Dock & Fender Lines(8 products)

Patriot Docks HD Zinc-Oxide-Coated Steel Pipe Holder

The HD Pipe Holder is fastened to the aluminum dock frame with two 1/2-inch bolt/nut fasteners. The zinc-oxide-coated steel bracket clamps to 1 1/2-inch schedule 40 pipe with two 1/2-inch bolts to support the dock frame. The inside diameter measures 2 1/16-inches. The post sleeve is 12-inches long with frame connection bolts that are 8-inches apart.

Howell Galvanized Steel Stationary Dock Mud Pad

Stationary Dock Mud Pad is 1/8-inch nominal hot dip galvanized steel with 7/16" holes for 3/8" carriage bolts. The Mud Pad is used for soft bottom dock applications. It allows the dock's leg pipe to extend through the mud to the lake bed for lateral support. The corners are pointed for further strength.

Patriot Docks 32 ft. Straight Roll-in Dock with Aluminum Decking

Patriot modular aluminum marine docks provide the ultimate in shoreline enjoyment. Our 12-in. deep aluminum truss frames are expertly crafted with welded and bolted connections. We use 7/16 in. diameter aluminum chord rods, not 3/8 in. like most of our competitors. Pipe is all 1 1/2 schedule 40 electro-galvanized steel, not lighter weight steel tubing. Our pipe brackets are extra long with two - not one - stainless steel set bolts. Patriot Docks have a limited Lifetime Warranty on aluminum frame and poly and aluminum decking.

Multinautic 24 inch x 60 inch x 8 inch Hollow Dock Float

This Multinautic dock float is rotational molded with.15 in. thick walls. Top quality virgin polyethylene with ultraviolet inhibitors guaranty sturdiness and long lasting use. This premium float can be used as replacement with existing docks or the key element to a brand-new dock. Whether you install it on a wood dock or an aluminum or steel structure, the heavy-duty fabrication of this float will resist the saltwater, sun, oil and gaz spills