Siemens 50 Amp 2-Pole (GFCI) Pigtail Circuit Breaker

Schneider Electric Stab-Lok Double Pole 50 Amp 240V Circuit Breaker

Stab-lok breakers are fully interchangeable with all past breakers and deliver the same proven quality. The unique Stab-lok breaker design of only a 1/2 thick per pole, allows for the reduction of the size and weight of the loadcentre. This breaker will

Schneider Electric 15 AMP 2" Single Pole Stab-lok Plug-On GFCI Circuit Breaker

The Federal Pioneer Ground Fault circuit interrupter protects people against electrical shocks. GFCI protection is required in wet or damp areas such as bathrooms, kitchens, garages, spas, pools and outdoor receptacles. Do not connect to more than 250 feet of load conductor for the total one-way run to prevent nuisance tripping. Note: submersible pump installations require ground fault protection to the maximum sensitivity level of 10mA.

Schneider Electric Homeline Double Pole 50 Amp GFI Plug-On Circuit Breaker

The HomeLine Ground Fault circuit interrupter protects people against electrical shocks. GFCI protection is required in wet or damp areas such as bathrooms, kitchens, garages, spas, pools and outdoor receptacles. Do not connect to more than 250 feet of load conductor for the total one-way run to prevent nuisance tripping. Use solid conductor only when 14 wire is used.

Leviton 2-Pole 50 Amp 120/240-Volt 2nd Gen Wi-Fi Smart Circuit Breaker (Requires LWHEM to operate (1001865779))

Important: Requires a Whole Home Energy Monitor (LWHEM – 1001865779) to operate.Leviton 2nd Gen Smart Circuit Breakers provide unprecedented control of your Leviton Load Center, allowing circuits to be turned OFF and ON remotely, or via a predefined schedule in the My Leviton app. Combined with real-time energy consumption data, historical graphs, anomaly detection, notifications, and remote firmware updates. For applications with Automatic Transfer Switches, Leviton 2nd Gen Smart Circuit Breakers with Remote Control can be configured as either essential or nonessential. When backup generator power becomes active, an automated response will shed any loads configured as nonessential. Remotely scheduling and controlling circuits with 2nd Gen Smart Circuit Breakers gives homeowners a simple and effective way to prevent unnecessary usage and save money. Setup a schedule to turn OFF your hot water heater at night, or remotely turn off the circuit connected to your high current pump while on vacation.