 1001492787

This residential and light commercial grade in-line valve replaces Rain Bird and other irrigation valves installed below ground with 1 inch female threaded inlet and outlet. It can be used with any 24 volt AC irrigation timer. Its unique reverse-flow design helps prevent flooding in the event of internal diaphragm failure, keeping the valve closed and saving water. This valve can be applied with all types of watering devices including Rain Bird spray heads (1800, 600), and rotors (22SA, 32SA, 42SA+, 52SA, LG3 and AG5). Use in-line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by code to protect against backflow. Check your local codes to determine what type of valve is required. After installation and before startup, always the flush system of dirt and debris manually using the valve's external bleed screw.

Designed for in-line (below ground) installation with approved back flow prevention device (not included)

1 inch female threaded inlet and outlet (use 1 inch MPT threaded pipe adapters with Teflon tape)

24 VAC, 50/60 Hz automatic operation or manual activation with bleed screw

Buna-N diaphragm offers superior performance in harsh water environments

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Products

Vigoro EZ-Flow Control Valve

Turn on the water with ease! The clever lever design eliminates the need to constantly twist or turn a difficult faucet. Just flip to easily turn on the water and get maximum flow from the high-volume valve.

View Details

Orbit 3-in-1 Drip Zone Valve/30 PSI, 1"x1"

4-in-1 Drip Irrigation Valve stands in the market as the industry's first "one piece" low-flow irrigation zone valve, filter, pressure regulator and 1/2" Drip tube adapter. Compact design fits in a 7" round valve box.

View Details

RAIN BIRD Solenoid Replacement Kit for Rain Bird 3/4" and 1" Valves

The Rain Bird Solenoid Replacement Kit is designed to replace solenoids on any Rain Bird Residential Valve. Works on all Rain Bird valves including DAS, ASVF, JTV/F, JTVAS/F and CP/F. Easy to remove and install.

View Details

Orbit 1" Auto Inline Valve

Designed to prohibit the free flow of water from a ruptured diaphragm and reduces potential water waste and flooding damage. The manual on/off bypass lever is ideal for testing and flushing sprinkler lines. The Inline Valve works with standard residential 24-volt sprinkler systems.

View Details